Simulation of RF Current Drive in Tokamaks in the Ion Cyclotron Frequency Range
Lists
Only you see this
Abstract
-Introduction.To perform realistic simulations of Radio-Frequency (RF) current drive in tokamak plasmas many different issues ought to be addressed together and selfconsistently [1], such as the propagation and the absorption of the waves, the evolution of the ion and electron distribution functions, the influence of the transport properties of the plasma, and the effects of the plasma equilibrium.A further important issue is the power coupling mechanism from the antenna to the plasma, which represents a crucial element for the "final" performance of the experiments with frequencies in the Ion Cyclotron (IC) range.Although there are satisfactory numerical codes for most of these problems, their integration in an unified package is still in its initial phase.A first step in this integration process is the interface between a solver for the Maxwell-Vlasov equations and one for the Fokker-Planck quasilinear equation for the electron distribution function.In view of the analysis of current drive with the Fast Wave (FW) at IC frequencies, the interface between the TORIC full-wave code [2] and the new QLEFOPS quasilinear code [3] is presented here.In the next Section the analytical derivation of the quasilinear diffusion (QLD) coefficient, including both electron Landau damping and Transit Time damping, is outlined by emphasizing the underlying assumptions.In the third, a few technical aspects of the interface are discussed.Then the results of a significant test are briefly reported and discussed.Finally, the radial profile of the current density and the total current drive efficiencies predicted by the two coupled solvers for a typical scenario on the ASDEX Upgrade (AUG) experiment are reported.
BibTeX
@inproceedings{bilato2001simulation,
author = {R. Bilato and I. V. Pavlenko and Marco Brambilla and F. Meo},
title = {{Simulation of RF Current Drive in Tokamaks in the Ion Cyclotron Frequency Range}},
booktitle = {MPG.PuRe},
year = {2001},
}Loading related content...