Simulation of Modal Control of Metal Mode-Filtered Vertical-Cavity Surface-Emitting Laser

Jingfei Mu, Yinli Zhou, Chao Chen, Xing Zhang, Jianwei Zhang, Tianjiao Liu, Zhuo Zhang, Yuehui Xu, Gaohui Yuan, Jiye Zhang, Yongqiang Ning, Lijun WangSensors 2024 · DOI

TL;DR

This paper proposes a novel metal-dielectric film structure to precisely control the transverse modes in Vertical-Cavity Surface-Emitting Lasers (VCSELs). By simulating the interaction of metal and oxide apertures, they demonstrate a flexible way to achieve single-mode operation, crucial for high-power, efficient laser applications.

What Problem Does This Paper Address?

Vertical-Cavity Surface-Emitting Lasers (VCSELs) are attractive for their ease of integration and low power consumption, making them ideal for applications like optical storage, laser printing, and 3D sensing. However, many applications demand single transverse mode (SM) operation, especially for high-power output. Traditional oxide-confined VCSELs achieve SM operation by using small oxide apertures, which unfortunately leads to increased resistance and reduced output power. While various methods exist to achieve SM-VCSELs, the precise control over transverse modes, particularly in metal mode-filtered VCSELs (MMF-VCSELs), remains an area needing deeper investigation. This paper aims to address this by providing a detailed simulation-based analysis of how a metal-dielectric film structure can be used to effectively control and discriminate between different optical modes within a VCSEL.

Methods

The authors employ a finite element simulation model using COMSOL software to analyze the MMF-VCSEL structure. This model leverages Maxwell's equations and boundary conditions to identify and characterize the supported transverse electromagnetic modes. They introduce a new parameter, the "optical gain," defined as the ratio of modal loss to the optical confinement factor, to quantify modal discrimination. This parameter helps in understanding how effectively different modes are suppressed. The simulation systematically investigates the impact of key structural parameters, including the number of P-DBR pairs, the size of the metal aperture, and the size of the oxide aperture, on modal behavior. They also define and calculate transverse optical limiting factors to represent the distribution of optical fields within the VCSEL.

Datasets

Not discussed in the paper. The study relies on simulations rather than experimental data or pre-existing datasets.

Key Insights and Ideas

  • Flexible Mode Control: The proposed metal-dielectric film structure offers a flexible way to tune the number, volume, and stability of transverse modes within a VCSEL.
  • Aperture Competition: The interaction between the metal aperture and the oxide aperture plays a critical role in mode filtering. The smaller aperture effectively dictates the optical field confinement.
  • P-DBR Influence: The number of P-DBR pairs significantly impacts how the metal aperture limits the transverse optical field. More P-DBR pairs lead to a weaker limitation by the metal aperture.
  • Optical Gain as a Discriminator: The newly defined "optical gain" parameter effectively characterizes modal discrimination, providing a computational tool to assess the likelihood of a mode lasing. A larger optical gain for a mode means it's less likely to lase.
  • Balancing Performance: The study highlights the need to balance modal discrimination (for single-mode operation) with optical confinement (for efficient output power) by carefully selecting structural parameters.

Key Results

  • The study demonstrates that by adjusting the metal aperture size and the number of P-DBR pairs, significant differences in modal loss between the fundamental LP01 mode and higher-order LP11 modes can be achieved. For instance, with 7 pairs of P-DBRs and a metal aperture smaller than the oxide aperture, strong confinement is observed.
  • The optical confinement factor (Γ) for the LP01 mode is generally larger than for the LP11 mode, except under specific conditions where transverse resonance effects disrupt the LP11 mode's field distribution.
  • A maximum difference in optical gain between the LP11 and LP01 modes is observed at a metal aperture of 4 µm, indicating strong mode discrimination. This difference increases as the number of P-DBR pairs decreases.
  • The optical gain of the fundamental LP01 mode (gop,01) increases as the number of P-DBRs and the metal aperture size decrease, suggesting a trade-off between single-mode stability and slope efficiency.

Limitations and Future Work

The authors acknowledge that their work is based on simulations. While the study provides a comprehensive theoretical basis and calculation method, experimental validation would be the next logical step. Future work could focus on optimizing the structural parameters to achieve a balance between single-mode stability and high slope efficiency, as suggested by their analysis of optical gain. Further exploration into the impact of other parameters, such as the metal layer thickness and material properties, could also be beneficial.

Summary updated

BibTeX
@article{mu2024simulation,
  author = {Jingfei Mu and Yinli Zhou and Chao Chen and Xing Zhang and Jianwei Zhang and Tianjiao Liu and Zhuo Zhang and Yuehui Xu and Gaohui Yuan and Jiye Zhang and Yongqiang Ning and Lijun Wang},
  title = {{Simulation of Modal Control of Metal Mode-Filtered Vertical-Cavity Surface-Emitting Laser}},
  journal = {Sensors},
  year = {2024},
  doi = {10.3390/s24144700},
}

Loading related content...

Figure