Simulation of Control Process of Fluid Boundary Layer on Deposition of Travertine Particles in Huanglong Landscape Water Based on Computational Fluid Dynamics Software (CFD)

Xinze Liu, Wenhao Gao, Yang Zuo, Dong Sun, Weizhen Zhang, Zhipeng Zhang, Shupu Liu, Jianxing Dong, Shikuan Wang, Jian Li, Zheng Chen, Mengyu XuWater 2025 · DOI

TL;DR

This study uses CFD simulations and PIV measurements to investigate how fluid boundary layers influence the deposition of calcium carbonate particles in the unique Huanglong landscape. The research reveals that particle aggregation and settling are strongly correlated with thicker boundary layers and low-velocity zones, particularly near baffles and at the bottom of the channel, providing crucial insights into travertine formation dynamics.

What Problem Does This Paper Address?

Travertine deposits, formed by freshwater carbonate precipitation, are found worldwide and offer valuable environmental records. However, understanding the precise mechanisms of calcium carbonate particle deposition, especially in complex natural environments like the Huanglong landscape with its multi-phase fluid flow (solid, liquid, gas), remains a challenge. The Huanglong area's unique geological and hydrological conditions lead to the formation of distinctive travertine landscapes, but the interplay between fluid dynamics, particularly the boundary layer, and particle behavior in this specific setting requires detailed investigation. This paper aims to bridge this gap by simulating and analyzing the deposition process of calcium carbonate particles under various hydrodynamic conditions relevant to the Huanglong area.

Methods

The researchers employed a multi-faceted approach combining experimental measurements and computational simulations.

  • Particle Image Velocimetry (PIV): This technique was used for real-time measurements of flow field velocity in the Huanglong water source. This provided crucial experimental data to validate the simulation models.
  • Computational Fluid Dynamics (CFD): The study utilized ANSYS Fluent 19 for numerical simulations.
  • Multiphase Flow Modeling: The simulations involved modeling a three-phase flow (air, water, calcium carbonate particles).
  • Continuous Phase: The RNG k-ɛ model was used to simulate the turbulent flow of water.
  • Discrete Phase Model (DPM): This model was employed to track the trajectories and behavior of individual calcium carbonate particles. Particle interactions were not considered due to their low volume fraction.
  • Volume of Fluid (VOF) Model: Used to simulate the water-air interface and understand its distribution.
  • Eulerian Model: Applied to predict the deposition trend of calcium carbonate particles.
  • Boundary Layer Analysis: A significant focus was placed on analyzing the boundary layer, which is critical for understanding fluid behavior near solid surfaces. This involved defining appropriate boundary conditions (no-slip walls), meshing strategies to capture near-wall gradients, and selecting suitable turbulence models.
  • Kinetic Coupling: The study considered density changes due to potential dissolution or precipitation of calcium carbonate, coupling it into the mass conservation equation.
  • Physical Model: A simplified 2D model of the channel was used, with specific dimensions and fluid properties (water density and viscosity, calcium carbonate density, particle size, and initial concentration) defined based on the Huanglong area.

Datasets

Not explicitly discussed as distinct datasets. The study utilized:

  • Experimental data: Collected via Particle Image Velocimetry (PIV) measurements of flow field velocity in the Huanglong landscape water.
  • Field observations: Used for comparison with simulation results, particularly for deposition rates.

Key Insights and Ideas

  • Boundary Layer Dominance: The study strongly emphasizes the critical role of the fluid boundary layer in controlling calcium carbonate particle deposition. Thicker boundary layers, especially at the bottom of the channel and near obstacles like baffles, are directly linked to increased particle aggregation and settling.
  • Low-Velocity Zones as Deposition Hotspots: The research highlights that areas with reduced flow velocities, often found behind baffles (vortices) and within the boundary layer, are prime locations for calcium carbonate deposition. These low-velocity regions allow particles to settle out of the flow more readily.
  • Concentration Surges: Even with a relatively low inlet concentration of calcium carbonate, the simulations showed significant localized increases (up to 1.06%, a 6% surge) in concentration in specific areas, driven by hydrodynamic factors.
  • Baffle Influence: The presence of baffles significantly alters flow patterns, creating low-speed vortex zones that enhance particle accumulation and deposition.
  • Particle Trajectory Predictability: The DPM model proved effective in tracking particle movement and predicting deposition, with a high percentage of simulated particles exiting the channel and a small but significant number undergoing deposition.

