Abstract: The first stage of LHAASO-KM2A has been completed in Sichuan, China. KM2A is composed of electromagnetic particle detectors (ED) and muon detectors (MD), focusing on gamma ray astronomy above 30 TeV and cosmic ray physics in the “knee” region. The ED array in the first stage is installed into two clusters and the distance between the two clusters is around 230 meters. The MDs are distributed in one of the clusters. Each MD is covered with soil of 2.5 meters thick. We analyzed the lateral distribution of muons which are 140-300 meters away from Shower axis, and the primary cosmic ray energy is about 100TeV.
TL;DR
Researchers from the LHAASO Collaboration have successfully measured the lateral distribution of muons in cosmic ray showers using the first stage of the KM2A detector array. By leveraging a unique "split" detector geometry, they validated their simulation models for 100 TeV cosmic rays at distances of 140–300 meters from the shower core, where interference from other particles is minimal.
What Problem Does This Paper Address?
When high-energy cosmic rays or gamma rays hit Earth's atmosphere, they trigger a cascade of secondary particles known as an Extensive Air Shower (EAS). To understand the "primary" particle—its energy, mass, and origin—scientists must measure the density and spread of these secondary particles on the ground.
Muons are particularly valuable because they carry information about the primary particle's mass and help distinguish between common cosmic rays (hadrons) and rare, high-energy gamma rays. However, measuring muons accurately is difficult. Near the center (core) of a shower, high-energy electromagnetic particles can "punch through" shielding and be mistaken for muons. This paper addresses the challenge of obtaining clean muon measurements by looking further away from the shower core using the early-stage infrastructure of a massive new observatory.
Methods
The study utilizes the first stage of LHAASO-KM2A (Large High Altitude Air Shower Observatory - 1 $km^2$ array) in Sichuan, China.
- The Hardware: The setup consisted of 71 Electromagnetic Detectors (EDs) to reconstruct the shower's direction and core position, and 10 Muon Detectors (MDs). The MDs are water Cherenkov detectors buried under 2.5 meters of soil to filter out low-energy electromagnetic noise.
- The Geometry: The EDs were split into two clusters (North and South) separated by about 230 meters. The researchers specifically selected events where the shower core landed in the North cluster while the muons were measured by the MDs in the South cluster.
- Simulation: The team used the CORSIKA package with QGSJET2 and GHEISHA hadronic interaction models to generate Monte Carlo (MC) simulations. This allowed them to compare real-world data against theoretical expectations for various primary particles (from Hydrogen to Iron).
Datasets
- Experimental Data: Collected over six months (December 2018 to May 2019) during the stable operation of the KM2A's first stage.
- Simulation Data: MC sets covering an energy range from 0.1 TeV to 10 PeV, weighted to match standard cosmic ray component models (EPOS and Fluka).
Key Insights and Ideas
- Exploiting Distance: By focusing on muons 140–300 meters away from the shower axis, the team effectively bypassed the "punch-through" effect. At these distances, the electromagnetic component of the shower has decayed enough that it doesn't interfere with the muon count.
- Temporal Discrimination: The researchers used a strict "time residual" cut (selecting particles arriving within -20ns to 40ns of the expected shower front). This reduced background noise to a negligible 0.002 Hz per detector, ensuring the signals were actually from the air shower.
- Model Validation: The high degree of agreement between the experimental data and the Monte Carlo simulations confirms that the KM2A's reconstruction algorithms and the underlying hadronic interaction models are highly accurate at the 100 TeV energy scale.
Key Results
- Core Resolution: The experiment achieved a shower core position resolution of 5.5 meters.
- Energy Focus: After applying data selection criteria, the primary cosmic ray energy was found to be distributed mainly around 100 TeV.
- Muon Density: The study successfully mapped the muon density as a function of distance from the core. The resulting distribution shows a clear, predictable decrease in density as distance increases, matching the simulation results almost perfectly.
- Gamma-Hadron Discrimination: The results demonstrate that the MD array can effectively distinguish between primary hadrons and gammas, a cornerstone requirement for the observatory’s future gamma-ray astronomy goals.
Limitations and Future Work
The primary limitation of this study is its scale; it utilized only about 2% of the final planned KM2A array. Consequently, the analysis was restricted to a relatively narrow energy band (~100 TeV) and a specific distance range.
However, the authors note that a quarter of the full MD array has already been successfully deployed since this data was taken. Future work will involve a much more detailed analysis of muon lateral distribution across a wider range of energies and distances as LHAASO reaches its full operational capacity.
Summary updated