Stereoselective Synthesis of Highly Substituted Enamides by an Oxidative Heck Reaction

Yu Liu, Dan Li, Cheol‐Min ParkAngewandte 2011 · DOI

Abstract

Functionalization of enamides under Heck conditions has been limited to those with unsubstituted vinyl groups. By tuning reaction parameters that allow for the balance between stability and reactivity of reactants, the oxidative Heck cross-coupling to produce highly substituted enamides in good to excellent yields was achieved (see scheme). The Heck arylation has proven to be among the most versatile reactions for CC bond formation owing to its excellent chemoselectivity, wide functional group tolerability, and simplicity.1 The palladium(0)-mediated catalytic process allows for facile cross-coupling of alkenes with various aryl and heteroaryl halides/pseudohalides. The oxidative Heck reaction has drawn significant attention where arylpalladium(II) species are generated by transmetalation with organometallic counterparts followed by undergoing insertion with alkenes.2 Among the organometallic coupling partners, organoboronic acids have been extensively explored in various transition-metal-mediated reactions owing to their stability, wide availability, and low toxicity. Since the first demonstration of catalytic, oxidative Heck cross-coupling using arylboronic acids by Cho and Uemura,2b significant progress has been made. Despite the recent advances in the field, the limited substrate scope including necessitating steric/electronic bias prompt further improvements. For example, a literature survey shows that examples of Heck cross-coupling with electron-rich alkenes such as enamides are limited to those with simple unsubstituted vinyl groups.3 β-Amidoacrylate moiety represents an important motif that has been widely utilized as synthetic intermediates in the total synthesis of natural products4 as well as preparation of heterocycles5 and β-amino acids through asymmetric hydrogenation.6 These compounds are typically prepared by condensation of β-ketoesters with amides,7 and acylation of β-aminoacrylates.8 Also, transition-metal-mediated reactions have been reported including oxidative amidation of acrylates9 and addition of amides to terminal alkynes,10 which typically provide disubstituted enamides. However, the limitations of these reactions include intolerance for sterically demanding substrates. Thus, finding an efficient synthesis of sterically hindered enamides, such as trisubstituted enamides bearing tertiary amides, remains a challenge. We commenced with a brief screening of solvents employing 1 a and potassium phenyltrifluoroborate11 as the coupling partner in the presence of Pd(OAc)2 (10 mol %), Cu(OAc)2 (3 equiv), and K2CO3 (2 equiv): we quickly identified 20 % AcOH in tert-BuOH as an optimal solvent (see the Supporting Information). Interestingly, while the use of either 1,4-dioxane or tert-BuOH afforded moderate yields when a stoichiometric amount of Cu(OAc)2 was employed (50 % and 54 %, respectively), they were found to be detrimental to the reaction during our screening of oxidants where a catalytic amount of Cu(OAc)2 under 1 atm oxygen was used (1,4-dioxane; 18 % and tert-BuOH; 0 %). On the other hand, pure AcOH as a solvent also resulted in a poor yield (23 %).12 The structure of 3 aa was unequivocally determined by X-ray crystallographic analysis.13 In the screening of bases, the effect of counter cations clearly stood out with larger cations such as potassium and cesium preferred over sodium (Table 1, entry 1 vs. 2–4). Entry R M