Spin dependent tunneling devices fabricated using photolithography

R.s. Beech, John M. Anderson, J.m. Daughton, B.a. Everitt, Dexin WangIEEE Transactions on Magnetics 1996 · DOI

Abstract

Spin dependent tunneling (SDT) devices have been fabricated using standard photolithographic techniques. The SDT film was RF sputtered NiFeCo(125 /spl Aring/)/Al/sub 2/O/sub 3/(20 /spl Aring/)/CoFe. Device resistances ranged from 1 K/spl Omega/ to 12.9 K/spl Omega/ for device areas of 1000 /spl mu/m/sup 2/ (10 /spl mu/m X 100 /spl mu/m) to 84.5 /spl mu/m/sup 2/ (6.5 /spl mu/m X 13 /spl mu/m), respectively. Peak GMR was over 4% at low bias with saturation fields around 10 Oe. Hard layer switching fields were about 50 Oe. Memory operation was demonstrated using integrated metallization for supplying read/write fields.
BibTeX
@article{beech1996spin,
  author = {R.S. Beech and John M. Anderson and J.M. Daughton and B.A. Everitt and Dexin Wang},
  title = {{Spin dependent tunneling devices fabricated using photolithography}},
  journal = {IEEE Transactions on Magnetics},
  year = {1996},
  doi = {10.1109/20.539127},
}

Loading related content...

Figure