Study on the Cell Magnification Equivalent Method in Out-of-Plane Compression Simulations of Aluminum Honeycomb

Yuning Qiao, Yong Peng, Ping Cheng, Xuefei Zhou, Fang Wang, Fan Li, Kui Wang, Chao Yu, Honggang WangSustainability 2023 · DOI

TL;DR

This paper tackles the computational cost of simulating large, dense aluminum honeycomb structures by developing and validating a "cell magnification equivalent method." They found that by carefully selecting magnification factors based on the thickness-to-length ratio and using correlation analysis, they can accurately predict the mechanical behavior of these structures while significantly reducing simulation time.

What Problem Does This Paper Address?

Simulating the behavior of aluminum honeycombs, especially those with many small, dense cells, is computationally expensive. This is a significant hurdle for engineers working in fields like automotive, aviation, and rail transit, where these structures are crucial for their high rigidity, strength, and energy absorption capabilities. Traditional finite element models struggle with the sheer number of elements required. While "cell magnification" (enlarging the cells in the model) is a known technique to speed up simulations, it often leads to inaccuracies because the mechanical properties and failure modes don't always scale predictably. The key challenge this paper addresses is how to perform cell magnification effectively, ensuring that the magnified model accurately represents the original structure's out-of-plane compression behavior and how to determine the optimal magnification factor.

Methods

The researchers employed a multi-pronged approach:

  • Finite Element Modeling (FEM): They used LS-DYNA, a powerful explicit finite element code, to create detailed models of honeycomb structures. They specifically used shell elements to capture the complex deformation of cell walls.
  • Cell Magnification Equivalence: The core of their method is based on the theoretical finding that honeycomb structures with the same thickness-to-length ratio (µ) exhibit similar mechanical properties. They established equivalent models by scaling up the cell sizes while maintaining this µ ratio.
  • Experimental Validation: To confirm their simulation results, they conducted drop-weight impact tests on physical honeycomb specimens. They compared the force-compression displacement curves and energy absorption characteristics from both simulations and experiments.
  • Correlation Analysis (CORA): To objectively determine the "optimal" cell magnification times, they used the CORA rating method. This statistical technique quantifies the similarity between two curves (in this case, the force-compression displacement curves of the original and magnified models), providing a score from 0 to 100%.
  • Predictive Function Development: Finally, they analyzed the relationship between cell wall length and the determined optimal magnification times to derive a predictive function (a first-order decay exponential function, ExpDec1) that can estimate the optimal magnification factor for new honeycomb designs.

Datasets

The paper utilizes two primary sources of data:

  • Simulated Honeycomb Structures: They created numerous finite element models of aluminum honeycombs with varying cell wall lengths (from 4 mm to 24 mm) and corresponding cell wall thicknesses to maintain a constant thickness-to-length ratio (µ = 0.005).
  • Experimental Honeycomb Specimens: They fabricated and tested physical honeycomb specimens with specific dimensions (100x100x100 mm and 150x150x100 mm) and cell wall lengths (6 mm and 10 mm) to validate their simulation models and the derived magnification factors.

Key Insights and Ideas

  • Thickness-to-Length Ratio is Key: The paper strongly reinforces that the thickness-to-length ratio (µ) is the critical parameter for achieving equivalent mechanical properties in cell-magnified honeycomb models. This provides a theoretical foundation for their approach.
  • Magnification Isn't Always Equivalent: A crucial finding is that simply scaling up cells doesn't guarantee equivalent behavior. The CORA analysis revealed that the mechanical performance of honeycombs can differ significantly before and after magnification if the magnification factor isn't carefully chosen.
  • CORA as an Objective Metric: Using CORA provides a quantitative and objective way to assess the accuracy of cell magnification, moving beyond qualitative comparisons. This is vital for establishing reliable equivalent models.
  • Predictive Power for Design: The development of the ExpDec1 function is a significant practical outcome. It allows engineers to quickly estimate the optimal magnification factor for a given cell wall length, streamlining the simulation setup process for new designs.

Key Results

  • Reduced Simulation Time: The cell magnification method significantly reduced computation time. For example, a honeycomb with a 24 mm cell wall length saw its calculation time reduced by 26.39 times compared to the original.
  • High Correlation Achieved: Through CORA analysis and experimental validation, they demonstrated that optimal cell magnification times could achieve correlation ratings above 90% for force-compression displacement curves, indicating excellent agreement.
  • Accurate Prediction Function: The derived ExpDec1 function (y = 1.48 + 37.64/exp(x/1.85)) showed a high goodness of fit (R² = 0.96), indicating its reliability in predicting optimal magnification times based on cell wall length.
  • Experimental Validation: Drop-weight impact tests confirmed that a magnification factor of 1.67 times for a 6 mm cell wall length honeycomb accurately represented the behavior of a 10 mm cell wall length honeycomb, with errors in plateau force and energy absorption within 5%.

Limitations and Future Work

  • Bearing Area Consideration: The paper notes that a potential source of error in traditional equivalent methods is the change in bearing area after cell expansion. While they adjusted for this, it highlights a nuance in achieving perfect equivalence.
  • Infinite Expansion Not Possible: The study acknowledges that cell magnification cannot be infinitely expanded, as the magnification times tend towards 1 with increasing cell wall lengths.
  • Focus on Out-of-Plane Compression: The current study specifically focuses on out-of-plane compression. Future work could explore the applicability of this method to other loading conditions (e.g., in-plane compression, shear).
  • Material Specificity: The study uses aluminum honeycombs. Further research could investigate if the derived relationships and predictive functions hold for other materials.
  • Broader Application: While the predictive function is a great step, further validation across a wider range of honeycomb geometries and applications would be beneficial.

Summary updated

Abstract

The large scale and long calculation times are unavoidable problems in modeling honeycomb structures with large sizes and dense cells. The cell magnification equivalent is the main method to solve those problems. This study finds that honeycomb structures with the same thickness-to-length ratios have the same mechanical properties and energy absorption characteristics. The improved equivalent finite element models of honeycomb structures with the same thickness-to-length ratios were established and validated by experiments. Based on the validated finite element model of the equivalent honeycomb structures, the out-of-plane compression behaviors of honeycomb structures were analyzed by LS-DYNA software. The results show that the performance of honeycomb structures is not equivalent before and after cell magnification. Thus, the cell magnification results were further subjected to CORA (correlation analysis) to determine the magnification time and prove the accuracy of the cell magnification time through drop-weight impact tests. In addition, a first-order decay exponential function (ExpDec1) for predicting cell magnification time was obtained by analyzing the relationship between the cell wall length and the cell magnification time.
BibTeX
@inproceedings{qiao2023study,
  author = {Yuning Qiao and Yong Peng and Ping Cheng and Xuefei Zhou and Fang Wang and Fan Li and Kui Wang and Chao Yu and Honggang Wang},
  title = {{Study on the Cell Magnification Equivalent Method in Out-of-Plane Compression Simulations of Aluminum Honeycomb}},
  booktitle = {Sustainability},
  year = {2023},
  doi = {10.3390/su15031882},
}
Figure