Oxidant Base Yield [%][e] Entry R M Oxidant Base Ligand[f] Additive[h] Yield [%][e] 1 H BF3K Cu(OAc)2 Na2CO3 6 13 H B(OH)2 Cu(OAc)2/O2 K2CO3 – KHF2 52 2 H BF3K Cu(OAc)2 K3PO4 30 14 H B(OH)2 Cu(OAc)2/O2 K2CO3 dmphen[g] KHF2 26 3 H BF3K Cu(OAc)2 K2CO3 43 15 H B(OH)2 Cu(OAc)2/O2 K2CO3 dppf[g] KHF2 58 4 H BF3K Cu(OAc)2 Cs2CO3 39 16 H B(OH)2 Cu(OAc)2/O2 K2CO3 binap[g] KHF2 18 5 H BF3K Ag2O K2CO3 40 17 H B(OH)2 Cu(OAc)2/O2 K2CO3 bpPCy2 KHF2 64 6 H BF3K AgF K2CO3 39 18 MeO B(OH)2 Cu(OAc)2/O2 K2CO3 bpPCy2 KHF2 31[j] 7 H BF3K BQ K2CO3 11 19 H B(Pin) Cu(OAc)2/O2 K2CO3 bpPCy2 AgF[i] 61 8 H BF3K K2S2O8 K2CO3 32 20 H B(Pin) Cu(OAc)2/O2 K2CO3 bpPCy2 CuF2[i] 48 9 H BF3K K3Fe(CN)6 K2CO3 4 21 H B(Pin) Cu(OAc)2/O2 K2CO3 bpPCy2 CsF[i] 61 10 H BF3K Cu(OAc)2/O2 K2CO3 68 22 H B(Pin) Cu(OAc)2/O2 K2CO3 bpPCy2 KHF2 74 11 MeO BF3K Cu(OAc)2/O2 K2CO3 38[j] 23 H B(Pin) Cu(OAc)2/O2 K2CO3 – KHF2 42 12 H B(OH)2 Cu(OAc)2/O2 K2CO3 23 24 MeO B(Pin) Cu(OAc)2/O2 K2CO3 bpPCy2 KHF2 75[j] With these results in hand, we turned our attention to the screening of oxidants. Although common oxidants such as Ag2O and AgF showed comparable results to Cu(OAc)2, it is of note that the use of a catalytic amount of Cu(OAc)2 (20 mol %) in conjunction with oxygen (1 atm) as a terminal oxidant significantly improved the product yield (68 %, entry 10). Careful analysis of the two reactions employing stoichiometric and catalytic amounts of Cu(OAc)2 revealed that a large amount of Cu(OAc)2 turns out to be detrimental, and promoted rapid protodeborylation (entry 3). However, the reaction conditions employing a catalytic amount of Cu(OAc)2 also gave a poor result when electron-rich 4-methoxyphenyltrifluoroborate was used as a coupling partner. This reaction produced a substantial amount of the protodeborylation product (entry 11). Thus, with the anticipation that the use of different forms of arylboron derivatives would lead to an improvement by altering factors such as the stability of arylboron compounds and rate of reaction of transient intermediates in the catalytic cycle, we examined arylboronic acids and arylboronates.14 Although phenylboronic acid gave a poor result (23 %), addition of KHF2 improved the coupling yield (52 %; entry 12 vs. 13). Encouraged by this result, we initiated the screening of ligands. The use of nitrogen-based ligands such as dmphen appeared to inhibit the catalytic cycle, and afforded the product in 26 % yield (entry 14). Among the phosphine-based ligands screened, bpPCy2 (2-(dicyclohexylphosphino)biphenyl)15 afforded the Heck product in 64 % yield (entry 17). While considering the possibility of the corresponding phosphine oxide bpP(O)Cy2 serving as the active ligand under the oxidative conditions, we found that it failed to give any product (see the Supporting Information). Other phosphine ligands such as binap and dppf showed either inhibition or only marginal improvement (an extensive list of ligand screening can be found in the Supporting Information). However, 4-methoxyphenylbororic acid continued to give a poor yield under the reaction conditions (31 %, entry 18). Noting that the electron-rich aryl trifluoroborate and arylboronic acid rapidly undergo protodeborylation under the reaction conditions, we attempted the use of arylboronate anticipating an improved life span of arylboron species under the reaction conditions. Indeed, the use of pinacol 4-methoxyphenylboronate significantly improved the yield of the coupling product (75 %, entry 24) in contrast to the corresponding trifluoroborate and boronic acids (38 % and 31 %, respectively). Consistently, the use of pinacol phenylboronate also resulted in an improved yield (74 %, entry 22). A control experiment lacking the ligand underscores its pivotal role in the reaction (42 %, entry 23). Screening of fluoride sources identified KHF2 as an optimal additive (entries 19–22). 