TL;DR
This study investigated the spatial and temporal distribution of microplastics (MPs) on three beaches in the Arcachon Bay, France, over a year. The findings reveal that MP concentrations are significantly influenced by environmental factors, particularly wind direction and speed, and that the mouth of the bay acts as a hotspot for MP accumulation. This research highlights the complex dynamics of MP beaching and provides crucial data for understanding and managing plastic pollution in coastal environments.
What Problem Does This Paper Address?
Marine debris, especially microplastics (MPs), is a pervasive global pollutant with significant environmental, economic, and aesthetic implications. While the presence of MPs in the marine environment is well-documented, understanding their distribution, transport, and accumulation on beaches remains a challenge. Specifically, the spatial and temporal variability of beached MPs and the environmental factors driving this phenomenon are not fully understood. This paper aims to address this gap by providing a detailed analysis of MP beaching in a semi-enclosed mesotidal embayment, the Arcachon Bay, and by investigating the influence of key environmental drivers.
Methods
The study employed a comprehensive approach to sample and analyze beached MPs. Monthly sampling was conducted over one year (2019) at three distinct beach locations within the Arcachon Bay: an outside station (OS), a mouth station (MS), and a back station (BS). Sampling focused on MPs (0.5-5 mm) found at the high tide line during an intermediate tidal range. Particles were characterized visually for size, shape, color, and opacity, and then chemically identified using ATR-FTIR spectroscopy. To account for the fraction of visually identified but not chemically analyzed particles, a correction method was applied to estimate MP concentrations. Environmental data, including tidal range, significant wave height, wind speed and direction, and river flow, were collected from local monitoring networks and numerical models. Statistical analyses, including Kruskal-Wallis tests, Wilcoxon tests, Fisher-exact tests, Pearson correlations, and Principal Component Analysis (PCA), were used to assess spatial and temporal variability and the influence of environmental factors.
Datasets
The study utilized environmental data from existing monitoring networks and numerical models:
- Hourly water level measurements: Eyrac station (French Naval Hydrographic and Oceanographic Service - SHOM).
- Hourly wind speed and direction: Cap-Ferret station (French national meteorological service - METEO France).
- Hourly significant wave height and dominant wave direction: Cap-Ferret CANDHIS station (HOMERE wave hindcast database, recalibrated).
- Hourly surface current velocities: Numerical simulations from MARS2D (Modeling and Analysis for Coastal Research MARC).
- Daily river discharge (Q): Salles station (DREAL Aquitaine, Banque Hydro database).
The study period for environmental data spanned from December 2018 to December 2019.
Key Insights and Ideas
- Wind is a dominant driver: The study strongly suggests that wind direction and speed are key factors influencing MP beaching, particularly at the sheltered inner stations (MS and BS). Onshore winds appear to enhance MP accumulation, while offshore winds may hinder it.
- Mouth station as a hotspot: The mouth station (MS) exhibited significantly higher MP concentrations compared to the other two sites. This is attributed to its location at the bay's entrance, strong tidal currents, and exposure to predominant winds, creating a favorable environment for MP accumulation.
- Homogeneity in particle characteristics: Despite spatial differences in MP concentration, the morphometric characteristics (size, shape, color) of the sampled MPs were statistically similar across the three sites. This homogeneity is likely due to the high proportion of pre-production pellets, which are standardized industrial products.
- Seasonal variability: MP beaching displayed a marked seasonal variability, with higher concentrations generally observed during high-energy periods (winter/autumn) characterized by strong winds, high waves, and river discharge, and lower concentrations during low-energy periods (spring/summer).
- Pellets as primary contributors: Pre-production pellets constituted a significant portion (49%) of the collected MP items, highlighting the contribution of industrial activities to MP pollution.
Key Results
- MP Concentrations: Mean MP concentrations varied significantly across the sites: OS (1.8 ± 2.4 MP.m⁻²), MS (36.0 ± 39.2 MP.m⁻²), and BS (2.7 ± 4.4 MP.m⁻²). The MS had significantly higher concentrations than OS and BS.
- Particle Characteristics: No significant differences were found in particle dimensions (length, width), shape composition, opacity, transparency, or roughness between the sites. Pellets were the most abundant shape (45.5% at OS, 50.3% at MS, 34.3% at BS), followed by fragments (27.3% at OS, 40.9% at MS, 34.3% at BS).
- Polymer Composition: Polyethylene (PE) was the dominant polymer (59.1% overall), followed by polystyrene (PS) and polypropylene (PP).
- Environmental Correlations: MP concentrations at MS showed strong positive correlations with river flow (Q) and significant wave height (HS), and moderate correlations with wind speed (Uwind). At OS, correlations with environmental factors were weaker, despite higher exposure to wind and waves.
Limitations and Future Work
- Generalization: The authors acknowledge that generalizing the importance of each environmental factor globally is difficult due to variations in local conditions and the complex interplay of multiple drivers.
- Underestimation at OS: The high exposition of the OS to wind might have dispersed lighter MPs towards the top of the beach before sampling, potentially leading to an underestimation of MP abundance at this site.
- Future Modeling: The study suggests the need for high-resolution numerical modeling to better understand ocean circulation at the bay scale and the influence of inner-bay currents on MP transport. Future studies could couple models like TrackMPD and Mars3D to explore these dynamics further.
- Citizen Science: The protocol developed in this study, along with documentation for recognizing MPs and high tide lines, could be valuable for citizen science initiatives and NGO awareness activities.
- Long-term Data: Collecting more data, especially where multiple environmental and anthropic drivers can be considered individually and in combination, is crucial for a comprehensive understanding.
Summary updated