Technological Trends and Key Communication Enablers for eVTOLs

Abdullah Abu Zaid, Baha Eddine Youcef Belmekki, Mohamed‐Slim AlouiniarXiv 2021 · arXiv

Abstract: The world is looking for a new exciting form of transportation that will cut our travel times considerably. In 2021, the time has come for flying cars to become the new transportation system of this century. Electric vertical take-off and landing (eVTOL) vehicles, which are a type of flying cars, are predicted to be used for passenger and package transportation in dense cities. In order to fly safely and reliably, wireless communications for eVTOLs must be developed with stringent eVTOL communication requirements. Indeed, their communication needs to be ultra-reliable, secure with ultra-high data rate and low latency to fulfill various tasks such as autonomous driving, sharing a massive amount of data in a short amount of time, and high-level communication security. In this paper, we propose major key communication enablers for eVTOLs ranging from the architecture, air-interface, networking, frequencies, security, and computing. To show the relevance and the impact of one of the key enablers, we carried out comparative simulations to show the superiority compared to the current technology. We compared the usage of an air-based communication infrastructure with a tower mast in a realistic scenario involving eVTOLs, delivery drones, pedestrians, and vehicles.

Introduction

Urban Air Mobility (UAM) represents a paradigm shift in transportation, moving from 2D ground traffic to 3D aerial corridors. Electric vertical take-off and landing (eVTOL) vehicles are at the heart of this revolution, promising to significantly reduce travel times in congested urban centers. However, operating these vehicles safely at high densities (NASA’s UAM Maturity Level 4 and beyond) requires a communication infrastructure far beyond current terrestrial capabilities. This paper explores the stringent requirements and key technological enablers necessary for this next-generation network.

The UAM Communication Ecosystem

The UAM environment involves complex interactions between eVTOLs, cargo drones, vertiports, and various communication links. To ensure continuous and reliable coverage, a multi-layered architecture is required, integrating terrestrial towers with aerial and space-based platforms.

Overview of the UAM ecosystem, highlighting air corridors, communication links, and altitude layers.

As illustrated in Figure 1, the UAM ecosystem is structured into predefined "air corridors" at multiple altitudes (e.g., 300m and 500m). Key requirements include ultra-reliable low-latency communication (URLLC) for autonomous navigation and "self-separation," as well as high-capacity links for passenger services. The network must support diverse connectivity modes, including Air-to-Ground (A2G), Air-to-Air (A2A), and Beyond Line-of-Sight (BLOS) links.

Key Communication Enablers

Several technological pillars are essential for supporting the UAM infrastructure:

  • Aerial Base Stations: Networked Tethered Flying Platforms (NTFPs) and UAVs provide superior line-of-sight (LOS) advantages compared to ground towers. NTFPs, connected via cable for power and data, offer the endurance needed for persistent urban coverage.
  • SWaP-Aware Computing: Due to strict Size, Weight, and Power (SWaP) constraints on aircraft, offloading intensive computation to Multi-access Edge Computing (MEC) nodes is vital. Software-Defined Networking (SDN) further provides the flexibility needed for dynamic aerial environments.
  • Sidelink Connectivity: Direct vehicle-to-vehicle (V2V) links are mandatory for real-time collision avoidance and autonomous "platooning," ensuring safety even when ground infrastructure is unavailable.
  • Spectrum Hybridization: No single frequency band is sufficient. A mix of traditional RF for wide coverage, mmWave for high-density vertiports, and Terahertz (THz) for ultra-fast data offloading is envisioned.

Methodology and Performance Analysis

To validate these enablers, the authors simulated a realistic urban scenario using stochastic geometry. eVTOL flight paths were modeled as 3D Poisson Line Processes (PLP), while base stations—including terrestrial cellular towers (CTs), UAVs, and NTFPs—were distributed using Poisson Point Processes (PPP). This allowed for the calculation of coverage probability across varying Signal-to-Interference Ratio (SIR) thresholds.

Downlink coverage probability vs. SIR threshold for terrestrial and aerial base stations in high and low corridors.

The simulation results for the downlink (DL), shown in Figure 5, reveal that aerial base stations (UAVs and NTFPs) significantly outperform ground towers at lower SIR thresholds due to better LOS conditions. However, a trade-off is observed at very high SIR thresholds; terrestrial towers demonstrate greater resilience because the clear LOS that benefits aerial stations also increases interference from neighboring cells. Additionally, performance generally improves at higher altitudes (500m) due to reduced blockage from the urban canyon.

Conclusion

While aerial base stations and advanced computing paradigms offer significant advantages for UAM connectivity, challenges remain in managing interference and meeting strict SWaP constraints. Future research must focus on global standardization to ensure interoperability across different manufacturers and service providers, paving the way for a safe and efficient urban aerial transportation system.

Summary updated

Abstract

The world is looking for a new exciting form of transportation that will cut our travel times considerably. In 2021, the time has come for flying cars to become the new transportation system of this century. Electric vertical take-off and landing (eVTOL) vehicles, which are a type of flying cars, are predicted to be used for passenger and package transportation in dense cities. In order to fly safely and reliably, wireless communications for eVTOLs must be developed with stringent eVTOL communication requirements. Indeed, their communication needs to be ultra-reliable, secure with ultra-high data rate and low latency to fulfill various tasks such as autonomous driving, sharing a massive amount of data in a short amount of time, and high-level communication security. In this paper, we propose major key communication enablers for eVTOLs ranging from the architecture, air-interface, networking, frequencies, security, and computing. To show the relevance and the impact of one of the key enablers, we carried out comparative simulations to show the superiority compared to the current technology. We compared the usage of an air-based communication infrastructure with a tower mast in a realistic scenario involving eVTOLs, delivery drones, pedestrians, and vehicles.
BibTeX
@misc{zaid2021technological,
  author = {Abdullah Abu Zaid and Baha Eddine Youcef Belmekki and Mohamed‐Slim Alouini},
  title = {{Technological Trends and Key Communication Enablers for eVTOLs}},
  year = {2021},
  eprint = {2110.08830},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2110.08830},
}
Figure