Sol-gel synthesis and electrochemical performance of NiCo2O4 nanoparticles for supercapacitor applications

Yong Zhang, Yi Ru, Haili Gao, Shiwen Wang, Ji Yan, Kezheng Gao, Xiaodong Jia, Hewei Luo, Hua Fang, Aiqin Zhang, Lizhen WangJournal of Electrochemical Science and Engineering 2019 · DOI

TL;DR

This paper presents a simple and cost-effective sol-gel method for synthesizing NiCo₂O₄ nanoparticles, demonstrating their excellent performance as supercapacitor electrodes. The resulting nanoparticles exhibit high specific capacitance and good cycling stability, making them a promising alternative to expensive materials like RuO₂ for energy storage applications.

What Problem Does This Paper Address?

The ever-increasing demand for efficient and sustainable energy storage solutions, driven by global economic growth and environmental concerns, highlights the critical need for advanced supercapacitor materials. While supercapacitors offer advantages like high power density and long cycle life, their practical application is often hindered by limitations in electrode materials. Carbon-based materials, for instance, suffer from low specific capacitance, while transition metal oxides can have poor electrochemical stability or conductivity. Although RuO₂ is a benchmark material, its high cost and environmental toxicity limit its widespread use. This paper addresses the challenge of finding a cost-effective, high-performance alternative by focusing on NiCo₂O₄, a binary metal oxide with inherent advantages due to its mixed valence states and spinel structure, which can lead to enhanced electrochemical activity and conductivity. The authors aim to optimize the synthesis of NiCo₂O₄ to maximize its potential for supercapacitor applications.

Methods

The researchers employed a facile sol-gel method for synthesizing NiCo₂O₄ nanoparticles. This process involved dissolving nickel and cobalt precursors (Ni(NO₃)₂·6H₂O and CoCl₂·6H₂O) in ethanol, followed by the addition of a surfactant (CTAB) and propylene oxide to initiate hydrolysis and polycondensation, forming a gel. This gel was then aged, dried, and finally calcined in air at a moderate temperature of 350 °C to obtain the NiCo₂O₄ nanoparticles.

To characterize the synthesized materials, a suite of standard techniques was utilized:

  • Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to examine the morphology, size, and distribution of the nanoparticles.
  • X-ray Diffraction (XRD) was employed to determine the crystal structure and phase purity of the NiCo₂O₄.
  • Raman Spectroscopy was used to further confirm the phase formation and structural features.

The electrochemical performance of the NiCo₂O₄ nanoparticles as supercapacitor electrodes was evaluated using:

  • Cyclic Voltammetry (CV) to assess the capacitive behavior and redox processes within a specific potential window and at various scan rates.
  • Galvanostatic Charge-Discharge (GCD) tests to measure specific capacitance at different current densities and to evaluate cycling stability.

The electrode preparation involved mixing the NiCo₂O₄ active material with carbon black and PVDF binder, forming a slurry, and coating it onto a nickel foam current collector.

Datasets

Not discussed in the paper. The study relies on experimental characterization and electrochemical testing of synthesized materials.

Key Insights and Ideas

  • The sol-gel method is a viable and efficient route: The paper demonstrates that a simple, low-temperature sol-gel synthesis followed by calcination can effectively produce NiCo₂O₄ nanoparticles with desirable properties for supercapacitors. This offers a cost-effective and scalable alternative to more complex synthesis methods.
  • Nanoporous structure is key: The observed porous structure between the NiCo₂O₄ nanoparticles is highlighted as a critical factor. This porosity enhances the specific surface area, facilitates ion transport, and shortens electron pathways, all of which are crucial for high electrochemical performance.
  • Moderate calcination temperature is beneficial: Calcining at 350 °C, a relatively moderate temperature, appears to yield nanoparticles with "inferior crystallinity and nanocrystallinity." This is presented as advantageous for supercapacitor applications, as it can lead to better utilization of active material and improved capacitive performance compared to highly crystalline materials.
  • NiCo₂O₄ exhibits pseudocapacitive behavior: The presence of redox peaks in the CV curves confirms that the capacitance is primarily derived from Faradaic reactions involving the Ni and Co ions, characteristic of pseudocapacitors.

