Study of Nanosecond Pulse Laser Micro-Fabrication

Chun Yang Liu, Xing Fu, Yong Wu, Feng Ming Sun, Xiao HuAdvanced 2009 · DOI

Abstract

We study some microstructures fabricated by designed 355nm ultraviolet nanosecond pulse laser micromachining system, which consists of LASER, mechanical and optical structure, 3D work platform, and control system. Nanosecond pulse LASER, with 40ns pulse duration, is chosen as the light source. Mechanical and optical structure is designed for laser beam focusing. Computer software resolves the graphics. And control system based on DSP and FPGA is designed to drive the 3D work platform. Raster sensor is used to measure the real distance that the platform moves. Using this system, some experiments are analyzed and some parameters are optimized. Some microstructures are also fabricated on single crystal silicon wafer and organic glass. The lines of fabricated graphics are 20-40um wide and smooth, with less effect of heat.
BibTeX
@inproceedings{liu2009study,
  author = {Chun Yang Liu and Xing Fu and Yong Wu and Feng Ming Sun and Xiao Hu},
  title = {{Study of Nanosecond Pulse Laser Micro-Fabrication}},
  booktitle = {Advanced},
  year = {2009},
  doi = {10.4028/www.scientific.net/amr.60-61.151},
}

Loading related content...

Figure