TL;DR
This paper introduces E-pat-plus, a novel patient transfer apparatus designed to reduce caregiver-patient contact and prevent secondary injuries, particularly crucial in infectious disease scenarios like COVID-19. It features a unique five-gear assembly and flat synchronous belt pulley system for cost-effective mechanical design, coupled with a fuzzy PID-based cross-coupling control strategy for safe and stable operation.
What Problem Does This Paper Address?
Transferring patients, especially those with limited mobility, is a physically demanding and time-consuming task for healthcare professionals. This often requires multiple caregivers, increasing the risk of musculoskeletal injuries for both staff and patients. The COVID-19 pandemic exacerbated these issues, highlighting the critical need to minimize direct contact between caregivers and infected patients to prevent transmission and protect healthcare resources. Existing solutions, while helpful, have limitations in terms of cost, adaptability, or patient comfort. This paper aims to address these challenges by developing an automated, safe, and efficient patient transfer system that minimizes physical strain and infection risk.
Methods
The E-pat-plus system employs a two-layer module structure for patient transfer. The mechanical design is a key innovation, featuring:
- Novel Five-Gear Assembly Module: This module allows a single motor to drive belts on both sides, reducing cost and complexity. It incorporates limit blocks to ensure continuous and safe operation by managing the relative speeds of gears and rollers.
- Flat Synchronous Belt Pulley Set: This design reduces the overall thickness of the belt winding on rollers, preventing slippage and runout issues. The flat structure is crucial for achieving a thin profile, essential for sliding under patients.
The control strategy is equally important:
- Fuzzy PID-Based Cross-Coupling Control: This approach combines the robustness of fuzzy logic with the precision of PID control. It aims to eliminate nonlinear uncertainties and improve motor accuracy and anti-interference capabilities.
- Cross-Coupling Synchronization Control: For the upper module's dual motors, this strategy was chosen over parallel or master-slave methods. It ensures synchronized motor movement by using a compensator that extracts the difference between motor speeds, leading to better stability and reduced errors.
Datasets
Not discussed in the paper. The experiments were conducted on the prototype itself, with simulated loads.
Key Insights and Ideas
- Cost-Effective Mechanical Design: The five-gear assembly module is a clever solution to reduce the number of motors required, directly impacting prototype cost and complexity.
- Flat Belt Pulleys for Thinness: The flat synchronous belt pulley set is a significant engineering implication, enabling a thinner device profile which is critical for sliding under patients without causing discomfort or requiring excessive lifting.
- Fuzzy PID for Robustness: Integrating fuzzy logic into PID control provides a more adaptive and resilient system, capable of handling the inherent nonlinearities and uncertainties in mechanical systems and patient transfers.
- Cross-Coupling for Superior Synchronization: The paper convincingly argues that cross-coupling control offers the best performance for synchronizing the dual motors in the upper module, leading to the smallest speed and displacement errors.
- Reduced Caregiver Burden: The core idea of shifting caregiver roles from physical load-bearing to non-contact observation is a significant paradigm shift in patient handling.
Key Results
- Mechanical Design: The five-gear assembly and flat synchronous belt pulley set were successfully integrated into the E-pat-plus prototype.
- Control Strategy: The fuzzy PID controller demonstrated better performance than a classic PID controller, showing smaller overshoot and error in unit step response tests.
- Synchronization: The cross-coupling synchronization control strategy significantly reduced speed and displacement errors compared to master-slave and parallel synchronization methods.
- Speed Error: Without synchronization, errors were approximately ±3.5-4.5 mm/s for the upper module and ±1.5-1 mm for the lower module. With synchronization, these were reduced to approximately ±1-2 mm/s and ±1 mm/s, respectively.
- Displacement Error: Without synchronization, errors were approximately ±2.5-1 mm for the upper module and ±1.5-1 mm for the lower module. With synchronization, these were reduced to approximately ±1-0.5 mm and ±1-0.5 mm, respectively.
- Load Capacity: Preliminary tests with loads up to 130 kg (rated load) showed that motor currents did not exceed rated limits, indicating safe operation under full load.
Limitations and Future Work
The authors acknowledge several limitations:
- Heavy Weight: The prototype's use of aluminum alloy and stainless steel makes it heavy, potentially posing a challenge for caregivers, especially females, to move the equipment.
- Independent Module Control: The synchronization control is applied separately to the upper and lower modules. The control strategy between the upper and lower modules has not yet been completed, which might contribute to patient discomfort.
Future work proposed includes:
- Lightweighting: Utilizing 3D printing materials for non-critical components to reduce overall weight.
- Advanced Control Strategies: Exploring adaptive control and sliding mode control for potentially better application effects.
- Sensor Integration: Adding distance sensors to detect interference with stretchers/beds and pressure sensors to act as safety switches.
- Extreme Condition Testing: Evaluating the device's stability under extreme conditions, including ultimate load capacity and electromagnetic compatibility.
- Inter-Module Control: Developing a comprehensive control strategy that integrates the upper and lower modules.
Summary updated