Key Results

  • Horizontal Flow: In a horizontal flow scenario, the maximum calcium carbonate concentration reached 1.06%, a 6% increase from the inlet. Aggregation and settling were predominantly observed at the bottom right, where the boundary layer was most pronounced.
  • Inclined Flow with Baffle: With an inclined surface and a baffle, calcium carbonate concentrations significantly increased at the bottom right and behind the baffle, correlating with reduced flow velocities.
  • Deposition Rate: The Discrete Phase Model (DPM) tracked 2424 particles, with 9 undergoing deposition. The overall deposition rate was calculated at 0.371%.
  • Deposition Velocity: The deposition velocities for calcium carbonate particles ranged from 4.06 mm/a to 81.7 mm/a, which closely matched field observations (4–6 mm/a).

Limitations and Future Work

  • Particle Interactions: The study notes that particle interactions were not considered in the DPM simulations due to the low particle volume fraction. Future work could explore the impact of inter-particle forces on deposition.
  • Simplified Model: The simulations used a simplified 2D model for some scenarios. While effective for capturing key phenomena, a full 3D model could provide more comprehensive insights.
  • Experimental Validation: While PIV data was used, further experimental validation across a wider range of conditions would strengthen the findings.
  • Long-Term Dynamics: The simulations focused on short-term flow and deposition. Investigating the long-term evolution of travertine deposits and the influence of varying environmental conditions would be valuable.
  • Other Factors: The paper mentions that factors like temperature and dissolved salt concentration can affect fluid density and particle distribution. Future research could incorporate these variables more explicitly.

Summary updated

Abstract

This research explores the distribution, transport, and deposition of calcium carbonate particles in the colorful pools of the Huanglong area under varying hydrodynamic conditions. The study employs Particle Image Velocimetry (PIV) for real-time measurements of flow field velocity and computational fluid dynamics (CFD) simulations to analyze particle behavior. The findings reveal that under horizontal flow conditions, the peak concentration of calcium carbonate escalated to 1.06%, representing a 6% surge compared to the inlet concentration. Significantly, particle aggregation and settling were predominantly noted at the bottom right of the flow channel, where the flow boundary layer is most pronounced. In the context of inclined surfaces equipped with a baffle, a substantial rise in calcium carbonate concentrations was detected at the channel’s bottom right and behind the baffle, particularly in regions characterized by reduced flow velocities. These low-velocity areas, along with the interaction of the boundary layer and low-speed vortices, led to a decrease in particle velocities, thereby enhancing deposition. The highest concentrations of calcium carbonate particles were found in regions characterized by thicker boundary layers, particularly in locations before and after the baffle. Using the Discrete Phase Model (DPM 22), the study tracked the trajectories of 2424 particles, of which 2415 exited the computational channel and nine underwent deposition. The overall deposition rate was measured at 0.371%, with calcium carbonate deposition rates ranging from 4.06 mm/a to 81.7 mm/a, closely matching field observations. These findings provide valuable insights into the dynamics of particle transport in aquatic environments and elucidate the factors influencing sedimentation processes.
BibTeX
@inproceedings{liu2025simulation,
  author = {Xinze Liu and Wenhao Gao and Yang Zuo and Dong Sun and Weizhen Zhang and Zhipeng Zhang and Shupu Liu and Jianxing Dong and Shikuan Wang and Jian Li and Zheng Chen and Mengyu Xu},
  title = {{Simulation of Control Process of Fluid Boundary Layer on Deposition of Travertine Particles in Huanglong Landscape Water Based on Computational Fluid Dynamics Software (CFD)}},
  booktitle = {Water},
  year = {2025},
  doi = {10.3390/w17050638},
}
Figure