Study of the Applicability of CMADS Data Based on the BTOPMC Model in the South Yunnan Region—An Example from the Jinping River Basin

Hongbo Zhang, Chunyong Li, Junjie Wu, Boxiang Yin, Hongbin Liu, Guanglei Xie, Yanglin Xie, Ting YangWater 2025 · DOI

TL;DR

This study evaluates the accuracy of the China Atmospheric-Assimilation Dataset (CMADS) for precipitation in southern Yunnan, a data-scarce region, and assesses its utility in driving the BTOPMC hydrological model. The findings suggest CMADS data offers good applicability, particularly for dry periods, and when combined with limited local measurements, significantly improves hydrological simulations for water resource management.

What Problem Does This Paper Address?

Southern Yunnan, a region in China with complex terrain and limited ground-based meteorological stations, faces significant challenges in water resource management and hydrological research. This data scarcity hinders accurate modeling of hydrological processes, which are increasingly critical due to climate change and human activities. The paper aims to address this gap by evaluating the suitability of CMADS, a gridded atmospheric assimilation dataset, as a reliable precipitation input for hydrological models in such data-poor environments.

Methods

The research employed a two-pronged approach:

  1. CMADS Data Accuracy Evaluation: The accuracy of CMADS precipitation data was assessed against measured data from the Yanfengtou rainfall station. This involved evaluating both the likelihood of precipitation events (using metrics like Probability of Detection - POD, False Alarm Rate - FAR, Critical Success Rate - TS, and Probability Density Function Statistic - SS) and the quantitative accuracy of precipitation amounts (using metrics such as Absolute Error - E, Relative Error - RB, Root Mean Square Error - RMSE, Correlation Coefficient - CC, and Coefficient of Determination - R²). These evaluations were performed at annual, monthly, and daily scales, and also categorized by precipitation intensity (light rain, moderate rain, heavy rain, rainstorm).
  2. Hydrological Simulation with BTOPMC Model: The BTOPMC, a distributed hydrophysical model, was used to simulate runoff in the Jinping River basin. Three scenarios were tested to drive the model:
  3. Scenario 1: CMADS data only.
  4. Scenario 2: Measured data only.
  5. Scenario 3: A combination of CMADS and measured data. The simulation performance was evaluated using the Nash-Sutcliffe Efficiency (NSE) coefficient and the ratio of simulated to observed total runoff (Vol).

Datasets

  • CMADS V1.1: China Atmospheric-Assimilation Dataset (daily maximum/minimum temperature, cumulative precipitation, solar radiation, atmospheric pressure, relative humidity, wind speed) from 2008 to 2016.
  • Measured Precipitation Data: Daily precipitation data from five sites (Yanfengtou, Dafutang, Sunzhai, Malutang, and Shuiduchong) in the study area from 2008 to 2016. Yanfengtou was used for accuracy evaluation, while all five were used for driving the model.
  • Measured Hydrological Data: Daily runoff data from Xiaohegou hydrological station (2008-2011).
  • Geospatial Data:
    • Topographic data (30 M GDEMV2).
  • Land use data (1 km resolution, IGBP classification).
  • Soil data (1 km resolution, Digital Soil Map of the World).
  • NDVI data (time series from 2008-2016).

Key Insights and Ideas

  • CMADS shows promise in data-scarce regions: Despite limitations, CMADS provides a valuable precipitation dataset for regions like southern Yunnan where ground-based observations are sparse. Its ability to capture precipitation patterns, especially in dry periods, is a significant advantage.
  • Underestimation during flood periods is a key challenge: A consistent finding is that CMADS tends to underestimate precipitation during heavy rainfall events and flood periods. This is a critical consideration for flood forecasting and management.
  • Combining datasets is crucial for accuracy: The study strongly advocates for integrating CMADS data with available local measurements. This hybrid approach significantly enhances the accuracy of hydrological simulations, providing a more comprehensive understanding of spatial and temporal water resource distribution.
  • BTOPMC is a suitable model for the region: The BTOPMC model demonstrated good performance in simulating runoff in the Jinping River basin across different scenarios, indicating its applicability for hydrological studies in southern Yunnan.

