Synthesis of TiO2 nanoparticles by premixed stagnation swirl flames

Junjing Wang, Shuiqing Li, Wen Yan, Stephen D. Tse, Qiang YaoProceedings of the Combustion Institute 2010 · DOI

TL;DR

This paper introduces a novel "stagnation swirl flame" (SSF) technique for synthesizing high-purity anatase TiO2 nanoparticles. The SSF offers a promising route for scalable production of these crucial photocatalytic materials, demonstrating improved precursor loading capacity and controlled particle size compared to existing methods.

What Problem Does This Paper Address?

Titanium dioxide (TiO2) nanoparticles, particularly in their anatase phase, are highly sought after for their applications in environmental and energy solutions, such as photocatalysis, photovoltaics, and water splitting. The effectiveness of TiO2 in these applications is critically dependent on its particle size, crystal structure (polymorph), and phase purity. Specifically, anatase is preferred for photocatalytic activity, and it is thermodynamically stable for particle sizes below 11 nm. Producing these ultrafine, high-purity anatase nanoparticles in a scalable and controlled manner presents a significant challenge. Existing flame synthesis methods, while promising, face limitations in terms of scale-up, potential for particle clogging, and control over particle growth and sintering, especially on the substrate after deposition. This paper aims to address these limitations by developing and characterizing a new flame synthesis configuration.

Methods

The core of this research is the development and application of a novel stagnation swirl flame (SSF) for TiO2 nanoparticle synthesis. This technique combines features of stagnation flames (which use a cooled substrate to control particle deposition and temperature gradients) and swirl flames (known for their stability and reduced emissions).

Key methodological aspects include:

  • SSF Setup: A turbulent, premixed SSF is employed. The setup involves a downward-pointing burner with an integrated swirler to introduce controlled turbulence and swirl. A cooled substrate is positioned below the burner exit, with adjustable distance.
  • Flame Stabilization: The SSF can be stabilized either near the burner (b-SSF) or near the substrate (s-SSF), offering flexibility in controlling flame characteristics.
  • Precursor Delivery: Titanium tetraisopropoxide (TTIP) is used as the precursor, vaporized and mixed with the fuel (methane), oxidizer (oxygen), and diluent (nitrogen) before entering the burner.
  • Parameter Variation: The study systematically investigates the effects of:
  • Substrate-burner distance ($d_{s-b}$): Varied to influence temperature gradients and residence times.
  • Dilution ratio ($\alpha$): Adjusted by varying nitrogen flow to control flame temperature.
  • Precursor loading rate: Controlled by the carrier gas flow rate of TTIP.
  • Characterization Techniques:
    • BET (Brunauer-Emmett-Teller): Used to determine the specific surface area (SSA) of the synthesized nanoparticles, from which average particle diameters ($d_{BET}$) are calculated.
  • TEM (Transmission Electron Microscopy): Used to visualize particle morphology, size distribution, and assess agglomeration.
  • XRD (X-ray Diffraction): Employed to determine the crystalline phase (anatase, brookite, rutile) of the collected nanoparticles.
  • Thermocouples: Used to measure flame temperatures.
  • Molecular Dynamics (MD) Simulations: To specifically investigate the sintering behavior of TiO2 nanoparticles on the substrate after deposition, MD simulations were performed using the Matsui-Akaogi (MA) potential. This is a novel aspect, as theoretical studies on substrate sintering are rare. Simulations explored the sintering of two 2 nm anatase TiO2 particles at various initial temperatures.

Datasets

Not discussed in the paper. The study focuses on experimental synthesis and simulation, not on training or evaluating models on pre-existing datasets.

Key Insights and Ideas

  • Novel SSF Configuration: The SSF successfully bridges the gap between stable, low-swirl flames and substrate-stabilized stagnation flames, offering a robust platform for nanoparticle synthesis.
  • Scalability Advantage: The SSF demonstrates a significantly higher precursor loading flux capacity for producing nanoparticles of a given size (e.g., ~6 nm) compared to previous laminar premixed stagnation flat flames, indicating a strong potential for industrial scale-up.
  • Controlled Particle Size: The SSF allows for the synthesis of ultrafine anatase TiO2 nanoparticles with mean diameters in the desirable 5–10 nm range, with high anatase purity.
  • Flame Stabilization Flexibility: The ability to stabilize the flame near the burner (b-SSF) or the substrate (s-SSF) provides control over particle formation and deposition characteristics. The s-SSF mode, in particular, yielded a more consistent particle size across varying substrate-burner distances.
  • Suppressed Substrate Sintering: Crucially, both experimental TEM observations and MD simulations strongly support the finding that significant sintering and growth of TiO2 nanoparticles do not occur on the cold substrate under the experimental conditions. This is a key differentiator from some previous studies and is vital for maintaining the desired nanoparticle properties.
  • MD Simulations Validate Experiments: The MD simulations provide a theoretical basis for the experimental observations, showing that while sintering can occur at high initial particle temperatures (simulating particles arriving hot from the flame), it is suppressed at lower temperatures representative of the cooled substrate.

Key Results

  • Particle Size: Synthesized TiO2 nanoparticles had mean diameters of 5–10 nm, confirmed by BET and TEM.
  • Phase Purity: Collected nanopowders were almost completely anatase dominant, with negligible rutile content.
  • SSA: For the s-SSF cases, SSA remained relatively constant (274–290 m²/g), corresponding to $d_{BET}$ of 5.4–5.7 nm. For b-SSF, SSA decreased with increasing $d_{s-b}$ (277 to 184 m²/g), with $d_{BET}$ increasing from 5.7 to 8.5 nm.
  • Precursor Loading: For s-SSF with $d_{s-b}$ = 18 mm, increasing carrier gas flow rate from 0.5 to 2.0 L/min linearly increased $d_{BET}$ from 5.0 to 8.4 nm.
  • Growth Factor: TEM images of particles in the flow field and on the substrate showed minimal growth, with particle sizes before and after deposition being as close as 6.4 nm and 6.8 nm, respectively.
  • MD Simulation Outcomes: Simulations showed that at low initial particle temperatures (573 K), particles neck but do not fully sinter, forming soft agglomerates. At high initial temperatures (1473 K), complete sintering into a larger particle occurs. This highlights the importance of substrate temperature.

Limitations and Future Work

  • Substrate Temperature: While the substrate was maintained at 110±5°C to avoid condensation and limit sintering, the paper notes that if substrate cooling were insufficient and particles reached elevated temperatures, significant sintering and growth would occur, as demonstrated by the MD simulations at higher initial temperatures. This implies that precise temperature control of the substrate is critical for achieving the reported results.
  • MD Simulation Scope: The MD simulations focused on the sintering of two individual nanoparticles. While this provides fundamental insight, real-world deposition involves a larger ensemble of particles and complex interactions.
  • Future Work: The paper implicitly suggests that the SSF configuration is promising for commercial production. Future work would likely involve further optimization of operating parameters for specific applications, detailed investigation of the influence of different precursors, and scaling up the SSF system to industrial levels. The authors also highlight the need for more theoretical studies on particle sintering and growth on substrates.

Summary updated

BibTeX
@inproceedings{wang2010synthesis,
  author = {Junjing Wang and Shuiqing Li and Wen Yan and Stephen D. Tse and Qiang Yao},
  title = {{Synthesis of TiO2 nanoparticles by premixed stagnation swirl flames}},
  booktitle = {Proceedings of the Combustion Institute},
  year = {2010},
  doi = {10.1016/j.proci.2010.05.022},
}
Figure