Tailoring eg Orbital Occupancy of Fe in Ni-Doped Na4.3Fe3(PO4)2P2O7 Cathode for High-Performance Sodium-Ion Batteries

X.h Wang, Yi Xu, Jianhua Zhang, Yukun Xi, Ningjing Hou, Y Q Chen, Dongzhu Liu, Zihao Yang, Hang Wen, Jia Kang, Xiaoli Yang, X Y Song, Jingjing Wang, Wenbin Li, Jiujun Zhang, Kun Zhang, Xifei LiNano-Micro 2026 · DOI

TL;DR

This paper tackles the low electronic conductivity challenge in Na<sub>4</sub>Fe<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub>P<sub>2</sub>O<sub>7</sub> (NFPP) cathodes for sodium-ion batteries (SIBs) by introducing Ni<sup>2+</sup> doping. This doping creates an "electron transfer expressway" through Ni-Fe electronic coupling, significantly boosting electron transport and Na<sup>+</sup> diffusion, leading to impressive rate capability and cycling stability.

What Problem Does This Paper Address?

Sodium-ion batteries (SIBs) are a promising alternative to lithium-ion batteries due to the abundance and cost-effectiveness of sodium. However, their widespread adoption hinges on the development of high-performance cathode materials. Na<sub>4</sub>Fe<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub>P<sub>2</sub>O<sub>7</sub> (NFPP) is a strong candidate due to its stable NASICON structure and earth-abundant iron, but its practical use is severely limited by its inherently poor electronic conductivity. This sluggish electron transport hinders fast charging and discharging, making it unsuitable for many applications.

Methods

The researchers employed a sol-gel method to synthesize NFPP and various transition metal-doped NFPP samples (NFPP-Ni, NFPP-Mn, NFPP-Co, NFPP-Cu, and NFPP-Zn). They then utilized a comprehensive suite of characterization techniques to understand the structural, electronic, and electrochemical properties:

  • Structural Analysis: X-ray Diffraction (XRD) and Rietveld refinement confirmed the structural integrity of the doped materials. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) provided insights into morphology and microstructure.
  • Electronic Structure: X-ray Photoelectron Spectroscopy (XPS) and X-ray Absorption Near Edge Structure (XANES) were crucial for probing the valence states and electronic interactions between Fe, Ni, and O. Density Functional Theory (DFT) calculations were used to model electronic structures and charge distributions.
  • Electrochemical Performance: Galvanostatic charge-discharge (GCD) cycling, cyclic voltammetry (CV), rate capability tests, and long-term cycling tests were performed to evaluate the battery performance. Electrochemical Impedance Spectroscopy (EIS) and in-situ XRD were used to investigate ion diffusion kinetics and structural evolution during cycling.
  • Magnetic Properties: Temperature-dependent magnetic susceptibility measurements were used to determine the effective magnetic moments and subsequently calculate the e<sub>g</sub> orbital occupancy of Fe.

A novel aspect of this work is the systematic investigation of how the e<sub>g</sub> orbital occupancy of Fe, modulated by different transition metal dopants, influences the Fe-O covalency and ultimately the electrochemical performance.

Datasets

Not discussed in the paper. The study focuses on experimental synthesis and characterization of novel materials.

Key Insights and Ideas

  • Ni<sup>2+</sup> as an "Electron Transfer Expressway": Ni<sup>2+</sup> doping creates an unconventional electron transfer pathway, acting as an intermediate bridge between Fe and O. This "electron transfer expressway" significantly enhances electron transport within the NFPP cathode.
  • e<sub>g</sub> Orbital Occupancy as a Descriptor: The study establishes a quantitative relationship between the e<sub>g</sub> orbital occupancy of Fe and the Fe-O covalency. This relationship follows a volcano-type curve, suggesting that an optimal e<sub>g</sub> occupancy is crucial for maximizing electrochemical activity.
  • Modulating Fe-O Covalency: Ni<sup>2+</sup> doping precisely tunes the Fe-O covalent bonding by altering the e<sub>g</sub> orbital occupancy of Fe. This optimized covalency balances lattice strain and facilitates Na<sup>+</sup> migration, leading to improved stability and kinetics.
  • Synergistic Effects: The Ni-Fe electronic coupling not only boosts electron transport but also mitigates lattice strain during cycling, contributing to the enhanced rate capability and long-term cycling stability.

