Abstract
Optical tweezers have enabled important insights into intracellular transport through the investigation of motor proteins, with their ability to manipulate particles at the microscale, affording femto Newton force resolution. Its use to realize a constant force clamp has enabled vital insights into the behavior of motor proteins under different load conditions. However, the varying nature of disturbances and the effect of thermal noise pose key challenges to force regulation. Furthermore, often the main aim of many studies is to determine the motion of the motor and the statistics related to the motion, which can be at odds with the force regulation objective. In this article, we propose a mixed objective $H_2/H_\infty$ optimization framework using a model-based design, that achieves the dual goals of force regulation and real time motion estimation with quantifiable guarantees. Here, we minimize the $H_\infty$ norm for the force regulation and error in step estimation while maintaining the $H_2$ norm of the noise on step estimate within user specified bounds. We demonstrate the efficacy of the framework through extensive simulations and an experimental implementation using an optical tweezer setup with live samples of the motor protein kinesin; where regulation of forces below 1 pico Newton with errors below 10 percent is obtained while simultaneously providing real time estimates of motor motion.
TL;DR
The authors developed a model-based robust control framework for optical tweezers that simultaneously maintains a constant force on molecular motors and provides real-time estimates of their nanometer-scale steps. By accounting for previously ignored actuator dynamics and thermal noise, they achieved force regulation errors below 10% for sub-picoNewton loads, even as motors move at high speeds.
What Problem Does This Paper Address?
Molecular motors like kinesin are the "workhorses" of the cell, hauling cargo along microtubule tracks in discrete 8nm steps. To study them, researchers use optical tweezers—laser beams that trap a microscopic bead attached to the motor. A critical tool in this field is the constant force clamp, which moves the laser trap to keep a steady "pull" on the motor regardless of its movement.
However, existing force clamps face two major hurdles:
- Low Bandwidth: Most designs ignore the internal dynamics and delays of the actuators (like Acousto-Optic Deflectors or AODs) that steer the laser. This limits how fast the clamp can react to sudden motor steps.
- The Estimation-Regulation Trade-off: Researchers want to keep force constant (regulation) while also seeing exactly when the motor steps (estimation). In the presence of intense thermal noise (Brownian motion), these two goals often conflict. Traditional methods usually rely on "offline" post-processing to find steps, losing the ability to react to motor behavior in real-time.
Methods
The authors treat the optical tweezer as a formal control system and introduce a mixed $H_2/H_\infty$ optimization framework:
- System Identification: Unlike previous works that assume the laser steering is instantaneous, the authors used chirp-wave signals to model the AOD actuator. They identified "right-half plane zeros"—mathematical signatures of delays—that are crucial for stable, high-speed control.
- Mixed-Objective Control:
- $H_\infty$ Norm: Used to minimize the worst-case error in force regulation and the error in estimating the motor's position.
- $H_2$ Norm: Used to constrain the impact of white thermal noise on the motion estimate, effectively acting as an optimal filter.
- Hardware Implementation: The controller was implemented on a high-speed FPGA (Field Programmable Gate Array) with a 50 kHz sampling rate, allowing for sub-millisecond reactions to motor movements.
Datasets
The study validated the controller using two primary methods:
- Simulated Motility: A staircase signal representing 8nm steps at frequencies ranging from 5 to 20 steps/second (simulating motor speeds up to 160 nm/s).
- Experimental In-Vitro Assay: Live samples of the motor protein kinesin-I pulling 1µm polystyrene beads along microtubules. This provided real-world data on biological variability and noise.
Key Insights and Ideas
- Actuator Dynamics are the Bottleneck: The paper demonstrates that the primary reason traditional force clamps fail at high speeds isn't just noise, but the unmodeled lag in the laser-steering hardware.
- Quantifiable Guarantees: By using a model-based approach, the authors can provide mathematical guarantees on performance (e.g., "the error will stay below X% for a motor moving at Y speed"), which is a significant step up from the "tuning by hand" common in many biophysics labs.
- Real-Time "Step" Estimation: By integrating the estimation goal into the controller itself, they can filter out Brownian noise in real-time. This produces a "clean" estimate of the motor's path that matches state-of-the-art offline algorithms, but happens instantaneously.
Key Results
- Superior Regulation: In experiments with live kinesin, the framework maintained sub-pN forces with errors between 4.67% and 7.97%. For comparison, traditional designs under similar conditions showed errors around 17.8%.
- High-Speed Capability: The system remained effective for motors moving at nearly 200 nm/s, which is close to the native speed of kinesin in the cell.
- Precision Estimation: In simulations, the root-mean-square (RMS) error in estimating the 8nm steps was kept below 5 nm, effectively "seeing" through the thermal noise.
Limitations and Future Work
- Bandwidth Trade-offs: The authors note a fundamental trade-off: as you try to estimate faster motor steps, you inevitably let in more thermal noise. There is a "speed limit" to how fast a motor can move before the steps become indistinguishable from noise in real-time.
- Weight Function Tuning: The performance depends on "weight functions" ($W_\eta, W_m$) that define the frequency ranges of noise and signal. Currently, these require some prior knowledge of the motor's behavior.
- Future Directions: The authors suggest that future work could involve "smart" experiments where the laser trap changes its behavior automatically when the controller detects a specific type of motor event (like a stall or a detachment).
Summary updated