Suppression of Back-Reflection From the End Face of Si3N4 Waveguide Resonator

Changkun Feng, Danni Liu, Peiren Ni, Hui Li, Lishuang FengIEEE Access 2021 · DOI

Abstract

Silicon nitride waveguide (Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> ), is used as the most important sensitive device because of its excellent high-polarizing characteristics. It has the potential to build the miniaturized, high-precision resonant integrated optical gyroscope (RIOG) in recent years. However, the back-reflection caused by the refractive index difference between the Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> waveguide and the pigtail fiber has a non-negligible impact on the accuracy of the gyroscope. In this paper, we propose a method to suppress the back-reflection of the end face of the Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> waveguide resonator. We use the Fimmprop module of the simulation software Photon Design to simulate the relationship between the back-reflection coefficient of Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> waveguide and different tilt angles. The simulation result shows that when the end face of the Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> waveguide is oblique cut by 15°, the back-reflection is the minimum, about -67 dB. The back-reflection obtained through the experiments are about -65 dB, consistent with the simulation result. Together, our data suggested that the back-reflection noise of the Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> can be suppressed by the oblique cutting of the end face by 15°. The conclusion can lay a foundation for improving the performance of RIOG based on Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> waveguide resonator.
BibTeX
@inproceedings{feng2021suppression,
  author = {Changkun Feng and Danni Liu and Peiren Ni and Hui Li and Lishuang Feng},
  title = {{Suppression of Back-Reflection From the End Face of Si<sub>3</sub>N<sub>4</sub> Waveguide Resonator}},
  booktitle = {IEEE Access},
  year = {2021},
  doi = {10.1109/access.2021.3059746},
}

Loading related content...

Figure