Spontaneous Radiative Cooling to Enhance the Operational Stability of Perovskite Solar Cells via a Black-body-like Full Carbon Electrode

Bingcheng Yu, Jiangjian Shi, Yiming Li, Shan Tan, Yuqi Cui, Fanqi Meng, Huijue Wu, Yanhong Luo, Dongmei Li, Qingbo MengarXiv 2022 · DOI · arXiv

Abstract

Operational stability of perovskite solar cells (PSCs) is remarkably influenced by device temperature; therefore, decreasing the interior temperature is one of the most effective approaches to prolong service life. Herein, we introduce a spontaneous radiative cooling effect into the PSC and amplify this effect via the functional structure design of a full-carbon electrode (F-CE). With interface engineering, power conversion efficiencies (PCEs) of >19% for inorganic $CsPbI_3$ and >23% for hybrid PSCs have been achieved—the highest reported for carbon electrodes. The highly efficient thermal radiation of this F-CE reduces operating temperatures by approximately 10°C, significantly improving operational stability. Notably, $CsPbI_3$ PSCs exhibited no efficiency degradation after 2,000 hours of continuous operational tracking.

Addressing Thermal Instability in Perovskite Solar Cells

Perovskite solar cells are frontrunners in next-generation photovoltaics due to their high efficiency and low fabrication costs. However, thermal instability remains a critical hurdle. Under standard solar illumination (AM 1.5G), a substantial portion of absorbed energy is converted into heat. This can drive cell temperatures above 100°C, leading to the volatilization of organic components, ion migration, and detrimental phase transitions—such as the shift from the photoactive $\beta$-phase to the non-photoactive $\delta$-phase in $CsPbI_3$.

While active cooling systems exist, they introduce prohibitive costs and complexity. This research proposes a "built-in" passive solution: a custom-engineered electrode that manages heat at the device level without compromising electrical performance.

Design of the Full Carbon Electrode (F-CE)

The researchers developed a triple-layer Full Carbon Electrode (F-CE) to replace traditional metal electrodes like gold. The F-CE consists of a mesoporous contacting layer, a conductive graphite layer, and a thermally radiative layer specifically engineered for high thermal emissivity. To facilitate charge transfer, Carbon Quantum Dots (CQDs) were introduced at the interface. The electrode is applied via a thermal-press method, creating a robust physical bond that surpasses the contact quality of evaporated gold.

Emissivity and conductance comparison of different electrode materials.

Key Insights: The Emissivity Advantage

A primary discovery is the "Emissivity Advantage." Traditional metal electrodes are poor heat radiators; gold, for instance, has an emissivity ($\epsilon$) of only 0.034, effectively trapping heat. In contrast, the F-CE achieves an $\epsilon$ of 0.98, behaving almost as a perfect black body. This allows for "dual-face radiation," where heat is dissipated from both the front and back of the cell. This spontaneous radiative cooling is a passive process that remains effective even in a vacuum, making it potentially suitable for space applications.

Performance and Cooling Results

The F-CE based cells achieved record-breaking efficiencies for carbon-electrode PSCs: 19.13% PCE for inorganic $CsPbI_3$ and 23.5% for hybrid cells. These results narrow the performance gap with expensive gold electrodes to less than 1%.

More importantly, the F-CE significantly lowered operating temperatures. Under 1-sun illumination, the surface temperature of F-CE cells was 10.1°C lower than that of gold-based control cells. This 10°C reduction is critical for $CsPbI_3$, as it keeps the material below the phase-transition threshold.

Infrared thermography showing the temperature distribution of various electrode films under illumination.

Exceptional Operational Stability

The cooling effect translated directly into enhanced longevity:

  • Continuous Operation: $CsPbI_3$ cells showed zero degradation after 2,000 hours of continuous tracking.
  • Thermal Cycling: In tests between -20°C and 60°C, F-CE cells retained 95% of their initial PCE after 100 cycles, whereas gold-based cells lost over 35% of their efficiency.

Conclusion and Future Directions

The F-CE provides a dual benefit of high electrical performance and passive thermal management. While the 19.1% efficiency for $CsPbI_3$ is a record for carbon electrodes, it still slightly trails gold controls (20.1%). Future work will focus on further interface engineering to close this gap and exploring the scalability of the thermal-press method for large-area industrial manufacturing.

Summary updated

Abstract

Operational stability of perovskite solar cells is remarkably influenced by the device temperature, therefore, decreasing the interior temperature of the device is one of the most effective approaches to prolong the service life. Herein, we introduce the spontaneous radiative cooling effect into the perovskite solar cell and amplified this effect via functional structure design of a full-carbon electrode (F-CE). Firstly, with interface engineering, >19% and >23% power conversion efficiencies of F-CE based inorganic CsPbI3 and hybrid perovskite solar cells have been achieved, respectively, both of which are the highest reported efficiencies based on carbon electrode and are comparative to the results for metal electrodes. Highly efficient thermal radiation of this F-CE can reduce the temperature of the operating cell by about 10 °C. Compared with the conventional metal electrode-based control cells, the operational stability of the above two types of cells have been significantly improved due to this cooling effect. Especially, the CsPbI3 PSCs exhibited no efficiency degradation after 2000 hours of continuous operational tracking.
BibTeX
@misc{yu2022spontaneous,
  author = {Bingcheng Yu and Jiangjian Shi and Yiming Li and Shan Tan and Yuqi Cui and Fanqi Meng and Huijue Wu and Yanhong Luo and Dongmei Li and Qingbo Meng},
  title = {{Spontaneous Radiative Cooling to Enhance the Operational Stability of Perovskite Solar Cells via a Black-body-like Full Carbon Electrode}},
  year = {2022},
  eprint = {2205.13103},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2205.13103},
}

Loading related content...

Figure