Synthesis and Mechanical Properties of Polyacrylamide Gel Doped with Graphene Oxide

Haipeng Zhang, Jingjing Cao, Wenbing Jiang, Yuqi Yang, Bo-Yuan Zhu, Xiaoyu Liu, Yang Wu, Xin Sun, Ariane Felicite Bibiche Essouma Essouma, Jian Liu, Ting-Yan XingEnergies 2022 · DOI

TL;DR

This paper introduces a novel polyacrylamide (PAM) gel doped with graphene oxide (GO) and polyethyleneimine (PEI) as a cross-linker, designed for high-temperature, deep-reservoir water control. The GO acts as a multi-functional cross-linker and reinforcing agent, significantly improving the gel's thermal stability and mechanical properties, making it suitable for challenging oilfield conditions.

What Problem Does This Paper Address?

Conventional polyacrylamide gels, widely used for water control in oilfields, suffer from limitations in high-temperature and deep-reservoir environments. Their thermal stability is typically below 150°C, and their high strength can hinder injection into deep formations. This necessitates the development of gels that are not only robust at elevated temperatures but also possess a "weak gel" characteristic, allowing for easier deployment and effective water blocking. This research aims to address this by creating a gel with enhanced thermal stability and tunable mechanical properties using graphene oxide as a key additive.

Methods

The researchers synthesized PAM/PEI/GO hydrogels using a modified Hummers method for GO preparation. They systematically characterized the gels' structure and properties using a suite of analytical techniques:

  • X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), and Raman Spectroscopy: Used to analyze the structural changes and functional group interactions within the gel matrix, particularly the role of GO.
  • Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM): Employed to visualize the microstructure and morphology of the hydrogels and the distribution of GO nanosheets.
  • Differential Scanning Calorimetry (DSC): Utilized to assess the thermal stability of the gels.
  • Rheological Experiments: A HAAKE MARS600 rheometer was used to measure viscoelastic properties (storage modulus G', loss modulus G", phase angle δ), yield stress, and creep-recovery behavior.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of novel hydrogel materials.

Key Insights and Ideas

  • GO as a Multi-functional Cross-linker: GO nanosheets aren't just passive fillers; they actively participate in the cross-linking reaction between PAM and PEI, forming a more robust and interconnected 3D network.
  • Tunable Mechanical Properties: The concentration of PAM, PEI, and GO can be adjusted to fine-tune the gel's strength, stiffness, and elasticity, allowing for optimization for specific reservoir conditions.
  • Enhanced Thermal Stability: The incorporation of GO significantly boosts the thermal stability of the PAM/PEI gels, with some formulations remaining stable and undehydrated above 170°C, exceeding the requirements for many high-temperature reservoirs.
  • Weak Gel Characteristics: While GO enhances overall strength, it also contributes to a "weak gel" characteristic, which is crucial for injectivity into deep, high-pressure formations. This is linked to the formation of a controllable, porous, honeycomb-like structure.
  • GO's Role in Microstructure: At low GO concentrations, it can hinder PAM-PEI cross-linking, leading to a looser structure. However, at higher concentrations, GO agglomerates and acts as a supporting element, creating a denser network.

Key Results

  • Improved Strength and Stiffness: Increasing PAM and PEI concentrations generally led to enhanced gel strength and yield stress. An optimal PEI concentration of 0.3 wt.% was identified for maximum gel strength.
  • GO's Complex Effect on Strength: While GO generally improved thermal stability, its effect on mechanical strength was nuanced. Initially, low GO concentrations (<0.12 wt.%) could weaken the gel, but higher concentrations led to increased stiffness, though sometimes at the expense of toughness.
  • Significant Thermal Stability Increase: Gels without GO dehydrated above 187°C, while GO-doped gels showed transition points and dehydration temperatures significantly higher, with some reaching over 221°C.
  • Gelation Time Control: The addition of GO increased the gelation time, which is beneficial for production profile adjustment in deep reservoirs.
  • Microstructure Modification: SEM images revealed that GO incorporation altered the porous structure of the hydrogels, with pore size and distribution being influenced by GO concentration.

Limitations and Future Work

  • "Weak Gel" Characterization: While the paper mentions "weak gel" characteristics, a more detailed quantitative analysis of this specific property and its direct correlation with injectivity in simulated reservoir conditions would be valuable.
  • Long-term Stability in Reservoir Conditions: The study demonstrates excellent thermal stability, but long-term performance under actual reservoir conditions (e.g., high salinity, presence of crude oil, shear stress) requires further investigation.
  • GO Aggregation: The paper notes that at higher GO concentrations, aggregation can occur, leading to uneven distribution. Further research into controlling GO dispersion and preventing aggregation could optimize gel properties.
  • Optimization for Specific Reservoirs: While the study provides a framework for optimization, tailoring the PAM/PEI/GO gel composition for specific ultra-deep and high-temperature reservoir characteristics (e.g., varying temperatures, pressures, and fluid compositions) remains a key area for future work.

Summary updated

Abstract

Polyacrylamide (PAM)/polyethyleneimine (PEI) gels doped with graphene oxide (GO) were prepared. Their structure and properties were systematically studied by X-ray diffraction (XRD), Fourier transition infrared spectrum (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and rheological experiments. The results showed that the graphene oxide (GO) nanosheets were significantly involved in the cross-linking reaction between the main agent (PAM) and the cross-linker (PEI), serving as multi-functional cross-linker and effective reinforcing nanofillers. Increasing the main agent and cross-linker content, the strength of gels was enhanced effectively. The GO could effectively adjust the strength and the gelation time to exhibit characteristics of weak gel, thanks to the improved three-dimensional honeycombed structure with controllable pore size. The DSC confirmed that the PAM/PEI/GO gel exhibited excellent thermal stability and did not dehydrate above 170 °C. This work provides theoretical support for further optimization of polyacrylamide gel used in ultra-deep and high-temperature reservoirs for water control.
BibTeX
@inproceedings{zhang2022synthesis,
  author = {Haipeng Zhang and Jingjing Cao and Wenbing Jiang and Yuqi Yang and Bo-Yuan Zhu and Xiaoyu Liu and Yang Wu and Xin Sun and Ariane Felicite Bibiche Essouma Essouma and Jian Liu and Ting-Yan Xing},
  title = {{Synthesis and Mechanical Properties of Polyacrylamide Gel Doped with Graphene Oxide}},
  booktitle = {Energies},
  year = {2022},
  doi = {10.3390/en15155714},
}
Figure