Synthesis and Electronic Structure of Mid-Infrared Absorbing Cu3SbSe4 and CuxSbSe4 Nanocrystals

A. Moser, Olesya Yarema, Gregorio García, Mathieu Luisier, Filippo Longo, Emanuel Billeter, Andreas Borgschulte, Maksym Yarema, Vanessa WoodChemistry 2023 · DOI

TL;DR

This paper presents a novel synthesis route for tunable Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals, achieving precise control over their composition (x = 1.9-3.4). By combining experimental FTIR spectroscopy with theoretical DFT-parametrized tight-binding simulations, the researchers reveal how copper vacancies widen the band gap and how antisite defects can lead to mid-gap states, paving the way for new mid-infrared optoelectronic devices.

What Problem Does This Paper Address?

Mid-infrared (MIR) optoelectronic devices, such as detectors and emitters, are crucial for a wide range of applications, from thermal imaging to spectroscopy. Semiconductor nanocrystals are attractive building blocks for these devices due to their tunable optical properties. Among these, ternary I-V-VI semiconductors like famatinite Cu<sub>3</sub>SbSe<sub>4</sub> are particularly interesting because of their high absorption coefficients and narrow band gaps in the MIR range. However, a significant challenge has been the precise control over the synthesis of these nanocrystals, especially regarding their composition and the resulting electronic structure, which dictates their optical behavior. This paper aims to bridge this gap by developing a synthesis method for size-uniform Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals with tunable stoichiometry and investigating how their composition and intrinsic defects influence their electronic and optical properties.

Methods

The researchers employed a hot-injection synthesis technique to produce Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals. This method involves injecting a reactive selenium precursor into a heated mixture of copper and antimony chlorides. They systematically varied reaction parameters like temperature and time to achieve size uniformity and control the nanocrystal composition.

To understand the electronic structure, they utilized Density Functional Theory (DFT)-parametrized tight-binding simulations. This approach allows for the computationally efficient modeling of large nanocrystal structures, which would be prohibitive with pure DFT. They fitted the tight-binding parameters to bulk DFT calculations of Cu<sub>3</sub>SbSe<sub>4</sub> and then applied this model to simulated nanocrystals with varying compositions and defect types.

Experimental characterization included:

  • Transmission Electron Microscopy (TEM) and Scanning Transmission Electron Microscopy (STEM) for size, shape, and morphology analysis.
  • Energy-Dispersive X-ray Spectroscopy (EDX) for elemental composition mapping.
  • X-ray Diffraction (XRD) for structural identification.
  • Fourier Transform Infrared (FTIR) Spectroscopy to measure absorption spectra and confirm experimental trends in band gap.
  • X-ray Photoelectron Spectroscopy (XPS) to analyze the chemical states of the elements and identify potential defects.

Datasets

Not discussed in the paper. The study relies on experimental measurements and theoretical simulations rather than pre-existing datasets for training or evaluation.

Key Insights and Ideas

  • Precise Composition Control: The hot-injection synthesis method, coupled with careful parameter tuning, allows for the predictable synthesis of Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals with a tunable copper deficiency (x = 1.9-3.4). This is a significant advancement over previous methods that offered less control.
  • Copper Vacancies Dictate Band Gap: The study reveals a direct correlation between the concentration of copper vacancies and the band gap of Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals. More copper vacancies lead to a wider band gap, a trend confirmed both experimentally and theoretically. This offers a pathway to tune the absorption spectrum.
  • Antisite Defects Create Mid-Gap States: The research highlights that Sb<sub>Cu</sub> antisite defects (where an antimony atom occupies a copper site) can introduce localized states within the band gap. While these states might not be clearly visible in standard absorption spectra, they could potentially lead to sub-bandgap absorption, opening possibilities for novel device functionalities.
  • Nanocrystal Tolerance to Defects: Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals demonstrate a remarkable tolerance to copper vacancies, accommodating significantly higher concentrations (up to 20% deficiency) compared to their bulk counterparts. This is attributed to the small crystal size, which favors point defects over phase segregation.

Key Results

  • Tunable Synthesis: Achieved size-uniform Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals with compositions ranging from x = 1.9 to x = 3.4.
  • Band Gap Widening with Vacancies: The band gap of Cu<sub>x</sub>SbSe<sub>4</sub> nanocrystals increases from ~0.3 eV for stoichiometric compositions to ~0.77 eV with increased copper vacancies (x=2.5). This trend was experimentally confirmed via FTIR spectroscopy.
  • Mid-Gap State Formation: Theoretical simulations showed that Sb<sub>Cu</sub> antisite defects create mid-gap states, potentially enabling sub-bandgap absorption.
  • Experimental Validation: The theoretical predictions regarding the effect of copper vacancies on the band gap were experimentally validated using FTIR spectroscopy.

Limitations and Future Work

  • Experimental vs. Simulated Absorption Onset: A slight discrepancy (around 50 meV) was observed between the experimentally measured and theoretically simulated absorption onsets. The authors attribute this to factors like close-packing in thin films, finite size dispersion, and the absence of excitons, surface distortions, ligands, or nearest neighbors in the simulations.
  • Antisite Defect Evidence: While simulations suggest Sb<sub>Cu</sub> antisite defects create mid-gap states, direct experimental evidence from optical absorption measurements is not conclusive.
  • Future Directions: The authors suggest further investigations using techniques like electrochemical analysis or ultraviolet photoelectron spectroscopy to gain deeper insights into band onset energies. They also propose that tuning surface ligands could precisely control the conductivity of nanocrystal thin films, enabling targeted device design. The development of a robust synthesis and understanding of the electronic structure opens doors for future applications in optoelectronics and thermoelectrics.

Summary updated

Abstract

Aliovalent I-V-VI semiconductor nanocrystals are promising candidates for thermoelectric and optoelectronic applications. Famatinite Cu<sub>3</sub>SbSe<sub>4</sub> stands out due to its high absorption coefficient and narrow band gap in the mid-infrared spectral range. This paper combines experiment and theory to investigate the synthesis and electronic structure of colloidal Cu<sub><i>x</i></sub>SbSe<sub>4</sub> nanocrystals. We achieve predictive composition control of size-uniform Cu<sub><i>x</i></sub>SbSe<sub>4</sub> (<i>x</i> = 1.9-3.4) nanocrystals. Density functional theory (DFT)-parametrized tight-binding simulations on nanocrystals show that the more the Cu-vacancies, the wider the band gap of Cu<sub><i>x</i></sub>SbSe<sub>4</sub> nanocrystals, a trend which we also confirm experimentally via FTIR spectroscopy. We show that Sb<sub>Cu</sub> antisite defects can create mid-gap states, which may give rise to sub-bandgap absorption. This work provides a detailed study of Cu<sub><i>x</i></sub>SbSe<sub>4</sub> nanocrystals and highlights the potential opportunities as well as challenges for their application in infrared devices.
BibTeX
@inproceedings{moser2023synthesis,
  author = {A. Moser and Olesya Yarema and Gregorio García and Mathieu Luisier and Filippo Longo and Emanuel Billeter and Andreas Borgschulte and Maksym Yarema and Vanessa Wood},
  title = {{Synthesis and Electronic Structure of Mid-Infrared Absorbing Cu<sub>3</sub>SbSe<sub>4</sub> and Cu<sub><i>x</i></sub>SbSe<sub>4</sub> Nanocrystals}},
  booktitle = {Chemistry},
  year = {2023},
  doi = {10.1021/acs.chemmater.3c00911},
}
Figure