Key Results

  • Precipitation Accuracy:
    • Probability density function statistic (SS) between CMADS and measured data was 0.941, indicating similar probability distributions.
  • Daily precipitation relative error (RB) was -19%, indicating an overall underestimation.
  • 90% of daily precipitation errors were within ±10 mm/day, with errors increasing with higher precipitation.
  • Accuracy generally decreased with increasing precipitation intensity.
  • Hydrological Simulation (BTOPMC Model):
    • Calibration (2008-2009): Nash-Sutcliffe Efficiency (NSE) values were 66.8% (CMADS only), 81.0% (measured only), and 83.9% (combined).
  • Validation (2010-2011): NSE values were 54.5% (CMADS only), 70.2% (measured only), and 74.5% (combined).
  • The combined scenario (Scenario 3) consistently yielded the best simulation results, particularly in dry periods.
  • All three scenarios showed better performance in dry periods than in flood periods.

Limitations and Future Work

  • Flood Period Underestimation: The primary limitation of CMADS data identified is its tendency to underestimate precipitation during flood periods. This may be linked to the underlying satellite products (e.g., CMORPH) used in its generation, which have shown decreased accuracy with increasing precipitation intensity.
  • Limited Spatial Representation: As CMADS data is derived from a limited number of stations in the study area, it may not fully capture the complex spatial and temporal distribution of precipitation.
  • Future Work: The authors suggest further investigation into the accuracy of other meteorological data (temperature, radiation, wind speed) from CMADS. They also propose further research into the variation patterns of water resources in southern Yunnan using the CMADS + BTOPMC model, which could provide valuable technical support for water resource management and hydropower development, especially in the context of climate change and transboundary river management.

Summary updated

Abstract

Data-driven distributed hydrological models utilizing atmospheric assimilation are crucial for simulating hydrological processes, particularly in regions lacking historical observational data, and for managing and developing local water resources due to the impacts of climate change and human activities. The southern part of Yunnan is located at the southwestern border of China, and the small number of observation stations poses a major obstacle to local water-resource management and hydrological research. This paper carries out an evaluation of the accuracy of the China Atmospheric-Assimilation Dataset (CMADS) in southern Yunnan and uses CMADS data and measured data to drive the BTOPMC model to investigate hydrological processes in the Jinping River basin, a representative local sub-basin. The study shows that the probability density function statistic (SS) between CMADS data and the measured precipitation data is 0.941, and their probability density curves of precipitation are basically the same. The relative error of daily precipitation is −19%, with 90% of the daily precipitation error concentrated within ±10 mm/day, which increases as daily precipitation increases. This paper examines three precipitation scenarios to drive the hydrological model, resulting in Nash–Sutcliffe efficiency (NSE) coefficients of 66.8%, 81.0%, and 83.9% for calibration, and 54.5%, 70.2%, and 74.5% for validation. These results indicate that CMADS data possesses a certain degree of applicable accuracy in southern Yunnan. Furthermore, the CMADS-driven BTOPMC model is suitable for simulating hydrological processes and conducting water-resource research in the region. The integration of CMADS data with actual measurement data can enhance the accuracy of hydrological simulations. Overall, the CMADS data have good applicability in southern Yunnan, and the CMADS-driven BTOPMC model can be used for hydrological modeling studies and water-resource management applications in southern Yunnan.
BibTeX
@inproceedings{zhang2025study,
  author = {Hongbo Zhang and Chunyong Li and Junjie Wu and Boxiang Yin and Hongbin Liu and Guanglei Xie and Yanglin Xie and Ting Yang},
  title = {{Study of the Applicability of CMADS Data Based on the BTOPMC Model in the South Yunnan Region—An Example from the Jinping River Basin}},
  booktitle = {Water},
  year = {2025},
  doi = {10.3390/w17121802},
}
Figure