Key Results

  • Nanoparticle size: The synthesized NiCo₂O₄ nanoparticles have a diameter of approximately 20-30 nm.
  • High Specific Capacitance: The electrode material achieved a remarkable specific capacitance of 1080 F g⁻¹ at a current density of 1 A g⁻¹.
  • Good Rate Capability: Even at higher current densities, significant capacitance was retained: 800 F g⁻¹ at 4 A g⁻¹, 651 F g⁻¹ at 7 A g⁻¹, and 574 F g⁻¹ at 10 A g⁻¹.
  • Excellent Capacitance Retention: The capacitance retention rate was 74.1% at 4 A g⁻¹, 60.3% at 7 A g⁻¹, and 53.1% at 10 A g⁻¹ (relative to 1 A g⁻¹).
  • Superior Cycling Stability: After 100 cycles at current densities of 4, 7, and 10 A g⁻¹, the NiCo₂O₄ electrode maintained high capacitance retention rates of 94.8%, 91.7%, and 90.8%, respectively, indicating good electrochemical stability.

Limitations and Future Work

  • Limitations: While the paper highlights the excellent performance, the specific capacitance retention at higher current densities (e.g., 53.1% at 10 A g⁻¹) suggests room for further improvement in rate capability. The authors also mention that the "release zone" of ions and internal nanogrids buffer volume changes, implying that volume changes during cycling are a factor, though well-managed by the material's structure.
  • Future Work: The authors conclude that NiCo₂O₄ nanoparticles synthesized via this sol-gel method are a "promising candidate electrode material for supercapacitors." This implies that further research could focus on optimizing the synthesis parameters, exploring different electrolyte systems, and investigating the long-term stability over thousands of cycles to fully realize their potential for commercial applications. The paper also implicitly suggests that exploring composite materials or nanostructuring strategies could further enhance performance.

Summary updated

Abstract

In this work, NiCo2O4 nanoparticles with enhanced supercapacitive performance have been successfully synthesized via a facile sol-gel method and subsequent calcination in air. The morphology and composition of as-prepared samples were characterized using scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray dif­fraction (XRD), and Raman spectroscopy (Raman). The electrochemical per­formances of NiCo2O4 nanoparticles as supercapacitor electrode materials were evalu­ated by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) tests in 3 mol L-1 KOH aqueous solution. The results show that as-prepared NiCo2O4 nanoparticles have diameters of about 20-30 nm with uniform distribution. There are some interspaces between nanoparticles observed, which could increase the effective contact area with the electrolyte and provide fast path for the insertion and extraction of electrolyte ions. The electrochemical tests show that the prepared NiCo2O4 nanoparticles for supercapacitors exhibit excellent electrochemical performance with high specific capacitance and good cycle stability. The specific capacitance of NiCo2O4 electrode has been found as high as 1080, 800, 651, and 574 F g-1 at current densities of 1, 4, 7, and 10 A g-1, respectively. Notably, the capacitance retention rate (compared with 1 A g-1) is up to 74.1 %, 60.3 %, and 53.1 % at current densities of 4, 7, and 10 A g-1, respectively. After 100 cycles, higher capacitance retention rate is also achieved. Therefore, the results indicate that NiCo2O4 material is the potential electrode material for supercapacitors.
BibTeX
@article{zhang2019sol,
  author = {Yong Zhang and Yi Ru and Haili Gao and Shiwen Wang and Ji Yan and Kezheng Gao and Xiaodong Jia and Hewei Luo and Hua Fang and Aiqin Zhang and Lizhen Wang},
  title = {{Sol-gel synthesis and electrochemical performance of NiCo2O4 nanoparticles for supercapacitor applications}},
  journal = {Journal of Electrochemical Science and Engineering},
  year = {2019},
  doi = {10.5599/jese.690},
}
Figure