Study of a Fiber Optic Fabry-Perot Strain Sensor for Fuel Assembly Strain Detection

Jianan Jiao, Jianjun Chen, Ning Wang, Jie Zhang, Yong Zhu2022 · DOI

TL;DR

This paper presents a novel fiber optic Fabry-Perot (F-P) strain sensing system designed for the harsh environment of nuclear reactor fuel assemblies. The system demonstrates high sensitivity and stability under extreme temperatures, pressures, and flow conditions, offering a promising solution for structural health monitoring in nuclear power plants.

What Problem Does This Paper Address?

Nuclear power plants, particularly those utilizing pressurized water reactors (PWRs), face a critical challenge in monitoring the structural integrity of fuel assemblies. These assemblies are subjected to intense mechanical fatigue due to prolonged exposure to high-velocity coolant flow, leading to potential deformation and safety hazards. Traditional electrical strain sensors are unsuitable for these extreme conditions due to high temperatures and pressures. While fiber optic sensors offer a viable alternative, existing interferometric fiber sensors often struggle to simultaneously meet the demands of high-temperature, high-humidity, and high-pressure operating environments. This paper aims to bridge this gap by developing and validating a robust fiber optic strain sensor specifically tailored for PWR fuel assembly health monitoring.

Methods

The core of this research is a fiber optic Fabry-Perot (F-P) strain sensing system that utilizes a non-scanning correlation demodulation technique. The system's design centers around an F-P sensor with a specially engineered structure featuring a double spring ring. This design aims to enhance strain transfer efficiency from the fuel sheet to the F-P cavity.

Key methodological aspects include:

  • Structural Design: A sensor structure comprising reed rings, fiber optic clamping platforms, and a protective cover made of zirconium alloy was developed. The reed rings are designed to act as strain-sensitive areas, efficiently transferring deformation to the F-P cavity.
  • Strain Transfer Analysis: A detailed theoretical analysis was conducted to model the strain transfer from the fuel sheet to the F-P cavity. This analysis considers the geometry of the sensor, material properties (elasticity modulus), and cross-sectional areas to define a transfer efficiency (K) solely dependent on structural parameters.
  • Thermal Effects Modeling: The paper addresses the impact of temperature on the F-P cavity length due to thermal expansion of various sensor components. Equations are provided to quantify this change and highlight the necessity of calibration.
  • Optical Demodulation: The system employs an optical wedge for demodulation. Light from a laser passes through a coupler to the F-P sensor, where interference occurs. The returning light is then processed by a concave mirror and the optical wedge to achieve cavity length matching and extract strain information.
  • Experimental Validation: The system underwent rigorous testing, including static, dynamic, and thermal-hydraulic experiments, to validate its performance under simulated nuclear reactor conditions.

Datasets

Not discussed in the paper. The experiments were conducted using custom-built calibration and testing rigs.

Key Insights and Ideas

  • Enhanced Strain Transfer: The novel double spring ring design significantly improves the efficiency of transferring strain from the fuel sheet to the F-P cavity, leading to higher measurement sensitivity.
  • Robustness in Harsh Environments: The sensor demonstrates remarkable stability and functionality under high temperatures (up to 300 °C), high pressures, and high-velocity water flow, conditions that typically render conventional sensors inoperable.
  • Temperature Compensation Strategy: While temperature does affect the F-P cavity length, the paper highlights that accurate calibration of the initial cavity length at different temperatures allows for effective elimination of temperature's influence on strain measurement results.
  • Frequency Adaptation: The dynamic testing reveals that the sensing system has good frequency adaptation, performing well within the 10–500 Hz range, which is relevant for detecting vibrations in fuel assemblies.

Key Results

  • High Sensitivity: The static testing demonstrated a strain sensitivity of up to 12.6 nm/με.
  • Accuracy: In static tensile tests, the deviation between the proposed F-P sensor system and an electronic strain gauge was less than 1% for forces up to 5000 N.
  • Stability: Under high-temperature conditions (300 °C), the maximum deviation between loading and unloading curves was less than 1.3%, indicating good stability.
  • Consistency: In thermal-hydraulic experiments, the measurement consistency deviation of the system was less than 1.5% under high-temperature and high-humidity conditions.
  • Temperature Offset: The F-P cavity length offset was less than 0.75% at 200 °C, demonstrating minimal temperature-induced drift after calibration.

Limitations and Future Work

  • Temperature Influence: While the paper addresses temperature effects through calibration, the inherent influence of temperature on the F-P cavity length necessitates careful and regular calibration for optimal accuracy.
  • Long-term Durability: While the sensor demonstrated stability in short-term experiments, its long-term durability and performance over extended periods in the actual nuclear reactor environment would require further investigation.
  • Complex Vibration Modes: The dynamic testing covered frequency sweeps and fixed frequencies. Further exploration of more complex vibration modes and their impact on sensor performance could be beneficial.
  • Integration into Reactor Systems: The paper proposes the sensor for structural health monitoring. Future work could focus on the practical integration of this sensing system into existing or new nuclear reactor designs, including considerations for data acquisition and signal processing within the reactor control systems.

Summary updated

BibTeX
@misc{jiao2022study,
  author = {Jianan Jiao and Jianjun Chen and Ning Wang and Jie Zhang and Yong Zhu},
  title = {{Study of a Fiber Optic Fabry-Perot Strain Sensor for Fuel Assembly Strain Detection}},
  year = {2022},
  doi = {10.3390/s22239097},
}

Loading related content...

Figure