TL;DR
This paper introduces a novel approach to evaluating urban construction land suitability by integrating "vertical" (potential and resistance) and "horizontal" (urban sprawl) processes. By combining the Potential-Resistance (PR) model with the Minimum Cumulative Resistance (MCR) model, the study provides a more comprehensive and spatially explicit assessment, offering better guidance for sustainable urban development planning.
What Problem Does This Paper Address?
Urbanization, while driving economic development, often leads to the loss of valuable agricultural and ecological lands. Traditional land suitability evaluations, primarily relying on map overlays (vertical processes), often oversimplify complex interactions and neglect the dynamic nature of urban expansion (horizontal processes). This can result in poorly planned development, leading to inefficient land use, ecological damage, and the creation of "ghost cities." The paper addresses the need for a more holistic approach that accounts for both the inherent characteristics of land and the spatial dynamics of urban growth to ensure sustainable development.
Methods
The study employs a two-stage approach:
- Vertical Processes (Potential-Resistance Model):
- Urban Development Potential (P): Assessed using factors like distance to built-up areas (D_B), distance to main roads (D_M), and current land use (LU). These factors are assigned scores and weighted using the Analytic Hierarchy Process (AHP) method, incorporating expert opinions via the Delphi method.
- Ecological Constraint Resistance (ES): Evaluated based on seven factors including topography, distance to major rivers (D_MR), covered coal resources (CR), coal mining subsidence areas (CM), water source protection areas (WP), cultural sites (CS), and basic farmland (BF). Factors with absolute restrictions (e.g., core water source protection areas) are assigned a very high resistance score (9999).
- Suitability (S): Calculated as the difference between potential and resistance ($S_i = P_i - ES_i$). Positive values indicate suitability, while negative values suggest areas for ecological preservation.
- Horizontal Processes (Minimum Cumulative Resistance Model):
- The suitability values ($S_i$) from the vertical analysis are used to derive a resistance surface for horizontal processes. Higher suitability ($P_i$) corresponds to lower resistance, and vice versa.
- The Minimum Cumulative Resistance (MCR) model is then applied to simulate urban spatial expansion. Current urban construction lands are treated as "sources," and the model calculates the cumulative resistance from these sources to any point in space.
- The MCR model is adapted to incorporate the derived resistance values from the vertical analysis.
Finally, the study regionalizes the study area into four categories: priority, suitable, restricted, and prohibited areas, based on resistance thresholds derived from the MCR model.
Datasets
The study utilizes the following datasets for the Beihu New District of Jining City, China:
- 2013 land use map
- Land-use status survey data from 2013
- 1:10,000 topographic map
- Thematic maps including:
- Basic farmland protection zones
- Water source protection areas
- Coal mining subsidence areas
- Areas with covered coal resources
All data were processed and projected using ArcGIS 10.3.
Key Insights and Ideas
- Integration is Key: The core innovation is the seamless integration of vertical (inherent land characteristics) and horizontal (urban expansion dynamics) processes. This moves beyond traditional static suitability assessments.
- "Vertical" vs. "Horizontal" as Metaphors: The paper uses "vertical" to describe map overlay techniques and "horizontal" to describe spatial processes like movement and spread, which is a useful conceptual framing.
- MCR as a Dynamic Simulator: The MCR model, adapted here, proves effective in simulating urban sprawl, providing a more realistic prediction of future development patterns than static methods.
- Ecological Veto Power: Explicitly assigning extremely high resistance values to critical ecological areas (e.g., water source protection, basic farmland) ensures they are effectively protected from development.
- Beyond Suitability: Guiding Development: The final regionalization provides actionable insights for planners, identifying not just where development can occur, but where it is prioritized and where it should be restricted or prohibited.
Key Results
The study area was classified into four categories:
- Priority Areas: 158.75 km² (16.55%) - Located around existing built-up zones, benefiting from infrastructure and driving outward growth.
- Suitable Areas: 151.62 km² (15.81%) - Buffer zones between restricted and priority areas, offering flexibility for expansion.
- Restricted Areas: 123.57 km² (12.89%) - Serve as ecological protection buffers and isolation belts.
- Prohibited Areas: 524.94 km² (54.75%) - Critical for ecosystem services (flood regulation, water conservation, biodiversity) and represent barriers to future expansion.
The results highlight that a significant portion of the study area is either restricted or prohibited for construction, emphasizing the importance of ecological preservation. The priority and suitable areas are concentrated around urban centers, indicating potential for future development.
Limitations and Future Work
- Subjectivity in AHP: The authors acknowledge that the AHP method, while robust, can introduce some subjectivity in factor weighting. They mitigated this by consulting experts from various administrations.
- Data Scale Limitations: The maximum scale of the topographic map available was 1:10,000, which is considered secret-related. A larger scale map could improve the accuracy of topographic factor classification.
- Omission of Political Factors: The study did not explicitly include political factors, which can influence land-use policies and implementation. Future research could explore incorporating these.
- Future Directions:
- Exploring other weighting methods for evaluation factors.
- Investigating the spatial influence of political factors.
- Improving data accuracy with higher-resolution topographic data.
- Developing multi-scene urban spatial expansion simulations and land-use layout optimization.
- Integrating urban land-use change prediction models with rational scenario design.
Summary updated