3 aa (70 %) 3 ab (72 %) 3 ac (81 %) 3 ad (63 %)[c] 3 ae (81 %) 3 af (80 %) 3 ag (80 %) 3 ah (52 %) 3 ba (81 %) 3 ca (57 %) 3 cb (51 %) 3 da (69 %)[d] 3 ea (81 %) 3 fa (71 %) 3 ga (59 %) 3 ha (59 %) 3 ia (77 %) 3 ja (75 %)[e] To probe if the amide carbonyl groups serve as directing groups in the reaction, we attempted a reaction by employing a substrate lacking a carbonyl group. However, the instability of the substrate in the acidic medium led to hydrolysis of the substrate. While directing groups are routinely employed to facilitate CH bond activation,16 their presence is not required in Heck reaction. Nevertheless, we cannot rule out the possibility in more challenging substrates. Next, we turned our attention to the transformation of enamides into β-amino acid derivatives. Subjection of enamide 3 aa to the asymmetric hydrogenation conditions employing the catalyst generated from [Rh(cod)2]BF4 and (R)-Binaphane17 smoothly produced compound 4 in 99 % yield and 93 % ee (see the Supporting Information). In summary, we have developed efficient oxidative Heck cross-coupling conditions that allow for the synthesis of highly substituted enamides that are important synthetic intermediates with a broad utility in various applications. It is notable that modulation of stability and reactivity of arylboron species was found to be the key for the reaction such that the increased life span of arylboron species leads to a decreased background reaction and yet sufficiently reactive to participate in the catalytic cycle upon activation. This reasoning allowed us to identify the described reaction parameters. 1 a (42 mg, 0.25 mmol), 4-methoxyphenylboronic acid pinacol ester 2 b (117 mg, 0.50 mmol), Pd(OAc)2 (5.6 mg, 10 mol %), Cu(OAc)2 (2.3 mg, 5 mol %), 2-(dicyclohexylphosphino)biphenyl (26 mg, 30 mol %), K2CO3 (69 mg, 2 equiv), and KHF2 (78 mg, 4 equiv). tert-BuOH—AcOH (4:1, 2.5 mL) were added to a flask that was subsequently evacuated and back-filled with O2 three times before being heated to 90 °C under O2 (1 atm). The progress of the reaction was monitored by TLC and GC analysis. Upon completion, the reaction mixture was cooled to RT, diluted with ethyl acetate, and filtered through a small pad of Celite. The filtrate was concentrated in vacuo, and the crude material was purified by flash chromatography on silica gel (eluent: 40 % hexanes/ethyl acetate) to afford the product 3 ab (50 mg, 72 %, white solid, mp 88–89 °C). 1H NMR (400 MHz, CDCl3): δ=7.41 (d, J=8.8 Hz, 2 H), 6.91 (d, J=8.8 Hz, 2 H), 6.21 (s, 1 H), 3.84 (s, 3 H), 3.74 (s, 3 H), 3.56 (t, J=7.0 Hz, 2 H), 2.60 (t, J=8.0 Hz, 2 H), 2.23–2.15 ppm (m, 2 H); 13C NMR (100 MHz, CDCl3): δ=175.44, 165.13, 161.68, 148.32, 128.56, 126.94, 114.38, 112.38, 55.42, 51.46, 49.26, 31.72, 19.21; HRMS (ESI): m/z calcd for C15H18NO4 [M+H]+: 276.1236; found: 276.1239. Dedicated to Professor Eun Lee Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.
BibTeX
@inproceedings{liu2011stereoselective,
  author = {Yu Liu and Dan Li and Cheol‐Min Park},
  title = {{Stereoselective Synthesis of Highly Substituted Enamides by an Oxidative Heck Reaction}},
  booktitle = {Angewandte},
  year = {2011},
  doi = {10.1002/anie.201101550},
}

Loading related content...

Figure