Synthesis and Self-Assembly of Hydroxypropyl Methyl Cellulose-block-Poly(ε-caprolactone) Copolymers as Nanocarriers of Lipophilic Drugs

Aijing Lu, Eddy Petit, Yuandou Wang, Feng Su, Suming LiACS 2020 · DOI

TL;DR

Researchers have developed new biodegradable nanocarriers made from hydroxypropyl methyl cellulose (HPMC) and poly(ε-caprolactone) (PCL) that can effectively encapsulate and deliver lipophilic drugs like curcumin. These HPMC-PCL micelles show promising potential for cancer therapy due to their biocompatibility and tunable drug release properties.

What Problem Does This Paper Address?

Delivering lipophilic drugs, especially those used in cancer treatment, presents a significant challenge. These drugs often have poor water solubility, which limits their bioavailability and effectiveness when administered conventionally. To overcome this, researchers are exploring the use of nanocarriers that can encapsulate these drugs, improve their solubility, and control their release within the body. While various polymeric nanocarriers exist, there's a continuous need for new, biocompatible, and biodegradable materials that can be synthesized efficiently and offer tunable properties for specific drug delivery applications. This paper addresses this need by developing and characterizing novel HPMC-PCL block copolymers as potential nanocarriers for lipophilic anticancer drugs.

Methods

The synthesis of the HPMC-PCL block copolymers involved a multi-step process. First, an amino-terminated poly(ε-caprolactone) (NH2-PCL) was synthesized via ring-opening polymerization of ε-caprolactone, using a protected amino alcohol as an initiator. The protecting group was then removed to yield the free amine. Subsequently, reductive amination was employed to couple the NH2-PCL with the hemiacetal end-group of hydroxypropyl methyl cellulose (HPMC).

The synthesized copolymers and their precursors were thoroughly characterized using a suite of analytical techniques:

  • Nuclear Magnetic Resonance (NMR) spectroscopy (¹H NMR and DOSY-NMR): Used to confirm the chemical structure and the successful coupling of the HPMC and PCL blocks. DOSY-NMR was particularly useful in demonstrating that both blocks were part of the same polymer chain.
  • Fourier Transform Infrared (FT-IR) spectroscopy: Provided further confirmation of the chemical structure by identifying characteristic functional groups of both HPMC and PCL in the copolymer.
  • Kaiser test: A specific chemical test used to detect the presence of primary amines, confirming the successful deprotection of the PCL and the subsequent reaction during amination.
  • Gel Permeation Chromatography (GPC): Used to determine the molar mass and dispersity (Đ) of the synthesized polymers.
  • Dynamic Light Scattering (DLS) and Transmission Electron Microscopy (TEM): Employed to characterize the self-assembly behavior of the copolymers in water, determining the size, size distribution, and morphology of the resulting micelles.
  • Fluorescence Spectroscopy: Used to determine the critical micelle concentration (CMC) of the copolymers, which indicates the concentration at which micelles begin to form.
  • In vitro drug release studies: Performed using dialysis methods to assess how quickly curcumin was released from the micelles over time.
  • MTT assay: A standard cell viability assay used to evaluate the cytocompatibility of the HPMC-PCL micelles with L929 cells.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Bio-based and Biodegradable Nanocarriers: The use of HPMC, a readily available and biocompatible polysaccharide, combined with the biodegradable polyester PCL, creates a promising class of nanocarriers derived from renewable resources.
  • Tunable Micelle Formation: The size of the self-assembled micelles could be effectively controlled by adjusting the length of the hydrophilic HPMC block, with longer HPMC chains leading to larger micelles.
  • Controlled Drug Loading: The amount of lipophilic drug (curcumin) that could be loaded into the micelles was directly influenced by the length of the hydrophobic PCL block. Longer PCL blocks resulted in higher drug loading capacity and efficiency.
  • Modulated Drug Release: The release rate of the encapsulated drug was found to be dependent on both the PCL block length and the drug loading. Longer PCL blocks and higher drug loads led to slower drug release, offering a mechanism for sustained delivery.
  • Excellent Biocompatibility: The HPMC-PCL micelles demonstrated outstanding cytocompatibility, showing minimal toxicity to L929 cells even at relatively high concentrations, which is crucial for in vivo applications.

