Study on Properties of Hydrophobically Associating Polymer in High Salinity Reservoirs

Kai Wang, Caili Dai, Wangwang Zhang, Hailong Chen, Hui Li, Lei Wang, Xiao-Ming WuAsian 2014 · DOI

Abstract

Compared with conventional partially hydrolyzed polyacrylamide (HPAM), hydrophobically associating polymers (HAPs) demonstrate superior performance in high-salinity reservoirs. This study investigates viscosity variations under different influencing factors, including concentration, salinity, and temperature. Experimental results identify the optimum operating window as a mass concentration of 2500–4000 mg/L, salinity of 40,500–80,500 mg/L, and temperatures between 20–60 °C. Sand-packing flooding and anti-shearing tests reveal that HAPs can regain viscosity after mechanical stress and provide higher incremental oil recovery in high-salinity environments than conventional polymer flooding, indicating significant potential for tertiary oil recovery.

Introduction

In tertiary oil recovery, polymers are injected into reservoirs to increase the viscosity of the displacement fluid, thereby improving sweep efficiency. The industry standard, HPAM, often fails in harsh environments because salt ions cause molecules to coil and mechanical shearing permanently degrades molecular chains. This paper validates HAPs—polymers with small hydrophobic groups that "self-assemble" into 3D networks—as a durable solution for these challenging conditions.

Methods

The researchers conducted laboratory experiments to stress-test HAP performance:

  • Viscometry: Measured how concentration, salinity, and temperature affect fluid thickness.
  • Shear Testing: Simulated injection stress through high-speed stirring to measure viscosity recovery.
  • Sand-packing Flooding: Simulated reservoir porous structures to measure incremental oil recovery compared to standard water flooding.

Results and Discussion

Concentration and the Critical Aggregation Point

A key finding is the "Critical Aggregation Concentration" (C*) at approximately 2500 mg/L. Below this threshold, molecules act individually; above it, hydrophobic groups associate to form a massive network, causing viscosity to skyrocket. At 5000 mg/L, viscosity can reach ~14,000 mPa·s, which may present injectivity challenges despite high efficiency.

Long-term viscosity stability across different polymer concentrations.

Salinity Resilience and Molecular Healing

Unlike conventional polymers, HAPs exhibit increased viscosity with salt addition up to ~80,500 mg/L. Electrolytes reinforce the "self-thickening" association. Furthermore, HAPs demonstrate an "antishearing" property: while mechanical stress temporarily disrupts the network, the molecules self-assemble to regain viscosity within seconds once stress is removed.

Viscosity recovery over time at varying salinity levels.

Performance Limits

The technology faces specific ceilings: beyond 80,500 mg/L salinity, the polymer loses solubility, and performance declines above 80°C due to increased thermodynamic movement. However, within the 20–60°C range, the entropy-driven association remains highly stable.

Conclusion

HAPs achieved an incremental oil recovery of 13.3% over conventional water flooding in high-salinity simulations. Their ability to rebuild internal networks after shearing makes them an ideal candidate for surviving the transition from injection pumps to deep reservoir pores. Future research will focus on extending thermal stability for even deeper, hotter reservoirs.

Summary updated

Abstract

Compared with the conventional partially hydrolyzed polyacrylamide, hydrophobically associating polymer performs better in high salinity reservoirs. In this paper, the variation of viscosity is studied under condition of different influencing factors such as concentration, salinity and temperature. The results show that the optimum applicable mass concentration, salinity and temperature is 2500-4000 mg/L, 40500-80500 mg/L and 20-60 °C, respectively. Sandpacking flooding test and anti-shearing test are carried out under laboratory conditions. The results show that the hydrophobically associating polymer after being sheared also has ability to regain its viscosity and the incremental oil recovery obtained in high salinity is higher than conventional polymer flooding, which suggests that it has a wide application prospects in tertiary oil recovery.
BibTeX
@inproceedings{wang2014study,
  author = {Kai Wang and Caili Dai and Wangwang Zhang and Hailong Chen and Hui Li and Lei Wang and Xiao-Ming Wu},
  title = {{Study on Properties of Hydrophobically Associating Polymer in High Salinity Reservoirs}},
  booktitle = {Asian},
  year = {2014},
  doi = {10.14233/ajchem.2014.16733},
}
Figure