Temperature Stability of a Hybrid Polarization-Maintaining Photonic Crystal Fiber Resonator and Its Application in a Resonant Fiber Optic Gyro

Nie He, Zhuoyan Li, Gongshen Zhang, An-An Liu, Ding Zhou, Peng Chen, Chengxiang Liu, Xu WuSensors 2018 · OpenReview

TL;DR

This paper tackles the critical issue of temperature-induced polarization fluctuations in resonant fiber optic gyros (RFOGs), which limit their accuracy. By comparing traditional Panda polarization-maintaining fibers (PMFs) with newer polarization-maintaining photonic crystal fibers (PM-PCFs) in fiber ring resonators (FRRs), they demonstrate that PM-PCFs significantly improve thermal stability and suppress these fluctuations.

What Problem Does This Paper Address?

Resonant Fiber Optic Gyros (RFOGs) are highly sensitive inertial sensors that measure rotation rates. They rely on fiber ring resonators (FRRs) as their core sensing element. A major challenge in RFOG performance is temperature-induced polarization fluctuations. These fluctuations arise from changes in the fiber's birefringence with temperature, causing the two polarization states of light within the resonator to drift relative to each other. This drift degrades the accuracy and long-term stability of the gyro, making it unreliable for precise navigation and sensing applications. Conventional polarization-maintaining fibers, like Panda-PMF, while designed to maintain polarization, are still susceptible to these temperature-dependent birefringence changes due to their multi-material structure and thermal expansion mismatches.

Methods

The researchers employed a multi-pronged approach:

  • Theoretical Analysis: They used the Jones matrix method to model the polarization behavior of two types of FRRs: one made entirely of Panda-PMF (FRR1) and a hybrid FRR (FRR2) incorporating a section of PM-PCF alongside Panda-PMF. This analysis focused on calculating the phase variation difference between the two polarization eigenstates (ESOPs) as a function of temperature.
  • Multiphysics Finite Element Modeling (FEM): To quantify the birefringent temperature coefficients of both Panda-PMF and PM-PCF, they used FEM. This involved creating detailed 3D models of the fiber cross-sections and simulating how temperature changes affected their refractive indices and stress distributions.
  • Experimental Setup: A custom experimental setup was designed to simultaneously measure the temperature-induced polarization fluctuations of two FRRs (FRR1 and FRR2) within a controlled temperature environment. This allowed for direct comparison of their performance.
  • Experimental Verification: The experimental results, including resonant curves and phase variation differences, were compared with theoretical predictions and FEM simulations to validate the findings.

Datasets

Not discussed in the paper. The study relies on theoretical modeling, simulation, and experimental measurements rather than pre-existing datasets.

Key Insights and Ideas

  • PM-PCF's Superior Thermal Stability: The core finding is that PM-PCFs offer significantly better temperature stability compared to traditional Panda-PMFs. This is attributed to their simpler structure (primarily silica) and the presence of air holes, which are less affected by temperature variations.
  • Hybrid FRR Effectiveness: Even a hybrid FRR, where only a portion of the ring is made of PM-PCF, shows substantial improvement in thermal stability over an all-Panda-PMF FRR. This suggests that strategic integration of PM-PCF can be a cost-effective way to enhance RFOG performance.
  • FEM as a Predictive Tool: The multiphysics FEM simulations accurately predicted the birefringent temperature coefficients, aligning well with experimental results. This validates FEM as a powerful tool for designing and optimizing fiber optic components for thermal stability.
  • Temperature-Induced Birefringence: The paper clearly illustrates how temperature changes induce stress and alter refractive indices in optical fibers, leading to birefringence variations and subsequent polarization crosstalk.

Key Results

  • Simulation: FEM simulations showed that the temperature stability of PM-PCF is approximately 11.268 times better than that of Panda-PMF.
  • Experiment:
    • The experimental setup successfully demonstrated simultaneous measurement of polarization fluctuations in two FRRs.
  • The hybrid PM-PCF FRR (FRR2) exhibited a polarization crosstalk period significantly longer than the all-Panda-PMF FRR (FRR1).
  • The temperature stability of FRR2 was found to be 3.2478 times that of FRR1.
  • Experimental results indicated that the PM-PCF's temperature stability was 12.955 times that of Panda-PMF.

Limitations and Future Work

  • Fiber Fusion Technology: The paper notes that the fineness of the hybrid FRR (FRR2) was smaller than the all-Panda-PMF FRR (FRR1) due to inconsistent light field distributions at the fusion joints. This suggests that improvements in fiber fusion technology are crucial for maximizing the benefits of PM-PCF integration.
  • Length Ratio: The study highlights that a larger proportion of PM-PCF in the total ring length (L'/L) leads to smaller temperature effects. Future work could explore optimal length ratios for different applications.
  • Application Potential: The authors conclude that PM-PCF exhibits considerable potential for FRR construction, offering a path to significantly improve the environmental adaptability and performance of RFOGs. Further research could focus on integrating PM-PCF into complete RFOG systems and evaluating their performance in real-world conditions.

Summary updated

Abstract

A fiber ring resonator (FRR) constructed using a Panda polarization-maintaining fiber does not effectively solve the problem of temperature-related polarization fluctuation, which considerably limits the detection accuracy of the resonant fiber optic gyro. The polarization-maintaining photonic crystal fiber (PM-PCF) can improve the thermal stability of the FRR. In this study, a structure that can simultaneously detect the polarization fluctuation of two FRRs is designed. We analyzed and verified the polarization phase shift errors of these two types of fibers, which are caused by the thermally induced birefringence changes. Theoretical simulation and experimental results confirm that a PM-PCF can be used to optimize the FRR, which can effectively suppress the polarization fluctuation.
BibTeX
@inproceedings{he2018temperature,
  author = {Nie He and Zhuoyan Li and Gongshen Zhang and An-An Liu and Ding Zhou and Peng Chen and Chengxiang Liu and Xu Wu},
  title = {{Temperature Stability of a Hybrid Polarization-Maintaining Photonic Crystal Fiber Resonator and Its Application in a Resonant Fiber Optic Gyro}},
  booktitle = {Sensors},
  year = {2018},
  url = {https://openreview.net/forum?id=hg9VZXi496},
}
Figure