Spatial and Temporal Analysis of the Mitigating Effects of Industrial Relocation on the Surface Urban Heat Island over China

Linlin Zhang, Qingyan Meng, Zhenhui Sun, Yunxiao SunISPRS Int. J. Geo Inf 2017 · DOI

TL;DR

This study quantifies the impact of relocating a major steel mill (Shougang Group) from Beijing to Hebei Province on the urban heat island (UHI) effect. Using Landsat thermal infrared data, the research demonstrates a significant mitigation of the UHI in the former industrial site, directly linking it to the cessation of steel production.

What Problem Does This Paper Address?

Urbanization is a global phenomenon, leading to increased impervious surfaces and anthropogenic heat release, which contribute to the urban heat island (UHI) effect. This UHI phenomenon can have detrimental impacts on human health, energy consumption, and local climate. While the general causes of UHI are well-understood (e.g., waste heat from industry, traffic, buildings), quantifying the specific impact of industrial relocation and its subsequent mitigation has been less explored, especially in rapidly industrializing regions like China. This paper addresses the need to understand how relocating polluting industries affects the thermal environment of urban areas, providing valuable insights for urban planning and environmental management.

Methods

The study employed a multi-step remote sensing approach:

  • Land Surface Temperature (LST) Retrieval: Landsat TM and OLI satellite imagery was used to derive LST. This involved converting digital numbers to apparent radiance, calculating land surface emissivity (LSE) using NDVI and a mixed-pixel decomposition method, and then applying a radiance transfer equation and Planck's inverse function to obtain LST.
  • LST Normalization and Classification: To enable temporal comparisons, LST values were normalized to a range of 0 to 1. These normalized values were then classified into five temperature levels using density slicing.
  • Urban Heat Island Ratio Index (URI) Calculation: A quantitative index, the URI, was calculated to assess the intensity of the surface urban heat island (SUHI) effect. This index considers the proportion of high-temperature areas relative to the surrounding environment.
  • Spatial and Temporal SUHI Analysis: Changes in LST levels and URI were analyzed over time (2000, 2005, 2010, 2016) to track the temporal evolution of the UHI. Image differencing was used to visualize spatial changes in temperature levels.
  • Building Area Extraction: An index-based built-up index (IBI) was utilized to differentiate between building and non-building areas, allowing for an analysis of the relationship between land cover and LST.
  • Relationship Analysis: Statistical analysis, including regression, was performed to explore the correlation between URI and steel production data.

Datasets

  • Landsat Images:
    • Landsat 5 Thematic Mapper (TM) images from October 30, 2000; May 4, 2005; and May 20, 2010.
  • Landsat 8 Operational Land Imager (OLI) image from April 18, 2016.
  • Spatial resolution: 30 m.
  • Steel Production Data: Collected from the Shougang Group website for each study year.

Key Insights and Ideas

  • Direct Link Between Steel Production and UHI: The study provides strong evidence that the cessation of steel production at the Shougang site was the primary driver for the significant mitigation of the UHI effect. This highlights the substantial thermal pollution generated by such heavy industries.
  • Effectiveness of Industrial Relocation: Relocating heavy industry can be an effective strategy for reducing localized thermal pollution and improving the urban environment, even if the land cover changes are minimal.
  • Remote Sensing as a Powerful Tool: Landsat thermal infrared data, combined with appropriate processing techniques (normalization, URI), is a feasible and efficient method for monitoring thermal pollution and assessing the impact of urban planning interventions.
  • Spatial Patterns of Mitigation: The UHI mitigation was observed not only in the immediate industrial area but also in the surrounding regions, suggesting a broader positive impact. High-temperature areas associated with specific industrial facilities (blast furnaces, rolling mills) largely disappeared.
  • Land Cover vs. Industrial Activity: While land cover changes were relatively minor, the reduction in industrial activity was the dominant factor in UHI mitigation, underscoring the importance of understanding the thermal properties of different land uses and industrial processes.

Key Results

  • The Urban Heat Island Ratio Index (URI) for the Shougang industrial area decreased significantly from 0.55 in 2005 (peak production) to 0.21 in 2016 (after relocation and cessation of production).
  • The area represented by high temperature levels (4 and 5) decreased from 63.57% in 2005 to 26.07% in 2016.
  • In the surrounding area, green patches (indicating decreased temperature) increased substantially following the relocation, while red patches (increased temperature) in residential areas also saw some increase, possibly due to infrastructure development.
  • A positive correlation was found between steel production and the URI, with an exponential model showing the highest R² value, indicating that increased steel production directly contributes to higher thermal pollution.

Limitations and Future Work

  • Limited Temporal Resolution: The study relied on Landsat data, which has a revisit time of 16 days. This limits the ability to capture diurnal temperature variations.
  • Focus on Surface UHI: The study primarily focused on the surface urban heat island (SUHI), and further research could explore the atmospheric UHI.
  • Influence of Other Factors: While steel production was identified as the main driver, the paper acknowledges that other factors, such as specific iron and steel smelting processes, might also influence energy release and thermal pollution.
  • Future Work: The authors suggest that more research is needed to investigate the influence of production technology on the thermal environment. Additionally, exploring the impact of other industrial processes and their relocation on UHI would be valuable. The application of remote sensing for detecting thermal anomalies and supporting urban planning is highlighted as a promising area.

Summary updated

BibTeX
@article{zhang2017spatial,
  author = {Linlin Zhang and Qingyan Meng and Zhenhui Sun and Yunxiao Sun},
  title = {{Spatial and Temporal Analysis of the Mitigating Effects of Industrial Relocation on the Surface Urban Heat Island over China}},
  journal = {ISPRS Int. J. Geo Inf.},
  year = {2017},
  doi = {10.3390/ijgi6040121},
}
Figure