Abstract
Biomimetic robots have received more and more attention, as people try to learn from nature in which exist amazing and uniquely evolved mechanisms shown by very species. Fleas, as such one example, are best jumper of all known animals in the world, considering their body size. It can jump about 150 to 200 times its own body length. This paper reports on modeling and simulation of jumping mechanism of a biomimetic robot and provides a guide line for designing and modeling the biomimetic robot that can mimic fleas to jump very high length with respect to its body length.
Introduction
In the field of mobile robotics, navigating "intermittent substrates"—such as slatted surfaces, rocky debris, or stairs—remains a significant hurdle. While wheeled vehicles excel on flat terrain, they are often immobilized by obstacles. Conversely, legged robots offer superior mobility but typically require complex control systems to manage balance during walking gaits.
Jumping presents an elegant alternative, allowing robots to clear large obstacles and traverse gaps with simpler control requirements. However, small-scale robots often lack the instantaneous power density required for significant leaps. This research draws inspiration from the flea (Xenopsylla cheopis), nature's premier jumper, which utilizes a specialized protein called resilin to store and rapidly release energy.
Mechanical Design and Methodology
The proposed biomimetic robot translates biological flea mechanics into a 76.5 mm mechanical system weighing 100g. The design focuses on three core components: energy storage, stability, and variable control.
Energy Storage and Release
The robot replaces biological resilin with two mechanical springs located in the hind legs. A small DC motor and gear system compress these springs to store potential energy. The release is triggered by a mechanical notch and sliding bar, avoiding the weight and power requirements of high-speed electronic latches.
Stability via Cam-Driven Kinematics
A critical innovation is the front leg's cam profile. As the hind legs rotate during spring compression, the robot's center of gravity shifts non-linearly. The specialized cam ensures the front leg moves vertically, maintaining the robot's orientation and ensuring a stable launch angle.
Variable Control
To adapt to different obstacles, a linear actuator adjusts a "moving bar" to vary spring compression. This allows the robot to modulate its jump height and distance dynamically based on the environment.
Simulation and Results
The researchers established a mathematical model based on Newton’s second law and energy conservation, using a discretized approach to simulate the trajectory during the rapid spring release.
Simulation results indicate high performance relative to the robot's scale:
- Jump Performance: The robot achieved a horizontal distance of 2.06 meters and a vertical height of 0.5 meters.
- Relative Distance: The jump distance is approximately 27 times the robot's body length. While less than the flea's 200x record, it represents a major leap for small-scale robotics.
- Dynamics: The system releases 0.48 Joules of energy in just 0.028 seconds, resulting in a takeoff velocity of 4.37 m/s.
Discussion and Conclusion
While the jumping mechanism is highly effective, real-world deployment requires addressing the "landing problem." Like their biological counterparts, these robots may tumble upon landing, which could be catastrophic for onboard electronics. Future iterations will explore active balance or damping systems. Additionally, integrating onboard sensors will be necessary for autonomous navigation.
This study demonstrates that by mimicking the flea's energy-storage principles and utilizing specialized mechanical linkages like cam-driven legs, high-performance jumping is achievable for small-scale, palm-sized robots, providing a blueprint for navigating discontinuous terrain.
Summary updated