Simulation of Non-isothermal Dynamic Crystallization of HDPE in Micro Injection Molding Process
Lists
Only you see this
Abstract
Brabender plasti-corder lab-station was made to simulate the process of micro-injection molding,and the shear induced crystallization of crystalline polymers was investigated in micro-injection molding.When other processing parameters were given,the crystallinity was enhanced from 74.43% to 84.36% as the rotational speed of Banbury blades increased from 40 r/min to 80 r/min,which enhanced with the increase of shear rate that promoted the shear induced crystallization.The crystallinity was enhanced from 74.96% to 79.43% as the melt temperature elevated from 145 ℃ to 185 ℃,which enhanced with the elevation of melt temperature.The crystallinity was enhanced from 77.48% to 80.17% as the shear time increased from 10 min to 20 min,which enhanced with the increase of shear time.Compared with the static DSC experiment results,the dynamic crystallinity was higher than that of static's(79.43% vs.77.48%).Given the same heat history,the action of outer forces like shear stresses would make HDPE melts quicken its crystallization process.Applying the forementioned study results of crystallization process to production of micro-injection molding,the processing parameters,such as melt temperature,injection pressure and injection velocity could be optimized to improve the quality of the molded part from the crystallinity point of view.
BibTeX
@inproceedings{xie2007simulation,
author = {Lei Xie},
title = {{Simulation of Non-isothermal Dynamic Crystallization of HDPE in Micro Injection Molding Process}},
booktitle = {China},
year = {2007},
}Loading related content...