Simultaneous Vector Bend and Temperature Sensing Based on a Polymer and Silica Optical Fibre Grating Pair

Binbin Yan, Guoqiang Liu, Jun He, Yanhua Luo, Liwei Yang, Haifeng Qi, Xinzhu Sang, Kuiru Wang, Chongxiu Yu, Jinhui Yuan, Gang-Ding Peng2018 · DOI

TL;DR

This paper introduces a novel hybrid fiber optic sensor that can simultaneously measure both bending and temperature with high sensitivity and resolution. By combining a polymer optical fiber Bragg grating (POFBG) with a silica optical fiber Bragg grating (SOFBG), the sensor overcomes the limitations of individual sensors and enables independent measurement of these two critical parameters.

What Problem Does This Paper Address?

Accurate and simultaneous measurement of both bending and temperature is crucial in many applications, from structural health monitoring to biomedical devices. Traditional fiber Bragg grating (FBG) sensors often struggle to differentiate between the effects of bending and temperature on their wavelength shifts, leading to ambiguous readings. While polymer optical fiber Bragg gratings (POFBGs) offer higher bend sensitivity than their silica counterparts, they still face challenges in achieving simultaneous and independent measurements of both parameters. This paper addresses the need for a robust sensor system capable of disentangling these intertwined effects.

Methods

The core of this research lies in a hybrid sensor head that cleverly combines two types of fiber Bragg gratings: a polymer optical fiber Bragg grating (POFBG) and a silica optical fiber Bragg grating (SOFBG). These gratings are mounted in series on a brass beam. The key idea is to leverage the distinct sensitivities of POFBG and SOFBG to both bending and temperature.

  • Bend Sensitivity: The authors systematically studied the bending response of both POFBG and SOFBG. They found that POFBG exhibits significantly higher bend sensitivity (almost twice that of SOFBG). This difference is attributed to the material properties of polymers and potentially the larger diameter of the POF.
  • Temperature Sensitivity: The temperature response of both gratings was also investigated. A crucial observation is that POFBG has a negative temperature coefficient (wavelength shift decreases with increasing temperature), while SOFBG has a positive one. This opposing behavior is vital for simultaneous sensing.
  • Simultaneous Sensing Scheme: By placing the POFBG and SOFBG in series with different Bragg wavelengths, the combined wavelength shift can be expressed as a matrix equation. This matrix relates the measured wavelength shifts of both gratings to the applied bend and temperature changes. By inverting this matrix, the individual contributions of bend and temperature can be decoupled and calculated.

Datasets

Not discussed in the paper. The experiments involved controlled bending and temperature changes applied to the fabricated sensor.

Key Insights and Ideas

  • POFBG's Superior Bend Sensitivity: The finding that POFBG is nearly twice as sensitive to bending as SOFBG is a significant advantage for bend detection.
  • Opposing Temperature Responses: The contrasting temperature sensitivities (negative for POFBG, positive for SOFBG) are the cornerstone of the simultaneous sensing capability. This allows for a clear mathematical separation of the two effects.
  • Hybrid Sensor Advantage: Combining these two distinct sensors in a single unit creates a powerful system that overcomes the limitations of using either sensor alone.
  • Importance of Mounting: The study highlights how the mounting method (e.g., using sticky tape) can influence the bending response, particularly for the viscoelastic POFBG, underscoring the need for careful experimental setup.

Key Results

  • Bend Sensitivity: POFBG showed sensitivities of approximately 0.533 nm/m⁻¹ (upwards) and 0.695 nm/m⁻¹ (downwards), while SOFBG had sensitivities of around 0.295 nm/m⁻¹ (upwards) and 0.329 nm/m⁻¹ (downwards).
  • Temperature Sensitivity: POFBG exhibited a temperature sensitivity of -0.147 nm/°C, whereas SOFBG had a sensitivity of 0.010 nm/°C (free state) and 0.018 nm/°C (when bonded to the brass beam).
  • Simultaneous Measurement Resolution: With a wavelength resolution of 2.6 pm, the proposed sensor can achieve a resolution of up to 0.012 °C for temperature sensing and 0.008 m⁻¹ for bend sensing.

Limitations and Future Work

  • Viscoelasticity of POF: The paper acknowledges the viscoelastic nature of polymer optical fibers, which can affect the repeatability and response time of the POFBG, especially under repeated bending. This is noted as a potential limitation for highly dynamic applications.
  • Mounting Influence: The study also points out that the mounting method can influence the sensor's performance, suggesting that careful fixation is necessary for optimal and consistent results.
  • Future Applications: The authors suggest that this hybrid sensor is well-suited for applications requiring high sensitivity to both bend and temperature, such as human joint monitoring, robotic systems, and structural health monitoring in challenging environments. Further research could focus on optimizing the sensor packaging and exploring its performance in more complex, real-world scenarios.

Summary updated

BibTeX
@misc{yan2018simultaneous,
  author = {Binbin Yan and Guoqiang Liu and Jun He and Yanhua Luo and Liwei Yang and Haifeng Qi and Xinzhu Sang and Kuiru Wang and Chongxiu Yu and Jinhui Yuan and Gang-Ding Peng},
  title = {{Simultaneous Vector Bend and Temperature Sensing Based on a Polymer and Silica Optical Fibre Grating Pair}},
  year = {2018},
  doi = {10.3390/s18103507},
}

Loading related content...

Figure