State Tracking and Fault Diagnosis for Dynamic Systems Using Labeled Uncertainty Graph

Gan Zhou, Wenquan Feng, Qi Zhao, Hongbo ZhaoSensors 2015 · OpenReview

TL;DR

This paper introduces a novel simulation-based approach for state tracking and fault diagnosis in complex dynamic systems. By combining a Labeled Uncertainty Graph (LUG) with a Monte Carlo technique and a unique look-ahead strategy, the method efficiently identifies system states and potential faults, even in systems with a vast number of possible operational modes.

What Problem Does This Paper Address?

Modern cyber-physical systems, from spacecraft to power plants, are becoming increasingly complex. This complexity makes them more susceptible to unexpected failures due to wear, degradation, or unforeseen circumstances. Accurately tracking the system's behavior and diagnosing faults in real-time is crucial for ensuring their reliability and safety. Traditional methods often struggle with the combinatorial explosion of possible states and fault combinations in these complex systems.

Methods

The core of this paper's contribution lies in its novel approach to state tracking and fault diagnosis. Here's a breakdown:

  • Labeled Uncertainty Graph (LUG): The authors adapt the LUG, a concept from AI planning, to represent the dynamic diagnosis process. It visualizes possible system states, transitions, and their associated uncertainties.
  • Monte Carlo (MC) Technique: To handle the probabilistic nature of system models, the MC technique is employed. Instead of exact calculations, it uses a set of "particles" to approximate the probability distribution of system states (belief states).
  • Unit Weight Particles: A key departure from standard MC methods is the use of unit weight particles. This simplifies the process by not requiring re-sampling based on observations at each step, but it introduces the challenge of sample impoverishment.
  • Tagged Particles: Each particle is uniquely tagged. This allows for the reconstruction of system evolution trajectories, which is vital for understanding how faults propagate.
  • One-Step Look-Ahead Strategy: To combat sample impoverishment (where important but low-probability states might be missed), the authors propose a novel "one-step look-ahead" technique. This strategy recursively generates the most likely successor belief states by considering both prior transition probabilities and current observations, without needing to exhaustively check all possibilities.
  • Two-Step Algorithm: The overall approach consists of:
  • Roll-Forward Process: This step estimates the system's current state and identifies potential faults by propagating particles through the LUG.
  • Roll-Backward Process: Once a fault is detected, this step uses the tagged particles to reconstruct and analyze possible system trajectories leading to the fault.

Datasets

The paper evaluates its approach on a simulated real-world system: a subset of a spacecraft's power supply control unit. This subsystem involves multiple components (voltage converters, relays, selectors) with various operational modes and transition constraints. The authors do not introduce a new benchmark dataset but rather use a detailed simulation of a complex system to demonstrate their method's effectiveness.

Key Insights and Ideas

  • Bridging AI Planning and Control: The paper effectively bridges concepts from AI planning (LUG) with model-based diagnosis techniques, offering a new perspective on handling complex dynamic systems.
  • Efficiently Handling Uncertainty: The combination of Monte Carlo sampling with a look-ahead strategy provides a computationally efficient way to manage the high uncertainty and vast state space in complex systems.
  • Sample Impoverishment Mitigation: The proposed one-step look-ahead is a clever solution to a common problem in particle-based methods, allowing for the detection of low-likelihood fault states that might otherwise be missed.
  • Trajectory Reconstruction for Diagnosis: The use of tagged particles for trajectory generation is crucial for post-fault analysis and understanding the root cause of failures.
  • "Anytime" Algorithm: The MC-based approach, combined with the ability to vary the number of particles, makes the algorithm an "anytime" algorithm, meaning it can provide a solution at any point, with accuracy improving as more time/computation is available.

Key Results

  • Effectiveness on a Complex System: The proposed method was successfully applied to a simulated spacecraft power supply control unit, demonstrating its ability to handle a non-trivial real-world example.
  • Improved Fault Detection: The algorithm successfully diagnosed nominal, single, double, and triple faults, showing its capability to handle multiple simultaneous failures.
  • Computational Efficiency: The paper reports low CPU times for single-step mode estimation, even with multiple faults, suggesting the algorithm can operate in near real-time. For instance, with three faults, the average time was around 103ms.
  • Accuracy and Scalability: The approach showed better estimation accuracy compared to k-best BFTE and CDA* algorithms, especially for systems with flatter belief state distributions. The number of particles directly influences accuracy, with more particles leading to better results.
  • Time Performance: While the proposed LUG method with 500 particles consumed more time (292ms) than k-best CDA* with k=1 (587ms) for a similar number of belief states, it achieved significantly higher accuracy and could capture more belief states. The advantage of the proposed method becomes more apparent as the number of obtained belief states or trajectories increases.

Limitations and Future Work

  • Fixed Transition Probabilities: The current experimental setup uses fixed transition probabilities. The authors suggest that introducing variance into these probabilities would be a valuable future direction, as real-world systems often have dynamic transition behaviors.
  • Large-Scale Systems: For extremely large-scale complex systems, the computational complexity might still be a concern. The authors propose exploring distributed diagnosis techniques to further reduce this complexity.
  • "Anytime" Nature: While the algorithm is "anytime," the trade-off between accuracy and time efficiency is managed by varying the number of particles. Further research could explore more sophisticated ways to dynamically adjust this trade-off.

Summary updated

Abstract

Cyber-physical systems such as autonomous spacecraft, power plants and automotive systems become more vulnerable to unanticipated failures as their complexity increases. Accurate tracking of system dynamics and fault diagnosis are essential. This paper presents an efficient state estimation method for dynamic systems modeled as concurrent probabilistic automata. First, the Labeled Uncertainty Graph (LUG) method in the planning domain is introduced to describe the state tracking and fault diagnosis processes. Because the system model is probabilistic, the Monte Carlo technique is employed to sample the probability distribution of belief states. In addition, to address the sample impoverishment problem, an innovative look-ahead technique is proposed to recursively generate most likely belief states without exhaustively checking all possible successor modes. The overall algorithms incorporate two major steps: a roll-forward process that estimates system state and identifies faults, and a roll-backward process that analyzes possible system trajectories once the faults have been detected. We demonstrate the effectiveness of this approach by applying it to a real world domain: the power supply control unit of a spacecraft.
BibTeX
@inproceedings{zhou2015state,
  author = {Gan Zhou and Wenquan Feng and Qi Zhao and Hongbo Zhao},
  title = {{State Tracking and Fault Diagnosis for Dynamic Systems Using Labeled Uncertainty Graph}},
  booktitle = {Sensors},
  year = {2015},
  url = {https://openreview.net/forum?id=i9YKXOCszt},
}
Figure