Abstract
Oxidative dehydrogenation of propane is a promising technology for the preparation of propene. Boron-based nonmetal catalysts exhibit remarkable selectivity toward propene and limit the generation of CO<sub>x</sub> byproducts due to unique radical-mediated C-H activation. However, due to the high barrier of O-H bond cleavage in the presence of O<sub>2</sub>, the radical initialization of the B-based materials requires a high temperature to proceed, which decreases the thermodynamic advantages of the oxidative dehydrogenation reaction. Here, we report that the boron oxide overlayer formed in situ over metallic Ni nanoparticles exhibits extraordinarily low-temperature activity and selectivity for the ODHP reaction. With the assistance of subsurface Ni, the surface specific activity of the BO<sub>x</sub> overlayer reaches 93 times higher than that of bare boron nitride. A mechanistic study reveals that the strong affinity of the subsurface Ni to the oxygen atoms reduces the barrier of radical initiation and thereby balances the rates of the BO-H cleavage and the regeneration of boron hydroxyl groups, accounting for the excellent low-temperature performance of Ni@BO<sub>x</sub>/BN catalysts.
Introduction
Propene is a vital building block for plastics and chemicals, often produced via the oxidative dehydrogenation of propane (ODHP). While ODHP is theoretically energy-efficient because it is exothermic, it suffers from a major practical hurdle: selectivity. Boron-based catalysts are excellent at producing propene without over-oxidizing it into useless CO<sub>2</sub>, thanks to a unique radical-mediated mechanism. However, these catalysts are typically "sluggish" at low temperatures, requiring heat exceeding 500°C to break the O-H bonds necessary to start the radical chain reaction. This study introduces a "core-shell" catalyst design that significantly lowers the operating temperature for ODHP, enabling efficient production at temperatures as low as 440°C.
Catalyst Synthesis and Characterization
The research team synthesized a hybrid material consisting of nickel nanoparticles supported on hexagonal boron nitride (h-BN). Through a process called "reactive metal-support interaction," they treated the Ni/h-BN with CO<sub>2</sub> at 800°C. This caused a thin (0.5–2 nm) amorphous boron oxide (BO<sub>x</sub>) shell to form over the metallic Ni cores.
The team employed high-resolution TEM and EELS mapping to confirm the core-shell structure. To understand the chemistry in real-time, they used DRIFTS (Diffuse Reflectance Infrared Fourier Transform Spectroscopy) to monitor the stretching of B-OH bonds during the reaction. Additionally, Density Functional Theory (DFT) calculations were used to simulate the electronic interaction between the subsurface nickel and the surface oxide layer.
Performance and Mechanistic Insights
The Ni@BO<sub>x</sub>/BN catalyst demonstrated a 93-fold increase in surface-specific activity compared to traditional boron nitride. The catalyst achieved >25% propane conversion at 440°C, nearly double the performance of other boron-based counterparts at that temperature. Despite the high activity, the catalyst maintained ~80% selectivity toward total olefins, with CO<sub>2</sub> production kept below 3%.
The most critical insight is the "subsurface promotion" effect. The subsurface Ni has a strong affinity for oxygen, which electronically "tugs" on the BO<sub>x</sub> shell. This interaction elongates the B-O bonds and weakens the O-H bonds of the surface hydroxyl groups. In standard boron catalysts, the energy barrier for O<sub>2</sub>-assisted O-H cleavage is high (>2.0 eV), but with subsurface Ni assistance, this barrier plummets to just 0.26 eV. This allows the catalyst to generate necessary active radicals much faster and at lower temperatures. Furthermore, the BO<sub>x</sub> shell acts as protective armor, preventing the metallic Ni core from oxidizing or causing unwanted side reactions.
Conclusion
The subsurface promotion concept offers a robust solution to the high-temperature limitations of boron-based catalysts. In a 50-hour stability test at 440°C, the conversion only dropped slightly (from 23.4% to 22.1%), demonstrating superior durability. While the 800°C synthesis step remains an energy-intensive requirement, the ability to operate at lower temperatures significantly improves the thermodynamic profile of ODHP. Future research may extend this concept to other metal/non-metal combinations to further optimize performance for various hydrocarbon substrates.
Summary updated