Super-Threshold Adiabatic FinFET Circuits Based on PAL-2N Operating in Medium Strong Inversion Regions

Jianping Hu, Cheng-Hao Han, Yuejie Zhang, Beibei Qi, Haiyan NiThe Open Electrical & Electronic Engineering Journal 2014 · DOI

Abstract

Lowering supply voltage of FinFET circuits is an effective way to achieve low power dissipations. In this paper, the super-threshold adiabatic FinFET circuits based on PAL-2N operating on medium strong inversion regions are addressed in terms of energy consumption and operating frequency. The supply voltage of the super-threshold circuits is much larger than the threshold voltage of the transistors, but it is lower than the normal standard supply voltage. The performance of a mode-10 FinFET PAL-2N counter is investigated with different source voltages ranging from 0.2V to 1.0V. All circuits are simulated with HSPICE at a PTM (Predictive Technology Model) 32nm FinFET technology. The simulation results show that the adiabatic FinFET circuits based on PAL-2N achieve the minimum EDP in the supply voltages of about 700mV - 800mV, the devices of which operate in medium strong inversion regions. The super-threshold adiabatic FinFET logic circuits can attain low energy consumption with favorable performance, since FinFET devices can provide better drive strength than bulk CMOS ones.
BibTeX
@article{hu2014super,
  author = {Jianping Hu and Cheng-Hao Han and Yuejie Zhang and Beibei Qi and Haiyan Ni},
  title = {{Super-Threshold Adiabatic FinFET Circuits Based on PAL-2N Operating in Medium Strong Inversion Regions}},
  journal = {The Open Electrical \& Electronic Engineering Journal},
  year = {2014},
  doi = {10.2174/1874129001408010263},
}

Loading related content...

Figure