Study on Light Interference Simulation and Performance Evaluation of Low light Imaging System

Yuan Wei, Yu Wang, Zhang Fang-Fang, Ruan Jiang-Yang, Wang Xiao-Rui, Zhang Jian-Qi, Feng Zhuo-Xiang, Xie Wei-Bo, Zhang Liu Xin, Wang Jian-Qi, Wang Luo Yuan, Jin Ling-Xue, Wei-Qi, Chang Zhang Jun-Ju, Zhang Ben-Kang, Min Bao-Hui, Yuan Chao-Bo, Jiang Yi-Hui, Bin, Guo Bing-Tao, Jing Wei-Guo, Wang Xiao-Bing, Chen Yu-Jiao, Ru Zhibing, Liu Bing, Li ShuangquanJournal of Chemical Biological and Physical Sciences 2018 · DOI

Abstract

Modern battlefield environments are often illuminated by intense light sources such as flares and fires, which significantly impact the performance of low-light level (LLL) imaging systems. This study investigates the interference signal response mechanisms of LLL equipment, focusing on optical gain characteristics and quantitative analysis of interference sources. By simulating various interference scenarios, the research reveals the underlying laws of micro-transmission optical imaging under strong light conditions and establishes a framework for assessing image quality degradation and detection range reduction.

Introduction

Low-light level (LLL) imaging systems, essential for night-time reconnaissance, are designed to amplify minimal ambient light. However, the modern battlefield is frequently punctuated by "strong light interference" from flares, explosions, and fires. These intense sources trigger internal protection mechanisms, specifically Automatic Brightness Control (ABC), to prevent hardware damage. While ABC protects the sensor, it simultaneously slashes the system's gain, often causing the intended dim target to vanish into background noise. This paper develops a mathematical framework to quantitatively model this response mechanism and predict degradation in detection distance.

Methodology

The researchers developed a comprehensive end-to-end energy transfer model for an LLL television system. The approach involves modeling the system as a sequential chain of components, from the initial objective lens to the final digital output.

Block diagram of the low-light level imaging system architecture.

The core novelty lies in modeling the Microchannel Plate (MCP) gain ($G_{mcp}$) as a variable that adjusts based on the presence of a strong light source ($L_{Light}$). A suppression ratio ($n$) is defined to represent how the system's voltage conversion gain is attenuated to maintain dynamic range. Using these derivations, the team simulated a target vehicle under various interference scenarios, varying the position (front, back, left, right) and height of the light source.

System Response and the "S" Curve

A critical insight from the study is the characteristic "S-shaped" response curve of LLL systems. The system possesses a narrow "Linearity Work Region" situated between the base noise floor and the saturation region.

The characteristic S-shaped response curve showing the narrow linearity region and the onset of saturation.

Strong light interference pushes the system into the saturation region almost instantly, flattening the contrast of the rest of the scene. Because the ABC mechanism lowers the gain to accommodate the flare, the system effectively "ignores" the dim target it was meant to detect. The model reveals that blinding is not just a function of total light volume, but how that light is spatially distributed across the photocathode.

Results and Discussion

Qualitative visual results from the simulations show a dramatic loss of target detail. For example, when a flame is introduced 40m in front of a target, the vehicle becomes a nearly indistinguishable silhouette against a washed-out background. The simulation also highlighted a correlation with height: as a flare rises, the system's saturation area shifts, which can occasionally allow for partial target recovery depending on the angle.

Objective evaluation utilized metrics such as Mean Square Error (MSE), Peak Signal-to-Noise Ratio (PSNR), and average gradient. The paper successfully links physical radiation parameters (like flare intensity) to digital image quality, providing a tool for engineers to calculate the effective operating distance of a sensor under specific battlefield conditions.

Conclusion

This study provides a robust mathematical foundation for simulating light interference in LLL systems. While the current model assumes a standard atmospheric transmittance and requires further field validation, it offers a significant step toward developing more resilient LLL designs. Future work will focus on incorporating complex atmospheric scattering effects and validating these simulations with real-world empirical data.

Summary updated

Abstract

For the modern battlefield influence flares, fire and other battlefield equipment shimmer light source for imaging performance, such as reconnaissance capability, through the study of the interference signal response mechanism are low light level imaging equipment, optical equipment, gain characteristics, and quantitative analysis of the battlefield fire and flares affect both light sources of interference imaging reconnaissance system for low light level imaging performance, respectively, to simulate the interference source is located in a different location, after radiation -the output image after the combined effect of shimmer system response system, revealing micro -transmission optical imaging equipment in the imaging light interference conditions under the law, the establishment of a study to assess the effect on image quality and detection distance changes under strong interference.
BibTeX
@article{wei2018study,
  author = {Yuan Wei and Yu Wang and Zhang Fang-Fang and Ruan Jiang-Yang and Wang Xiao-Rui and Wang Xiao-Rui and Zhang Jian-Qi and Feng Zhuo-Xiang and Xie Wei-Bo and Zhang Liu Xin and Wang Jian-Qi and Xiao-Rui and Wang Luo Yuan and Jin Ling-Xue and Wei-Qi and Chang Zhang Jun-Ju and Zhang Ben-Kang and Min Bao-Hui and Yuan Chao-Bo and Jiang Yi-Hui and Bin and Guo Bing-Tao and Wang Xiao-Rui and Jing Wei-Guo and Wang Xiao-Bing and Chen Yu-Jiao and Ru Zhibing and Liu Bing and Li Shuangquan},
  title = {{Study on Light Interference Simulation and Performance Evaluation of Low light Imaging System}},
  journal = {Journal of Chemical Biological and Physical Sciences},
  year = {2018},
  doi = {10.24214/jcbps.c.8.1.02836},
}
Figure