Sodium Hydroxide-Activated Persulfate Remediation of Sites Contaminated with Moderate Concentrations of Aniline and Analysis of the Microbial Community Characteristics

Chaoqun Si, Youqi Zhang, Xiao YangApplied Sciences 2026 · DOI

TL;DR

This study demonstrates that alkaline activation of sodium persulfate with sodium hydroxide at a 1:1 molar ratio is highly effective (nearly 100% removal) for remediating aniline-contaminated soil. Importantly, this treatment also promotes a rapid recovery of the soil's microbial community structure and function, returning it to a state resembling the original, pre-contamination condition within five days.

What Problem Does This Paper Address?

Aniline is a widely used industrial chemical, but its improper discharge and accidental leaks lead to significant soil and groundwater contamination. Aniline is toxic, persistent, and poses a serious threat to human health and ecosystems. While advanced oxidation processes (AOPs), particularly those using persulfate, show promise for organic pollutant remediation, optimizing their application in complex soil environments and understanding their impact on soil microbial communities remain critical challenges. This paper addresses the need for an effective and environmentally sound method to remediate aniline-contaminated sites, with a specific focus on optimizing the chemical treatment and assessing its ecological consequences on the soil microbiome.

Methods

The researchers employed a multi-faceted approach:

  • Site Selection and Characterization: A specific aniline-contaminated site in Jinan City, China, was chosen. Soil samples were collected from various depths and locations to analyze aniline concentration, pH, and organic matter content.
  • Oxidant and Activator Screening: Various oxidants (Fenton's reagent, sodium persulfate, potassium persulfate, ammonium persulfate) and activators (NaOH, FeSO4·7H2O, CuSO4·5H2O, KOH, activated carbon, scoria) were tested to identify the most effective combination for aniline removal.
  • Optimization Studies: The optimal molar ratio of sodium persulfate (Na2S2O8) to sodium hydroxide (NaOH) was determined. The influence of key environmental factors such as initial aniline concentration, temperature, and soil organic matter content on the oxidation efficiency was investigated.
  • Microbial Community Analysis: High-throughput sequencing (16S rRNA gene sequencing) was used to analyze the soil microbial community structure and diversity. Samples were analyzed before contamination, after contamination, and at various time points after oxidative treatment.
  • Oxidation Product Analysis: Changes in nitrogen (ammonium, nitrate, nitrite) and sulfate concentrations in the soil were monitored during the oxidation process.
  • Soil Surface Morphology: Scanning Electron Microscopy (SEM) was used to observe changes in soil particle surface morphology before and after aniline contamination and oxidative treatment.

Datasets

The study utilized soil samples collected from a real-world aniline-contaminated site in Jinan City, China. This site served as the primary dataset for the investigation. No new benchmark datasets were introduced.

Key Insights and Ideas

  • Synergistic Activation is Key: While persulfates are potent oxidants, their effectiveness is significantly enhanced by alkaline activation. NaOH proved to be the most suitable activator, achieving near-complete aniline removal.
  • The 1:1 Ratio is Optimal: The study pinpointed a 1:1 molar ratio of Na2S2O8 to NaOH as the sweet spot for maximizing free radical generation and achieving the highest aniline removal efficiency (approaching 100%). Deviations from this ratio led to a significant drop in removal rates.
  • Microbial Resilience is Remarkable: Aniline contamination drastically reduced microbial diversity and shifted the community towards aniline-degrading taxa (like Hydrogenophaga). However, the persulfate oxidation treatment not only removed the pollutant but also facilitated a rapid recovery of the microbial community. Within five days, the community structure and inferred functional potential closely resembled the original, pre-contamination state.
  • Environmental Factors Play a Minor Role (Under Optimal Conditions): While temperature and organic matter content can influence oxidation, their impact was relatively minor when the optimal oxidant-activator ratio was used, suggesting the robustness of this remediation approach.
  • Transformation of Nitrogen Species: The oxidation process led to a decrease in ammonium nitrogen and an increase in nitrate and nitrite, indicating the conversion of organic nitrogen to inorganic forms.