Key Results

  • Successful Synthesis: A series of HPMC-PCL diblock copolymers with varying HPMC and PCL block lengths were successfully synthesized and characterized using NMR, FT-IR, and other techniques.
  • Micelle Formation: The copolymers self-assembled in water to form spherical micelles with diameters around 200 nm (as measured by DLS), with TEM revealing smaller sizes (50-100 nm) likely due to dehydration.
  • Critical Micelle Concentration (CMC): The CMC values were found to be very low (in the range of 0.0009-0.012 mg/mL), indicating efficient micelle formation even at low copolymer concentrations. Longer PCL blocks led to lower CMCs.
  • Curcumin Loading: Drug loading content (DLC) ranged from 3.8% to 8.2%, and drug loading efficiency (DLE) ranged from 36.4% to 75.8%. Higher DLC and DLE were achieved with longer PCL blocks.
  • Drug Release Profile: A biphasic release pattern was observed, with an initial burst release followed by a slower sustained release over 120 hours. Faster release was associated with shorter PCL blocks and lower drug loading.
  • Cell Viability: MTT assays showed that cell viability remained above 80% even at high concentrations of HPMC-PCL micelles, indicating excellent biocompatibility.

Limitations and Future Work

The authors acknowledge that the micelle size observed by TEM was smaller than that measured by DLS, which they attribute to dehydration during TEM sample preparation. While the study demonstrates promising results for curcumin delivery, further in vivo studies are needed to fully evaluate the therapeutic potential of these HPMC-PCL nanocarriers for cancer treatment. Future work could focus on optimizing the copolymer composition for specific drugs, exploring different drug loading strategies, and conducting preclinical trials to assess efficacy and safety in animal models. Investigating the long-term degradation and clearance of these nanocarriers in vivo would also be valuable.

Summary updated

Abstract

A series of amphiphilic diblock copolymers with different hydrophilic and hydrophobic block lengths were synthesized by reductive amination of hydroxypropyl methyl cellulose (HPMC) and end-functionalized poly(ε-caprolactone) (PCL). NH2-PCL was synthesized by ring-opening polymerization of ε-caprolactone using 3-(Boc-amino)-1-propanol as the initiator, followed by removal of the Boc group with trifluoroacetic acid treatment. Proton NMR, DOSY-NMR, Fourier transform infrared, and the Kaiser test confirmed the successful synthesis of HPMC–PCL diblock copolymers. The copolymers were able to self-assemble by dissolution in water, yielding spherical nanoscale micelles of ca. 200 nm, as revealed by transmission electron microscopy and dynamic light scattering. The micelle size was mainly dependent on the hydrophilic HPMC block length. The longer the HPMC block, the larger the micelle size. The critical micelle concentration determined by fluorescence spectroscopy decreased with the increasing hydrophobic PCL block length. Curcumin was loaded in copolymer micelles as a lipophilic antitumor drug. Higher drug loading was obtained for copolymers with longer PCL blocks. The in vitro drug release profile consisted two phases with an initial burst and a subsequent slower release. Faster drug release is observed for copolymers with a shorter PCL block length and lower drug loading. HPMC–PCL copolymer micelles exhibited outstanding cytocompatibility, as evidenced by the MTT test using L929 cells. Therefore, it is concluded that biodegradable and biocompatible HPMC–PCL block copolymers present great potential as nanocarriers of lipophilic antitumor drugs.
BibTeX
@inproceedings{lu2020synthesis,
  author = {Aijing Lu and Eddy Petit and Yuandou Wang and Feng Su and Suming Li},
  title = {{Synthesis and Self-Assembly of Hydroxypropyl Methyl Cellulose-<i>block</i>-Poly(ε-caprolactone) Copolymers as Nanocarriers of Lipophilic Drugs}},
  booktitle = {ACS},
  year = {2020},
  doi = {10.1021/acsanm.0c00498},
}
Figure