Smart Interference Management xApp using Deep Reinforcement Learning

Mahdi Eskandari, Shipra Kapoor, Keith Briggs, Arman Shojaeifard, Huiling Zhu, Alain MouradarXiv 2022 · DOI · arXiv

TL;DR

This paper introduces a Deep Reinforcement Learning (DRL) based "xApp" designed for the Open Radio Access Network (O-RAN) architecture. By jointly optimizing sub-band masking and transmit power, the proposed system automatically mitigates inter-cell interference, ensuring that even users at the "cell edge" receive a guaranteed quality of service while minimizing overall network power consumption.

What Problem Does This Paper Address?

Interference is the perennial "arch-nemesis" of cellular networks. When multiple base stations (APs) use the same frequency bands, their signals clash, particularly for users located at the boundary between two cells (the cell edge).

Traditional Radio Resource Management (RRM) techniques often struggle because they are either computationally too expensive (NP-hard) or rely on "perfect" Channel State Information (CSI), which is rarely available in real-world deployments. Furthermore, as we move toward 5G and beyond, networks are becoming too complex for manual tuning. The authors tackle the challenge of creating an automated, scalable solution that works within the new O-RAN framework—specifically as an xApp running on a Near-Real-Time RAN Intelligent Controller (RIC).

Methods

The authors propose a two-stage iterative approach to solve the joint optimization of sub-band masking and power allocation:

  1. Sub-band Masking via Deep Q-Learning (DQN): The problem is formulated as a Markov Decision Process (MDP). A DRL agent (the xApp) observes the network state—defined by user data rates and Channel Quality Indicators (CQI)—and decides which sub-bands to "mask" (deactivate) at specific base stations to reduce interference. Using a neural network as a function approximator allows the system to scale without the massive memory requirements of traditional tabular RL.
  2. Power Management Algorithm: Once the sub-bands are allocated, a second algorithm fine-tunes the transmit power. It iteratively reduces the power of the base station with the highest user rates, stopping just before any user’s data rate falls below a predefined minimum threshold ($R_{min}$).

What’s New? Unlike standard RRM, this approach is "model-free," meaning it learns optimal strategies through interaction with the environment rather than relying on rigid mathematical models of radio propagation.

Datasets

The study relies on a simulated environment built in Python (using TensorFlow) that adheres to 3GPP standards.

  • Parameters: 20 MHz total bandwidth divided into 8 sub-bands, 400m cell radius, and a target minimum rate ($R_{min}$) of 17.82 Mbps.
  • Scenarios: The authors evaluated the model across three distinct spatial configurations:
  • Case 1: All users are at the cell edge (maximum interference).
  • Case 2: One user at the edge, one at the center.
  • Case 3: All users at the cell center (minimum interference).

Key Insights and Ideas

  • The "Do Nothing" Reward: A clever tweak in the reward function gives the agent a bonus for "doing nothing" once the minimum rate requirements are met. This prevents the agent from constantly toggling sub-bands and creating network instability.
  • Scalability: By avoiding exhaustive searches—which have a complexity of $O((3^M)^N)$—the DRL approach makes real-time interference management feasible for modern hardware.
  • Contextual Awareness: The agent learns that when users are far apart, they can share more sub-bands. Conversely, when users are at the edge, the interfering AP must deactivate more sub-bands to protect the neighbor's signal.

Key Results

  • Convergence: The DQN agent successfully learned the environment and stabilized its policy after approximately 2,000 training episodes.
  • QoS Guarantee: In all test cases, the xApp successfully brought user data rates above the 17.82 Mbps threshold, even for users who started well below it due to heavy interference.
  • Energy Efficiency: The power management stage significantly reduced transmit power. For example, in Case 1, the system reduced power from the maximum 40 dBm down to roughly 30-35 dBm while still meeting all user requirements.
  • Computational Efficiency: The neural network approach proved much faster than decentralized baselines, making it suitable for the "near-real-time" requirements of O-RAN (control loops between 10ms and 1s).

Limitations and Future Work

  • Simplified Topology: The simulations focused on a two-cell scenario. Real-world deployments involve complex clusters of many hexagonal cells, which will increase the state-space complexity.
  • User Mobility: The current model resets UE locations per episode but doesn't explicitly model high-speed mobility (e.g., users in moving vehicles), which would require even faster adaptation.
  • Future Directions: The authors suggest extending the framework to handle multiple users per cell and integrating more complex O-RAN interfaces (like E2 and A1) for better data ingestion.

Summary updated

Abstract

Interference continues to be a key limiting factor in cellular radio access network (RAN) deployments. Effective, data-driven, self-adapting radio resource management (RRM) solutions are essential for tackling interference, and thus achieving the desired performance levels particularly at the cell-edge. In future network architecture, RAN intelligent controller (RIC) running with near-real-time applications, called xApps, is considered as a potential component to enable RRM. In this paper, based on deep reinforcement learning (RL) xApp, a joint sub-band masking and power management is proposed for smart interference management. The sub-band resource masking problem is formulated as a Markov Decision Process (MDP) that can be solved employing deep RL to approximate the policy functions as well as to avoid extremely high computational and storage costs of conventional tabular-based approaches. The developed xApp is scalable in both storage and computation. Simulation results demonstrate advantages of the proposed approach over decentralized baselines in terms of the trade-off between cell-centre and cell-edge user rates, energy efficiency and computational efficiency.
BibTeX
@misc{eskandari2022smart,
  author = {Mahdi Eskandari and Shipra Kapoor and Keith Briggs and Arman Shojaeifard and Huiling Zhu and Alain Mourad},
  title = {{Smart Interference Management xApp using Deep Reinforcement Learning}},
  year = {2022},
  eprint = {2204.09707},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2204.09707},
}
Figure