Spatio-temporal variations and factors of a provincial PM2.5 pollution in eastern China during 2013–2017 by geostatistics

Xue Sun, Xiao‐San Luo, Jiangbing Xu, Zhen Zhao, Yan Chen, Li-Chun Wu, Qi Chen, Dan ZhangScientific 2019 · DOI

Abstract

Fine particulate matter (PM<sub>2.5</sub>) is a typical air pollutant and has adverse health effects across the world, especially in the rapidly developing China due to significant air pollution. The PM<sub>2.5</sub> pollution varies with time and space, and is dominated by the locations owing to the differences in geographical conditions including topography and meteorology, the land use and the characteristics of urbanization and industrialization, all of which control the pollution formation by influencing the various sources and transport of PM<sub>2.5</sub>. To characterize these parameters and mechanisms, the 5-year PM<sub>2.5</sub> pollution patterns of Jiangsu province in eastern China with high-resolution was investigated. The Kriging interpolation method of geostatistical analysis (GIS) and the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model were conducted to study the spatial and temporal distribution of air pollution at 110 sites from national air quality monitoring network covering 13 cities. The PM<sub>2.5</sub> pollution of the studied region was obvious, although the annual average concentration decreased from previous 72 to recent 50 μg m<sup>-3</sup>. Evident temporal variations showed high PM<sub>2.5</sub> level in winter and low in summer. Spatially, PM<sub>2.5</sub> level was higher in northern (inland, heavy industry) than that in eastern (costal, plain) regions. Industrial sources contributed highest to the air pollution. Backward trajectory clustering and potential source contribution factor (PSCF) analysis indicated that the typical monsoon climate played an important role in the aerosol transport. In summer, the air mass in Jiangsu was mainly affected by the updraft from near region, which accounted for about 60% of the total number of trajectories, while in winter, the long-distance transport from the northwest had a significant impact on air pollution.

Introduction

Despite rapid economic growth, China has faced severe environmental challenges, specifically "haze" dominated by PM<sub>2.5</sub> (fine particulate matter). While national trends are often reported, air quality is a deeply local issue influenced by specific city layouts, industrial types, and micro-climates. This study focuses on Jiangsu—a province that serves as a microcosm of China’s economy with its mix of heavy industry in the north and high-tech coastal development in the south—to untangle how much of the pollution is "homegrown" versus "imported" via atmospheric transport.

Methodology

The study employed a multi-pronged geostatistical and atmospheric modeling approach using data from 110 national monitoring stations across 13 cities in Jiangsu (2013–2017).

  • Kriging Interpolation: A GIS-based method used to create continuous spatial maps of pollution across the province.
  • HYSPLIT Modeling: 72-hour backward trajectories were used to trace air masses back to their origins (e.g., local updrafts vs. Siberian winds).
  • Potential Source Contribution Factor (PSCF): This statistical method identified geographic regions outside the province contributing to local PM<sub>2.5</sub> levels.
  • Socio-economic Correlation: Pollution data was correlated with provincial yearbooks covering GDP, vehicle ownership, and industrial emission types (soot, SO<sub>2</sub>, NO<sub>x</sub>).

Seasonal and Temporal Dynamics

PM<sub>2.5</sub> levels follow a predictable but extreme "U-shaped" seasonal cycle, where winter levels are often more than double those of summer. This is attributed to a "perfect storm" of stagnant air, low boundary layers, and reduced precipitation. Furthermore, in winter, Jiangsu is significantly impacted by long-distance transport from the northwest, with air masses from Inner Mongolia, Shanxi, and Hebei carrying heavy pollutant loads.

Daily PM2.5 concentrations across Jiangsu (2013–2017) showing seasonal fluctuations against WHO and CAAQS standards.

Key Results and Policy Impact

The data reveals a clear downward trend in pollution, with annual mean PM<sub>2.5</sub> dropping from 71.8 μg/m³ in 2013 to 49.6 μg/m³ in 2017. This 31% decrease suggests that provincial efforts to renovate coal-fired boilers and promote clean energy are yielding measurable results. The proportion of "pollution days" plummeted from 34.2% in 2013 to 15.6% in 2017.

Seasonal average PM2.5 concentrations from 2013 to 2017, highlighting the overall downward trend.

Spatially, the study categorized cities into four zones. The "Heavy Industrial" north (e.g., Xuzhou) had the highest concentrations (avg. 59 μg/m³), while "Coastal" regions (e.g., Yancheng and Nantong) were the cleanest (avg. 43 μg/m³), benefiting from the "self-purification" effect of clean ocean air and prevailing monsoon winds.

Conclusion and Future Directions

While ground-based monitoring and Kriging interpolation provide valuable insights, they have inherent limitations in capturing air quality in remote areas. Future research should integrate satellite-retrieved aerosol optical depth (AOD) data with ground-level observations using Geographically Weighted Regression (GWR). Additionally, more granular source apportionment would help distinguish between vehicle exhaust and specific industrial processes to further refine policy interventions.

Summary updated

Abstract

Fine particulate matter (PM<sub>2.5</sub>) is a typical air pollutant and has adverse health effects across the world, especially in the rapidly developing China due to significant air pollution. The PM<sub>2.5</sub> pollution varies with time and space, and is dominated by the locations owing to the differences in geographical conditions including topography and meteorology, the land use and the characteristics of urbanization and industrialization, all of which control the pollution formation by influencing the various sources and transport of PM<sub>2.5</sub>. To characterize these parameters and mechanisms, the 5-year PM<sub>2.5</sub> pollution patterns of Jiangsu province in eastern China with high-resolution was investigated. The Kriging interpolation method of geostatistical analysis (GIS) and the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model were conducted to study the spatial and temporal distribution of air pollution at 110 sites from national air quality monitoring network covering 13 cities. The PM<sub>2.5</sub> pollution of the studied region was obvious, although the annual average concentration decreased from previous 72 to recent 50 μg m<sup>-3</sup>. Evident temporal variations showed high PM<sub>2.5</sub> level in winter and low in summer. Spatially, PM<sub>2.5</sub> level was higher in northern (inland, heavy industry) than that in eastern (costal, plain) regions. Industrial sources contributed highest to the air pollution. Backward trajectory clustering and potential source contribution factor (PSCF) analysis indicated that the typical monsoon climate played an important role in the aerosol transport. In summer, the air mass in Jiangsu was mainly affected by the updraft from near region, which accounted for about 60% of the total number of trajectories, while in winter, the long-distance transport from the northwest had a significant impact on air pollution.
BibTeX
@inproceedings{sun2019spatio,
  author = {Xue Sun and Xiao‐San Luo and Jiangbing Xu and Zhen Zhao and Yan Chen and Li-Chun Wu and Qi Chen and Dan Zhang},
  title = {{Spatio-temporal variations and factors of a provincial PM2.5 pollution in eastern China during 2013–2017 by geostatistics}},
  booktitle = {Scientific},
  year = {2019},
  doi = {10.1038/s41598-019-40426-8},
}
Figure