TL;DR
This paper investigates the impact of harmonic currents on the temperature rise of dry-type hollow reactors, crucial components in modern power grids. By developing a coupled electromagnetic and thermal simulation model, the researchers demonstrate that increased harmonic content and frequency lead to higher coil losses and significantly elevate reactor temperatures, posing a risk to operational safety.
What Problem Does This Paper Address?
Modern power grids are increasingly incorporating non-linear loads (like inverters and power supplies) that inject harmonic currents into the system. While series reactors are used to mitigate these harmonics, their own performance under these conditions, particularly dry-type hollow reactors which are prone to magnetic leakage, is not fully understood. Specifically, the paper addresses the challenge of predicting and understanding how these harmonic currents, with varying frequencies and content, affect the temperature distribution within dry-type hollow reactors. This is critical because excessive heat can lead to insulation degradation, overheating, and ultimately, equipment failure, impacting grid reliability and safety.
Methods
The authors employ a multi-physics simulation approach combining electromagnetic and fluid-heat coupling.
- Electromagnetic Simulation: They establish a 2D finite element model of a single wire-turn unit using ANSYS Maxwell to simulate the electromagnetic field. This model is then coupled with an equivalent circuit model to calculate the coil current under various harmonic conditions.
- Fluid-Heat Coupling: A 3D simulation model is developed in COMSOL to analyze the thermal behavior. The losses calculated from the electromagnetic simulation (resistance loss, eddy current loss) are used as heat sources in the fluid-heat coupling model, which simulates natural convection, radiation, and heat conduction to determine the temperature distribution.
- Model Calibration: The simulation model's accuracy is validated by comparing calculated coil currents and resistance values against rated values and analytical calculations, showing a maximum error of less than 4% for coil currents.
Datasets
Not discussed in the paper. The study relies on simulation models and parameters derived from a specific 35kV dry-type hollow reactor.
Key Insights and Ideas
- Harmonics are a significant heat source: The presence of harmonic currents, even at moderate levels, directly increases coil current amplitude and magnetic field strength, leading to higher resistance and eddy current losses.
- Frequency matters: Higher harmonic frequencies exacerbate the problem by distorting the current density distribution, increasing coil resistance, and enhancing local magnetic induction, thereby amplifying eddy current losses.
- Dry-type hollow reactors are sensitive: Due to their magnetic leakage, these reactors are particularly susceptible to eddy current losses in surrounding components, which contributes to overall heating.
- Simulation is key for prediction: The coupled field-circuit and fluid-heat simulation approach provides a robust method for predicting temperature rise under complex harmonic conditions, which is crucial for design and fault prevention.
Key Results
- The study demonstrates that as harmonic frequency increases, the distortion of the total coil current waveform becomes more pronounced.
- Elevated harmonic content leads to a significant increase in magnetic induction intensity. For instance, increasing harmonic content from 10% to 60% increased maximum magnetic induction intensity by 45.61%.
- The reactor surface temperature gradually increases with the superposition of harmonic frequencies. The maximum temperature rose from 377 K to 400 K (a 6.1% increase) as the frequency increased from 250 Hz to 4250 Hz.
- Even with increased harmonic content (up to 50%), the maximum temperature rise remained within acceptable limits for F-class insulation (below 385 K, well below the 95°C limit). However, the paper notes that the combination of multiple frequency harmonics could potentially push temperatures beyond limits.
Limitations and Future Work
- Model Simplification: The authors acknowledge that the finite element modeling software used for simulation has limitations, and the simplification of the reactor coil structure might introduce minor errors (0.19% to 2.53% in coil current parameter validation).
- Experimental Verification: The paper suggests that future work should include experimental testing of the reactor model to further validate the simulation's accuracy and make the findings more rigorous.
- Combined Harmonic Effects: While the paper analyzes the impact of individual harmonic frequencies and content, the complex superposition of multiple harmonic frequencies in real-world scenarios warrants further investigation.
Summary updated