Sustainable Environmental Monitoring via Energy and Information Efficient Multinode Placement

Sabtain Ahmad, Halit Uyanik, Tolga Ovatman, Mehmet Tahir Sandikkaya, Vincenzo De Maio, Ivona Brandic, Atakan AralIEEE Internet of Things Journal 2023 · DOI

Introduction

Smart Environment Monitoring (SEM) is essential for tracking ecological health, yet deploying these networks in remote or industrial areas presents a significant "trilemma": balancing information quality, communication reliability, and energy sustainability. Most existing research treats sensor placement and gateway configuration as independent problems. However, these factors are deeply interdependent; sensor locations dictate gateway requirements, and both choices fundamentally impact the network's total energy consumption and longevity.

The GENS framework addresses this by optimizing the placement of both sensors and gateways in large-scale environmental monitoring networks. By integrating data-driven sensor selection with energy-aware gateway optimization, the framework achieves significant reductions in hardware requirements while maintaining high-fidelity data reconstruction.

The GENS Framework

The GENS framework consists of four integrated modules designed to handle the complexities of large-scale deployments in continuous geographical space.

The GENS framework architecture, illustrating the interplay between sensor placement, network modeling, and energy optimization modules.
  1. Sensor Placement (MSPQR): Utilizing column-pivoted QR decomposition, this module treats sensor placement as a signal reconstruction problem. It identifies optimal "pivot" locations that capture the maximum variance of the environmental signal, allowing for accurate state estimation from a minimal subset of nodes.
  2. Gateway Placement: This module employs a clustering algorithm to identify potential gateway locations based on the signal range of the sensors. It prioritizes coverage for high-scoring sensors identified by the MSPQR module.
  3. Network Modeling: Using the ns-3 simulator, the framework models LoRaWAN communication to evaluate packet success rates and communication costs, ensuring the physical placement is viable for long-range data transmission.
  4. Energy Optimization: A Genetic Algorithm (GA) fine-tunes the deployment by exploring various gateway configurations to minimize total network energy consumption, including both transmission and idle states.

Case Study: Ergene River Monitoring

The framework was validated using a real-world case study of the Ergene River in Turkey, a 420 km stretch of a heavily industrialized basin. The dataset included samples from 75 manual locations tracking 222 chemical substances and 131 unique micropollutants across four seasons. Unlike grid-based models, GENS operates in continuous space, reflecting the realistic constraints of river monitoring where a few meters can significantly impact signal propagation and data relevance.

Results and Discussion

The GENS framework demonstrated substantial efficiency gains across all metrics. The number of required sensors was reduced by 60% (from 75 to 30), and gateways were reduced by 33% (from 15 to 10). Despite these reductions, the system maintained high information fidelity, successfully detecting 121 out of 131 unique micropollutants.

Mean Squared Error (MSE) of signal reconstruction as a function of the number of sensors, comparing different selection methods.

As shown in the performance analysis, the framework effectively manages the trade-off between sensor count and reconstruction error. A key insight from the study is the power of "tailored bases." By learning from local data, the MSPQR method captures specific spatial nuances of the Ergene River that generic statistical models often miss. Furthermore, the paper demonstrates that optimizing gateways after selecting optimal sensor locations leads to sub-optimal energy use. The multi-stage optimization in GENS allows the gateway placement to "react" to the information-critical sensor locations, resulting in an energy efficiency improvement of approximately 10% compared to standard deployments.

Conclusion

The GENS framework provides a robust solution for sustainable environmental monitoring by co-optimizing information and energy efficiency. Future work will focus on adapting the model to dynamic environmental changes, such as seasonal foliage density, and scaling the genetic algorithm for deployments involving thousands of nodes. Real-time adaptation of sampling frequencies based on detected pollution spikes remains a promising avenue for further enhancing network responsiveness.

Summary updated

BibTeX
@article{ahmad2023sustainable,
  author = {Sabtain Ahmad and Halit Uyanik and Tolga Ovatman and Mehmet Tahir Sandikkaya and Vincenzo De Maio and Ivona Brandic and Atakan Aral},
  title = {{Sustainable Environmental Monitoring via Energy and Information Efficient Multinode Placement}},
  journal = {IEEE Internet of Things Journal},
  year = {2023},
  doi = {10.1109/jiot.2023.3303124},
}
Figure