Study on Calculation of Nonpoint Source Pollution Load into Taipu River Based on InVEST Model

Huajun Yu, Feng Liu, Weiwei Wu, Xiangpeng Mu, Hui Liu, BaiyinbaoligaoSustainability 2025 · DOI

TL;DR

This study presents an optimized InVEST model framework for accurately calculating nonpoint source pollution loads in complex plain river networks. By refining data inputs and model parameters, the researchers successfully identified key pollution sources and pathways in the Taipu River basin, providing crucial data for targeted environmental management.

What Problem Does This Paper Address?

Managing nonpoint source pollution (NPS) in densely populated, plain river network regions is a significant challenge. These areas often have intricate, interconnected waterways, making it difficult to accurately simulate how pollutants are generated, transported, and ultimately enter specific rivers. Traditional methods struggle with the complexity of these systems, leading to overestimations or underestimations of pollution loads and an inability to pinpoint precise sources and pathways. This lack of precision hinders effective, targeted pollution control strategies. The paper aims to bridge this gap by developing a more robust and applicable method for calculating NPS pollution inflow into specific rivers within these complex environments.

Methods

The core of this research lies in an optimized application of the InVEST model's Nutrient Delivery Ratio (NDR) module. The authors introduced several key enhancements to adapt the model for plain river networks:

  • Land Use Data Reconstruction: The Taipu River was isolated as a distinct receiving water body, while other water bodies (tributaries, lakes) were treated as part of the standard pollution generation-transportation process. This prevents premature termination of pollutant pathways in non-target water bodies.
  • DEM Negative Value Correction: A Digital Elevation Model (DEM) was modified by uniformly lowering the Taipu River's elevation. This created a pronounced elevation depression, significantly improving the model's ability to identify and delineate the river channel and its connectivity with tributaries.
  • Flow Accumulation Threshold Optimization: Sensitivity analyses were performed to determine the optimal flow accumulation threshold. This parameter is crucial for defining river network density. An optimized threshold (20,000) was found to accurately identify the main river channel while minimizing the inclusion of non-contributing tributaries, thus improving the accuracy of the pollution load calculations.

These pre-processing steps allow the InVEST NDR module to more realistically simulate pollutant transport and identify the specific river as the sole terminal sink for pollution.

Datasets

The study utilized the following datasets for the Taipu River basin:

  • DEM data: A 30 m resolution Digital Elevation Model.
  • Land use raster data: A 30 m resolution land use map.
  • Annual precipitation raster data: Data for 2023.
  • Biophysical parameter tables: Standard InVEST parameters, adjusted for local conditions.
  • Calibration parameters: Determined based on actual conditions and literature.
  • Water quality sampling data: Collected from 17 sampling points along the Taipu River in November 2023 and May 2024.
  • Measured flow rate data: Average annual flow rate at the Taipu Gate section in 2023 (128.81 m³/s).
  • Measured average annual concentrations: Total nitrogen (1.08 mg/L) and total phosphorus (0.045 mg/L) in the Taipu River in 2023.
  • Monthly water quality monitoring data: From March 2022 to March 2023, used for calculating degradation coefficients.

Key Insights and Ideas

  • Plain River Networks are Unique: The paper highlights that standard InVEST model applications, designed for more distinct watersheds, struggle with the complex, interconnected nature of plain river networks. The "polder" management system and hydraulic structures (sluice gates, pumps) create unique challenges for defining natural catchment boundaries and simulating flow.
  • Targeted River Modeling is Crucial: Treating the specific target river (Taipu River) as the sole receiving water body, while allowing pollutants to flow into other tributaries and canals within the basin, is a critical adaptation for accurately modeling NPS inflow in these systems.
  • DEM Elevation Manipulation is Effective: Artificially lowering the river's elevation in the DEM is a clever and effective way to enhance the model's ability to delineate river channels and their connectivity in flat terrain.
  • Threshold Optimization Matters: The flow accumulation threshold is not a trivial parameter; its careful selection is vital for accurately representing the river network and avoiding over/underestimation of pollution loads.
  • NPS is a Major Contributor: Even with point source pollution largely controlled, NPS remains the primary driver of pollution in the Taipu River, underscoring the importance of this research.

Key Results

  • Pollution Load Estimates: In 2023, the model estimated total nitrogen (TN) inflow into the Taipu River at 1004.11 t/a and total phosphorus (TP) inflow at 83.80 t/a.
  • Model Validation: Measured data indicated TN inflow of approximately 1300 t/a and TP inflow of about 90 t/a, showing good agreement with model predictions (relative errors of 23% for TN and 7% for TP).
  • Pollution Hotspots Identified: The primary sources of pollution were identified as the Wangning Polders, Chengnan New District Small Watershed, and Chang Yang River Small Watershed, predominantly in the midstream.
  • Environmental Capacity: The Taipu River's environmental capacity for TN is approximately 306.30 t/a, while for TP it is around 227.40 t/a.
  • Capacity Exceeded: Total nitrogen inflow significantly exceeds the river's environmental capacity, while phosphorus is closer to its limit, indicating localized risks.

Limitations and Future Work

  • Model Simplification: The authors acknowledge that the InVEST-NDR model's simplified steady-state approach doesn't fully capture transient impacts from groundwater, sluice/pump operations, and their influence on nitrogen migration and degradation.
  • Data Scarcity: While the proposed method requires less data than mechanistic models, obtaining highly precise localized soil biophysical parameters and detailed groundwater data remains a challenge.
  • Future Research Directions:
    • Integrate higher-precision localized soil biophysical parameters.
  • Account for hydrodynamic effects from sluice/pump regulation.
  • Couple with hydrological/water quality models or machine learning for dynamic simulation and scenario analysis.
  • Further validation in other plain river network regions to address regional characteristics.

Summary updated

Abstract

To address the challenges in simulating nonpoint source pollution inflow, pollutant source distribution, and migration pathways in plain river network regions, this study innovatively proposes an optimized technical framework based on the NDR module of the InVEST model. Through land use data reconstruction, DEM negative value correction, and flow accumulation threshold optimization, the framework effectively resolves key issues including pollutant receiving water identification, runoff path simulation, and pollutant migration termination determination, significantly enhancing the model’s applicability to complex river systems. Using the Taipu River as a case study, this research investigates the spatial distribution characteristics of nonpoint source pollution load inflow and its sources in major rivers within plain river network regions. Results show that in 2023, total nitrogen and total phosphorus inflows into the Taipu River were 1004.11 t/a and 83.80 t/a, respectively, with pollution loads primarily originating from the Wangning Polders in the midstream, Chengnan New District Small Watersheds and Chang Yang River Small Watersheds, mainly entering the Taipu River through tributaries such as the Beijing-Hangzhou Grand Canal and Nanzha Port. Calculations based on measured data indicate total nitrogen and total phosphorus inflows into the Taipu River were approximately 1300 t/a and 90 t/a, respectively, consistent with model predictions. Building on environmental capacity assessment results, this study proposes targeted recommendations for precision-based nonpoint source pollution control in the Taipu River basin. The findings provide scientific evidence and technical paradigms for nonpoint source pollution management and sustainable management in plain river network regions.
BibTeX
@inproceedings{yu2025study,
  author = {Huajun Yu and Feng Liu and Weiwei Wu and Xiangpeng Mu and Hui Liu and Baiyinbaoligao},
  title = {{Study on Calculation of Nonpoint Source Pollution Load into Taipu River Based on InVEST Model}},
  booktitle = {Sustainability},
  year = {2025},
  doi = {10.3390/su18010031},
}
Figure