Key Results

  • Aniline Removal: The optimal Na2S2O8/NaOH ratio of 1:1 achieved nearly 100% aniline removal from the soil.
  • Concentration Effects: For high aniline concentrations (1000 mg/kg), increasing the oxidant dose was necessary to maintain efficient removal.
  • Environmental Factor Impact: Temperature and organic matter had a "relatively minor impact" on the oxidation reaction under optimal conditions.
  • Nitrogen and Sulfate Changes: Ammonium nitrogen decreased, while nitrate and nitrite increased significantly. Substantial sulfate ion production was observed.
  • Microbial Recovery: Within five days of oxidant application, the microbial community composition shifted from aniline-degrading taxa to a state closely resembling the original community structure and functional potential.

Limitations and Future Work

Limitations:

  • Lab vs. Field Conditions: The oxidation experiments were conducted under controlled laboratory conditions, which may not fully replicate the complexities of field-scale environments (e.g., soil structural heterogeneity, runoff, varying water content).
  • Intermediate Products: The study did not thoroughly investigate the potential formation and persistence of intermediate oxidation products, which is crucial for assessing long-term environmental safety.
  • Short-Term Focus: The study primarily focused on the short-term impact of oxidation on the microbial community. Long-term ecological impacts and soil health require further investigation.
  • Real-time pH Monitoring: Future studies should incorporate real-time pH monitoring to better correlate activation efficiency with environmental factors.

Future Work:

  • Detailed Degradation Pathways: Elucidate the complete degradation pathway and mechanism of aniline using advanced analytical techniques (LC-MS, GC-MS) to identify and quantify intermediate transformation products.
  • Pilot/Field-Scale Trials: Conduct field-scale trials to evaluate injection and distribution strategies in heterogeneous subsurface environments and assess long-term stability under natural climatic conditions.
  • Long-Term Ecological Impacts: Study the long-term effects of residual sulfates and transformed nitrogen forms on soil health and plant growth over multiple growing seasons.
  • Combined Remediation Strategies: Explore the combination of chemical oxidation with bioremediation or phytoremediation to address residual pollutants, manage by-products, and promote comprehensive ecosystem recovery.

Summary updated

Abstract

With the widespread application of aniline, its improper discharge in industrial production and accidental leaks during production and transportation have led to contamination of soil and groundwater environments. Persulfate advanced oxidation technology shows great potential for remediating organic compound pollution. This study focused on a specific aniline-contaminated site to identify oxidants and activators, optimize their ratios, and investigate the effects of relevant factors on oxidative remediation. It also examined changes in the microbial communities at the site before and after contamination, as well as before and after oxidative remediation. We found that the removal efficiency of aniline was most significant when the molar ratio of the optimal oxidant (sodium peroxydisulfate (Na2S2O8)) to the optimal activator (sodium hydroxide (NaOH)) was 1:1. When the initial aniline concentration in the soil reached 1000 mg/kg, it was necessary to increase the amount of the oxidant appropriately to maintain efficient removal. Environmental temperature and the content of organic matter in the soil had a relatively minor impact on the oxidation reaction. Following oxidation, the soil ammonia nitrogen content decreased, whereas nitrate and nitrite concentrations increased, with a significant rise in nitrate levels and substantial production of sulfate ion. Moreover, after aniline contamination, the microbial diversity in the soil of the site decreased, and the abundance of the genus Hydrogenophilus significantly increased. It is noteworthy that following oxidation treatment, the soil microbial community demonstrated a rapid trajectory of functional and structural recovery. Within five days of oxidant application, the community composition shifted from being predominantly composed of aniline-degrading taxa to closely resembling the original site in both community structure and inferred functional potential.
BibTeX
@inproceedings{si2026sodium,
  author = {Chaoqun Si and Youqi Zhang and Xiao Yang},
  title = {{Sodium Hydroxide-Activated Persulfate Remediation of Sites Contaminated with Moderate Concentrations of Aniline and Analysis of the Microbial Community Characteristics}},
  booktitle = {Applied Sciences},
  year = {2026},
  doi = {10.3390/app16041863},
}
Figure