Key Results

  • Enhanced Specific Capacity: The NFPP-Ni cathode delivered a specific capacity of 121.0 mAh g<sup>-1</sup> at 0.1C, significantly higher than pristine NFPP (109.83 mAh g<sup>-1</sup>) and NFPP-Mn (101.43 mAh g<sup>-1</sup>).
  • Impressive Rate Capability: NFPP-Ni maintained a capacity of 80.9 mAh g<sup>-1</sup> even at a high rate of 10C.
  • Superior Cycling Stability: NFPP-Ni demonstrated excellent cycling performance, retaining 89.1% of its capacity after 1000 cycles at 1C.
  • Reduced Band Gap and Increased Conductivity: NFPP-Ni exhibited a reduced band gap (1.69 eV) and significantly higher electronic conductivity compared to NFPP and NFPP-Mn.
  • Optimized Fe-O Covalency: The study identified an optimal e<sub>g</sub> orbital occupancy for Fe in NFPP-Ni, leading to a moderate Fe-O covalency that balances binding strength and facilitates ion transport.

Limitations and Future Work

  • Doping Amount Optimization: While the study explored various dopants, the optimal doping concentration of Ni was identified to be around 0.1 (NFPP-Ni-0.1) for best performance. Further fine-tuning of doping levels could potentially yield even better results.
  • Full Cell Performance: While a full cell was assembled and tested, the paper could benefit from more extensive full-cell testing under various conditions to fully validate the practical applicability.
  • Mechanism Exploration: The paper proposes a strong correlation between e<sub>g</sub> orbital occupancy, Fe-O covalency, and electrochemical performance. Future work could delve deeper into the precise theoretical underpinnings of this relationship and explore other dopants that might exhibit similar beneficial effects.
  • Scalability: The synthesis method (sol-gel) is generally scalable, but further research would be needed to confirm its feasibility for industrial-scale production of NFPP-Ni cathodes.

Summary updated

Abstract

Na<sub>4</sub>Fe<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub>P<sub>2</sub>O<sub>7</sub> (NFPP) is regarded as a prospective cathode for sodium-ion batteries (SIBs) because of its high structural stability and cost-effectiveness. However, its practical application is hindered by intrinsically low electronic conductivity. Herein, an unconventional electron transfer mechanism from Ni<sup>2+</sup> to Fe<sup>3+</sup> ions is unveiled in Ni-doped Na<sub>4.3</sub>Fe<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub>P<sub>2</sub>O<sub>7</sub> (NFPP-Ni) cathode, which facilitates electronic coupling within the Fe-O-Ni coordination unit and thereby effectively boosts electron transport. Moreover, the redox kinetics and reversibility of NFPP materials are predominantly governed by the degree of Fe-O covalency. The intermediate e<sub>g</sub> occupancy of Fe<sup>2+</sup>, modulated by the presence of Ni<sup>2+</sup>, optimizes the overlap between Fe d and O p orbitals. The adjustment of Ni dopant strikes a balance between accelerating Na<sup>+</sup> diffusion kinetics and mitigating lattice strain during cycling. As a result, the NFPP-Ni electrode displays impressive rate capacity (121.0 mAh g<sup>-1</sup> at 0.1C / 80.9 mAh g<sup>-1</sup> at 10C) and stable cyclability (89.1% capacity retention after 1000 cycles). More importantly, the relationship between Fe e<sub>g</sub> orbital occupancy and Fe-O covalency in NFPP as modulated by various transition metal cations (Ni<sup>2+</sup>, Mn<sup>2+</sup>, Zn<sup>2+</sup>, Co<sup>2+</sup> and Cu<sup>2+</sup>) with different electron configurations are systematically elucidated, thereby providing insights for the commercial development of sodium-ion batteries (SIBs). Tuning the e<sub>g</sub> orbital occupancy of Fe in Na<sub>4.3</sub>Fe<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub>P<sub>2</sub>O<sub>7</sub> cathode can effectively optimize the spatial overlap between Fe d and O p orbitals with excellent rate capability for sodium-ion batteries. The e<sub>g</sub> could be a significant descriptor for Fe-O covalency that describes a volcano curve as a function of e<sub>g</sub>.
BibTeX
@inproceedings{wang2026tailoring,
  author = {X.H Wang and Yi Xu and Jianhua Zhang and Yukun Xi and Ningjing Hou and Y Q Chen and Dongzhu Liu and Zihao Yang and Hang Wen and Jia Kang and Xiaoli Yang and X Y Song and Jingjing Wang and Wenbin Li and Jiujun Zhang and Kun Zhang and Xifei Li},
  title = {{Tailoring eg Orbital Occupancy of Fe in Ni-Doped Na4.3Fe3(PO4)2P2O7 Cathode for High-Performance Sodium-Ion Batteries}},
  booktitle = {Nano-Micro},
  year = {2026},
  doi = {10.1007/s40820-026-02073-3},
}
Figure