Tailoring the plasticity of topologically close-packed phases via the crystals' fundamental building blocks

Wei Luo, Zhuocheng Xie, Siyuan Zhang, Julien Guénolé, Pei-Ling Sun, Arno Meingast, Amel Shamseldeen Ali Alhassan, Xuyang Zhou, Frank Stein, Laurent Pizzagalli, Benjamin Berkels, Christina Scheu, Sandra Korte‐KerzelarXiv 2023 · DOI · arXiv

This paper, titled "Tailoring the plasticity of topologically close-packed phases via the crystals’ fundamental building blocks," offers a fresh perspective on a long-standing problem in metallurgy: how to deal with the inherent brittleness of complex intermetallic phases. By breaking down large, intimidating unit cells into simpler "building blocks," the authors demonstrate how to tune the mechanical properties of these materials at the atomic scale.

TL;DR

Researchers have developed a strategy to understand and improve the deformability of brittle, complex intermetallics by focusing on their simpler constituent "building blocks." By manipulating the atomic arrangement and chemistry within these sub-units, they successfully transitioned a notoriously brittle phase into a softer, more deformable state.

What Problem Does This Paper Address?

Topologically close-packed (TCP) phases, such as the $\mu$-phase and Laves phases, are common precipitates in high-performance superalloys used in jet engines and power plants. While they provide strength, they are also "the villains" of the microstructure—complex, brittle, and prone to cracking.

Because their unit cells are massive and geometrically intricate, understanding how they plastically deform (move dislocations) has been a nightmare for materials scientists. The gap in knowledge is significant: if we can’t understand how they deform, we can’t design them to be tougher. This paper tackles this by proposing that we shouldn't look at the whole complex unit cell, but rather the recurring, simpler "building blocks" that make it up.

Methods

The authors used a "dual-threat" approach combining high-end microscopy with heavy-duty computation:

  • Experimental: They synthesized different compositions of the Nb-Co $\mu$-phase ($Nb_6Co_7$ to $Nb_7Co_6$). They used nanoindentation to measure hardness and elastic modulus, and Scanning Electron Microscopy (SEM) to observe slip traces. To see the atoms themselves, they employed HAADF-STEM (High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy) and atomic-resolution EDS (Energy Dispersive X-ray Spectroscopy) to map exactly where the Nb and Co atoms were sitting.
  • Computational: They used Density Functional Theory (DFT) to calculate elastic properties and Generalized Stacking Fault Energy (GSFE) curves. They also used the Nudged Elastic Band (NEB) method to find the "minimum energy paths" for different deformation mechanisms, essentially simulating how atoms move past each other during a slip event.

Datasets

This is a fundamental materials science study, so it does not use large external machine-learning datasets. Instead, it generates original experimental and simulated data:

  • Atomic-resolution elemental maps of Nb-Co alloys.
  • DFT-calculated shear moduli and energy barriers for various slip systems.
  • A novel mathematical analysis for motif extraction from STEM images to measure interplanar spacings with sub-Angstrom precision.

Key Insights and Ideas

  • The Building Block Archetype: The complex $\mu$-phase is actually an "intergrowth" of simpler Laves phase layers ($MgCu_2$-type) and $Zr_4Al_3$-type layers. The authors found that the plasticity of the whole $\mu$-phase is essentially dictated by what happens inside the Laves phase building block.
  • Structural Softening: Moving from a bulk Laves phase to a $\mu$-phase changes the "breathing room" between atomic planes. Specifically, the interplanar spacing ($d_{t-k}$) increases, which lowers the energy barrier for slip, making the $\mu$-phase naturally softer than its Laves cousin.
  • The "Pure Nb Slab" Effect: By shifting the composition from $Nb_6Co_7$ to $Nb_7Co_6$, the authors forced Nb atoms to replace Co atoms in the "triple layer" of the building block. This effectively turned a mixed Nb-Co layer into a slab of pure Nb.
  • Mechanism Transition: This chemical substitution triggered a fundamental shift in how the material moves. It went from synchroshear (a complex, high-energy multi-step shuffle) to simple crystallographic slip, and finally to a "glide-and-shuffle" mechanism in the Nb-rich version.

Key Results

  • Hardness & Modulus Reduction: The $\mu$-phase is significantly softer than the C15-$NbCo_2$ Laves phase. Within the $\mu$-phase, increasing the Nb content dropped the hardness from 12.6 GPa to 10.9 GPa and the elastic modulus from 257 GPa to 243 GPa.
  • Primary Deformation Site: DFT revealed that the $MgCu_2$ building block is about 12–16% more compliant than the $Zr_4Al_3$ block, meaning deformation is localized in specific parts of the unit cell.
  • Low Energy Stacking Faults: In the Nb-rich $\mu$-phase ($Nb_7Co_6$), the "glide-and-shuffle" mechanism creates stacking faults with a very low energy (only 7.6 $mJ/m^2$), explaining why this composition is more deformable.

Limitations and Future Work

The study primarily focuses on basal slip (deformation along the main horizontal planes of the crystal). While this is the dominant mechanism observed, the authors note that non-basal slip—which would be required for full "ductility"—was not visible in their room-temperature tests.

The next step is to apply this "building block" logic to other complex systems, like MAX phases or multi-component superalloys. The ultimate goal is to "mine" existing crystal databases to find other complex phases that might be hidden gems of ductility, waiting to be unlocked by specific atomic substitutions.

Summary updated

Abstract

Brittle topologically close-packed precipitates form in many advanced alloys. Due to their complex structures little is known about their plasticity. Here, we present a strategy to understand and tailor the deformability of these complex phases by considering the Nb-Co μ-phase as an archetypal material. The plasticity of the Nb-Co μ-phase is controlled by the Laves phase building block that forms parts of its unit cell. We find that between the bulk C15-NbCo$_2$ Laves and Nb-Co μ-phase, the interplanar spacing and local elastic modulus of the Laves phase building block change, leading to a strong reduction in hardness and elastic modulus, as well as a transition from synchroshear to crystallographic slip. Furthermore, as the composition changes from Nb$_6$Co$_7$ to Nb$_7$Co$_6$, the Co atoms in the triple layer are substituted such that the triple layer of the Laves phase building block becomes a slab of pure Nb, resulting in inhomogeneous changes in elasticity and a transition from crystallographic slip to a glide-and-shuffle mechanism. These findings open opportunities to purposefully tailor the plasticity of these topologically close-packed phases in bulk, but at the atomic scale of interplanar spacing and local shear modulus of the fundamental crystal building blocks in their large unit cells.
BibTeX
@misc{luo2023tailoring,
  author = {Wei Luo and Zhuocheng Xie and Siyuan Zhang and Julien Guénolé and Pei-Ling Sun and Arno Meingast and Amel Shamseldeen Ali Alhassan and Xuyang Zhou and Frank Stein and Laurent Pizzagalli and Benjamin Berkels and Christina Scheu and Sandra Korte‐Kerzel},
  title = {{Tailoring the plasticity of topologically close-packed phases via the crystals' fundamental building blocks}},
  year = {2023},
  eprint = {2303.05858},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2303.05858},
}

Loading related content...

Figure