Simultaneous separation and concentration of micro- and nano-particles by optically induced electrokinetics

Wenfeng Liang, Na Liu, Zaili Dong, Lianqing Liu, D. John, Gwo‐Bin Lee, Wen J. LiSensors and Actuators A Physical 2013 · DOI

TL;DR

This paper introduces a novel method for simultaneously separating and concentrating micro- and nano-particles using optically induced electrokinetics (OEK). By precisely controlling "virtual" electrodes with light, the researchers demonstrate the ability to sort particles of different sizes (500 nm, 1 µm, and 10 µm) with high efficiency, paving the way for advanced microfluidic applications.

What Problem Does This Paper Address?

In many scientific and engineering fields, such as biosensing and micro-assembly, it's crucial to isolate and manipulate particles of specific sizes. Traditional methods like atomic force microscopy are too slow for large-scale applications, while acoustic waves and opto-electrohydrodynamic assembly have limitations in resolution, throughput, or complexity. Dielectrophoresis (DEP) offers a promising avenue, but fixed electrodes lack flexibility. This paper addresses the need for a dynamic, flexible, and efficient method to separate and concentrate micro- and nano-particles, particularly polystyrene beads, which are common in these applications.

Methods

The core of this work is the use of an Optically Induced Electrokinetics (OEK) chip, also referred to as an Optoelectronic Tweezers (OET) chip. This chip utilizes a photoconductive layer (hydrogenated amorphous silicon, a-Si:H) sandwiched between two transparent conductive electrodes (ITO). By projecting light patterns onto the photoconductive layer, "virtual" electrodes are created. The interaction of an applied AC electric field with these virtual electrodes generates an Optically Induced Dielectrophoresis (ODEP) force.

The authors leverage the principle that the ODEP force's direction (positive or negative) and magnitude depend on the particle's properties, the surrounding fluid's conductivity, and the applied AC frequency. They first theoretically analyze the crossover frequency spectrum for polystyrene beads of different sizes. This analysis helps determine the optimal conditions (fluid conductivity and AC frequency) to achieve either positive or negative DEP for specific particle sizes.

Experimentally, they project various light patterns (e.g., rings, rectangles) onto the OEK chip. By dynamically changing the size and shape of these light patterns, they can manipulate and separate the particles. The key innovation lies in using different ODEP force directionalities and magnitudes, controlled by light patterns and fluid conductivity, to achieve simultaneous separation and concentration of particles with distinct sizes.

Datasets

Not discussed in the paper. The experiments utilize commercially available polystyrene beads of specific sizes (500 nm, 1 µm, and 10 µm) and a deionized water solution with adjusted conductivity using bovine serum albumin (BSA).

Key Insights and Ideas

  • Dynamic Virtual Electrodes: The ability to create and reconfigure electrodes using light projection offers unprecedented flexibility compared to traditional microfabrication.
  • Size-Dependent ODEP Control: The paper demonstrates that by carefully selecting fluid conductivity and AC frequency, the ODEP force can be tuned to selectively attract or repel particles of different sizes. This is a critical insight for achieving size-based separation.
  • Simultaneous Separation and Concentration: The OEK chip can achieve both separation and concentration in a single process, which is highly desirable for microfluidic applications.
  • Theoretical-Experimental Validation: The experimental results closely align with theoretical predictions and numerical simulations, strengthening the validity of the OEK approach.
  • Low Power Consumption: The OEK technology requires significantly less optical power than traditional optical tweezers, making it more practical and less damaging to biological samples.

Key Results

  • Separation of 1 µm and 10 µm beads: Achieved using a combination of negative and positive ODEP forces with a liquid conductivity of 1 x 10⁻³ S/m.
  • Simultaneous Separation of 500 nm, 1 µm, and 10 µm beads: Demonstrated using a shrinking concentric rectangular virtual electrode pattern and a liquid conductivity of 9 x 10⁻³ S/m. The 10 µm beads were concentrated at the center, while the 1 µm and 500 nm beads were manipulated to form distinct patterns.
  • Validation of theoretical crossover frequencies: Experimental results confirmed the predicted crossover frequencies for polystyrene beads, guiding the selection of operating parameters.

Limitations and Future Work

  • Limited to specific particle types: The current study focuses on polystyrene beads. Future work could explore the separation of other micro- and nano-entities, including biological cells.
  • Adhesion of particles: While BSA was used to reduce adhesion, some particles still exhibited adhesion to the chip surface, affecting the separation efficiency for those far from the optical pattern.
  • Dynamic control complexity: While dynamic control is a strength, optimizing the shrinking and shaping of light patterns for complex mixtures might require further refinement.
  • Potential for other electrokinetic forces: The paper acknowledges that other forces (ACEO, ET flow) can coexist. Future research could explore how to leverage or mitigate these forces for enhanced manipulation. The authors suggest that OEK is a powerful technology for rapid sorting and implies its potential for more complex microfluidic tasks.

Summary updated

BibTeX
@inproceedings{liang2013simultaneous,
  author = {Wenfeng Liang and Na Liu and Zaili Dong and Lianqing Liu and D. John and Gwo‐Bin Lee and Wen J. Li},
  title = {{Simultaneous separation and concentration of micro- and nano-particles by optically induced electrokinetics}},
  booktitle = {Sensors and Actuators A Physical},
  year = {2013},
  doi = {10.1016/j.sna.2013.01.020},
}
Figure