Temporal resolution calibration of a single-shot autocorrelator by a picosecond pulse
Lists
Only you see this
Abstract
A new method is proposed to deduce the temporal resolution of a single-shot autocorrelator. A resolution test pattern is installed in one arm of the autocorrelator to add streaks on the beam cross section. Therefore, the autocorrelation signal is modulated when the streaked beam arrives at an autocorrelation crystal. Given the relationship between streak width and temporal delay in an autocorrelator, the temporal resolution is determined by the noncollinear angle, the streak’s width of the resolution test pattern, and the autocorrelation signal. Comparison experiments show that the proposed and conventional calibration schemes yield temporal resolutions of 65.6 and 67.8 fs/pixel, respectively, with a relative error of 3.3%. An advantage of this method is that fine temporal resolution (65.6 fs/pixel) is achievable on a short pulse (10 ps) despite the lack of a femtosecond pulse.
BibTeX
@inproceedings{wang2015temporal,
author = {Yang Wang and Xiaoping Ouyang and Haitang Qin and Daizhong Liu and Dong Yang and Lin Yang and Baoqiang Zhu and Jian Zhu and Jianqiang Zhu},
title = {{Temporal resolution calibration of a single-shot autocorrelator by a picosecond pulse}},
booktitle = {Chinese},
year = {2015},
doi = {10.3788/col201513.s21407},
}Loading related content...