SV-SAW RF filters based on low-cost 128°Y LiNbO3/SiO2/poly-Si/Si substrate for 6G cmWave wireless communications

Kai Yang, Jie Chen, Juan Wang, Fuhong Lin, Jiming Fang, Meijuan Li, Junyan Zheng, Zijun Ren, Fangsheng Qian, Haiding Sun, Yansong Yang, Chengjie ZuoMicrosystems 2025 · DOI

Abstract

Recent advancements in mobile communication have escalated the demand for faster data rates, requiring higher carrier frequencies and compact, high-performance, and low-cost radio frequency (RF) filters. Micro-acoustic resonators offer significant advantages in mobile phone filtering due to their low loss and compact size. Addressing the need for low-cost filter solutions for higher frequencies, this study presents a silicon-substrate-based surface acoustic wave (SAW) technology platform to enable high-performance resonators and filters for 6G X-band (7-12 GHz) centimeter-wave (cmWave) wireless communications. Based on a silicon (Si) substrate, we propose a novel design scheme to excite shear vertical surface acoustic waves (SV-SAW) on a 128°Y LiNbO3/SiO2/poly-Si/Si layer stack and realize high-frequency resonators above 6 GHz with high-performance: electromechanical coupling coefficient (k2) of 7.6% ~ 8.9% and high-quality factor (Q) ranging from 193-679. The synthesized filters based on those high-performance resonators show low insertion loss (1.47 to 2.20 dB) and 3-dB bandwidth from 308 to 373 MHz. Especially, the demonstrated filter with a center frequency (fc) at 8.63 GHz exhibits a low insertion loss of only 1.5 dB, which is the best when compared to all other LiNbO3 acoustic filters in this frequency range, 3-dB bandwidth of 373 MHz, and decent out-of-band rejection across the entire 1-15 GHz range. These results mark a significant step forward for the microwave acoustics field and pave the way for enabling solidly-mounted, low-cost, and miniature-size SAW filters for emerging 6G cmWave wireless communications.

Introduction

As wireless networks transition from 5G to 6G, they are moving into higher frequency bands (7–15 GHz) to provide the ultra-fast data rates required for future applications. However, radio frequency (RF) filters—the "gatekeepers" that manage signal interference—face a significant challenge at these frequencies. Current solutions struggle with a "trilemma" of size, reliability, and cost. Traditional electromagnetic resonators are too bulky for mobile devices, while existing high-frequency acoustic filters often rely on fragile suspended thin films or expensive substrates like Silicon Carbide (SiC) or Sapphire.

Overview of the 5G/6G spectrum and the integration of MEMS filters in a mobile transceiver. The "Exploration" zone highlights the target FR3 band (7-20 GHz).

This research presents a breakthrough by utilizing a solidly-mounted design on a standard, low-cost Silicon substrate that delivers high performance without the manufacturing complexities of air-gapped structures.

Design and Methodology

The research team developed a multi-layer stack consisting of 128°Y LiNbO₃ / SiO₂ / poly-Si / Si. The core innovation is the excitation of Shear Vertical Surface Acoustic Waves (SV-SAW). Unlike standard Rayleigh or Shear Horizontal waves, the SV-SAW mode offers higher acoustic velocity, which is essential for reaching X-band frequencies without requiring impossibly small electrode dimensions.

Layer engineering played a crucial role in the device's performance. The SiO₂ layer serves as both an acoustic reflector to keep energy from leaking into the substrate and a temperature compensation layer. Additionally, a poly-Si layer was used to suppress parasitic surface conductance on the silicon substrate.

Simulated frequency and electromechanical coupling coefficient ($k^2$) as a function of the Lithium Niobate (LiNbO₃) layer thickness ($h_{LN}$).

Fabrication was achieved using Electron Beam Lithography (EBL) to create ultra-fine interdigital transducer (IDT) electrodes with wavelengths as small as 370 nm, using gold (Au) with a chromium (Cr) adhesive layer.

Key Insights and Results

The study revealed that in the 128°Y cut of Lithium Niobate (LiNbO₃), the SV-SAW mode is primarily driven by the $e_{15}$ piezoelectric coefficient. This leads to a high electromechanical coupling coefficient ($k^2$), which is critical for achieving the wide bandwidths required for 6G communications.

Key experimental results include:

  • High Coupling: Electromechanical coupling ($k^2$) reached 7.6% to 8.9%.
  • Record-Low Loss: The filter at 8.63 GHz achieved an insertion loss of only 1.5 dB, the best reported for LiNbO₃-based acoustic filters in this frequency range.
  • Wide Bandwidth: The team demonstrated a 3-dB bandwidth of 373 MHz.
  • Temperature Stability: The devices achieved a Temperature Coefficient of Frequency (TCF) of -46 ppm/°C, roughly half that of standard LiNbO₃ filters.

Conclusion and Future Outlook

These results demonstrate that silicon-substrate-based SAW technology is a viable, low-cost platform for 6G cmWave wireless communications. While the current prototypes utilized EBL, large-scale manufacturing can transition to commercial stepper lithography. Future work will focus on refining the filter response by suppressing spurious transverse modes using techniques like apodization and evaluating high-power durability for commercial deployment. This research marks a significant step toward enabling miniature, affordable, and high-performance RF components for the 6G era.

Summary updated

Abstract

Recent advancements in mobile communication have escalated the demand for faster data rates, requiring higher carrier frequencies and compact, high-performance, and low-cost radio frequency (RF) filters. Micro-acoustic resonators offer significant advantages in mobile phone filtering due to their low loss and compact size. Addressing the need for low-cost filter solutions for higher frequencies, this study presents a silicon-substrate-based surface acoustic wave (SAW) technology platform to enable high-performance resonators and filters for 6G X-band (7-12 GHz) centimeter-wave (cmWave) wireless communications. Based on a silicon (Si) substrate, we propose a novel design scheme to excite shear vertical surface acoustic waves (SV-SAW) on a 128°Y LiNbO<sub>3</sub>/SiO<sub>2</sub>/poly-Si/Si layer stack and realize high-frequency resonators above 6 GHz with high-performance: electromechanical coupling coefficient (k<sup>2</sup>) of 7.6% ~ 8.9% and high-quality factor (Q) ranging from 193-679. The synthesized filters based on those high-performance resonators show low insertion loss (1.47 to 2.20 dB) and 3-dB bandwidth from 308 to 373 MHz. Especially, the demonstrated filter with a center frequency (f<sub>c</sub>) at 8.63 GHz exhibits a low insertion loss of only 1.5 dB, which is the best when compared to all other LiNbO<sub>3</sub> acoustic filters in this frequency range, 3-dB bandwidth of 373 MHz, and decent out-of-band rejection across the entire 1-15 GHz range. These results mark a significant step forward for the microwave acoustics field and pave the way for enabling solidly-mounted, low-cost, and miniature-size SAW filters for emerging 6G cmWave wireless communications.
BibTeX
@inproceedings{yang2025sv,
  author = {Kai Yang and Jie Chen and Juan Wang and Fuhong Lin and Jiming Fang and Meijuan Li and Junyan Zheng and Zijun Ren and Fangsheng Qian and Haiding Sun and Yansong Yang and Chengjie Zuo},
  title = {{SV-SAW RF filters based on low-cost 128°Y LiNbO3/SiO2/poly-Si/Si substrate for 6G cmWave wireless communications}},
  booktitle = {Microsystems},
  year = {2025},
  doi = {10.1038/s41378-025-00949-9},
}
Figure