Surface Wetting Study via Pseudocontinuum Modeling

Meysam Makaremi, Myung S. Jhon, Meagan S. Mauter, Lorenz T. BieglerThe Journal of Physical Chemistry C 2016 · DOI · arXiv

Abstract

An accurate estimation of contact angle and surface wettability for various degrees of hydrophobicity becomes increasingly important in the molecular design of solid surfaces. In this study, we develop a simple, yet physically realistic, model for estimating contact angle via hybridizing molecular dynamics and pseudocontinuum theory. Molecular dynamics simulations were carried out to compute the macroscale contact angle between a water droplet and smooth walls from the nanoscale calculations. A macrolevel droplet including numerous degrees of freedom due to a large number of molecules cannot be directly studied using atomistic simulations. To resolve this issue, we employed two approaches consisting of the pseudocontinuum approximation and the modified Young–Laplace equation. The former involves the 9–3 Lennard-Jones potential and can drastically reduce the degrees of freedom in molecular simulations, while the latter relates the mesoscale contact angle to the realistic one. We altered different parameters, including the liquid–surface potential characteristics and the temperature, and calculated the water contact angle by leveraging the mass density profile fitting method to predict a broad spectrum of hydrophobic and hydrophilic substrates. This study suggests that pseudocontinuum modeling is an accurate approach to probe surface wettability for various processes at a low computational cost.

Introduction

Understanding the interaction between water and solid surfaces—characterized by wettability—is fundamental to the design of advanced materials, ranging from water purification membranes to self-cleaning coatings. The primary metric for wettability is the contact angle ($\theta$), the angle formed where a liquid droplet meets a solid surface. While experimental measurement is standard, predicting these angles from first principles presents a significant multiscale challenge. Macroscopic droplets contain trillions of molecules, exceeding the capacity of atomistic simulations. Conversely, nanoscale Molecular Dynamics (MD) simulations are influenced by line tension effects that cause nanodroplets to behave differently than their macroscopic counterparts. This research bridges these scales using a hybrid pseudocontinuum approach.

Methodology

To overcome computational limitations, the study employs two primary strategies to simplify the physics without sacrificing accuracy:

Pseudocontinuum Approximation

Traditional MD simulations model every individual atom in a solid substrate, which is computationally intensive. The pseudocontinuum model simplifies this by treating the wall as a continuous mass. By integrating the standard 12-6 Lennard-Jones (LJ) potential over a semi-infinite volume, the researchers derived a 9-3 LJ potential. This allows the entire surface-liquid interaction to be represented by a single mathematical term, drastically reducing the degrees of freedom in the simulation.

Transition from an atomistic wall (A) to a simplified pseudocontinuum representation (B).

Scale Bridging

The modified Young-Laplace equation was utilized to extrapolate macroscopic contact angles from nanoscale data. By simulating droplets of varying sizes (800 to 6,400 water molecules) using the rigid SPC/E water model in LAMMPS, the researchers could account for line tension and determine the "infinite-size" contact angle.

Results and Discussion

The model was validated against experimental data for a variety of materials, including graphite, silicon, and several metals (Al, Ag, Au, Ni, Pt).

Molecular dynamics snapshots showing the geometric fitting of contact angle $\theta$ for hydrophobic (A) and hydrophilic (B) regimes.

Key Findings

  • Accuracy and Convergence: The pseudocontinuum approximation reaches over 98% accuracy when the simulated wall thickness exceeds just $2\sigma$ (twice the molecular diameter). This confirms that massive simulated slabs are not required for realistic results.
  • Wetting Regimes: The study identified two distinct regimes: a "fast regime" ($\theta > 14^\circ$) where contact angle is highly sensitive to surface energy, and a "slow regime" ($\theta < 14^\circ$) where it remains relatively stable.
  • Temperature Effects: Between 300 K and 360 K, the contact angle remained largely independent of temperature, indicating that surface energy dominates thermal fluctuations in this range.
  • Experimental Alignment: Results for graphite and metals showed substantial agreement with literature. A minor discrepancy in silicon ($7^\circ$) was attributed to the presence of native oxide layers in experimental samples, which the pure-silicon simulation did not include.

Conclusion

The hybrid MD-pseudocontinuum approach provides a computationally efficient and accurate method for predicting surface wettability. By reducing the complexity of the solid-liquid interface, the model enables the rapid screening of materials for hydrophobic or hydrophilic applications. Future work will focus on incorporating surface roughness and chemical reactivity to further refine the model's predictive power for real-world, non-ideal surfaces.

Summary updated

Abstract

An accurate estimation of contact angle and surface wettability for various degrees of hydrophobicity becomes increasingly important in the molecular design of solid surfaces. In this study, we develop a simple, yet physically realistic, model for estimating contact angle via hybridizing molecular dynamics and pseudocontinuum theory. Molecular dynamics simulations were carried out to compute the macroscale contact angle between a water droplet and smooth walls from the nanoscale calculations. A macrolevel droplet including numerous degrees of freedom due to a large number of molecules cannot be directly studied using atomistic simulations. To resolve this issue, we employed two approaches consisting of the pseudocontinuum approximation and the modified Young–Laplace equation. The former involves the 9–3 Lennard-Jones potential and can drastically reduce the degrees of freedom in molecular simulations, while the latter relates the mesoscale contact angle to the realistic one. We altered different parameters, including the liquid–surface potential characteristics and the temperature, and calculated the water contact angle by leveraging the mass density profile fitting method to predict a broad spectrum of hydrophobic and hydrophilic substrates. The computational results were compared with experimental data for various materials, including graphite, silicon, and metals. This study suggests that pseudocontinuum modeling is an accurate approach to probe surface wettability for various processes at a low computational cost.
BibTeX
@article{makaremi2016surface,
  author = {Meysam Makaremi and Myung S. Jhon and Meagan S. Mauter and Lorenz T. Biegler},
  title = {{Surface Wetting Study via Pseudocontinuum Modeling}},
  journal = {The Journal of Physical Chemistry C},
  year = {2016},
  doi = {10.1021/acs.jpcc.6b02142},
}
Figure