SIMS-depth profile and microstructure studies of Ti-diffused Mg-doped near-stoichiometric lithium niobate waveguide

R. Mohan Kumar, Futoshi Yamamoto, Jiro Ichikawa, Haruki Ryoken, Isao Sakaguchi, Xin Liu, Masaru Nakamura, Kazuya Terabe, Shunji Takekawa, Hajime Haneda, Kenji KitamuraJournal of Crystal Growth 2006 · DOI

TL;DR

This paper investigates the diffusion of titanium (Ti) into magnesium-doped lithium niobate (Mg:LiNbO3) substrates, a crucial step for fabricating optical waveguides. They found that Mg doping significantly reduces Ti diffusion and leads to smoother surfaces, making Mg:LiNbO3 a promising material for high-quality optoelectronic devices.

What Problem Does This Paper Address?

Integrated optics relies heavily on creating waveguides within materials to guide light. Lithium niobate (LiNbO3) is a popular choice due to its excellent optical and electro-optic properties. A common method for creating waveguides in LiNbO3 is Ti in-diffusion, where a thin film of titanium is deposited and then diffused into the substrate at high temperatures. However, this process can introduce stresses and surface imperfections. Furthermore, understanding how doping, particularly with magnesium (Mg), affects Ti diffusion and the resulting material microstructure is critical for optimizing waveguide performance. This paper aims to systematically study the Ti diffusion characteristics and surface morphology in both pure and Mg-doped stoichiometric LiNbO3 (SLN) to assess its suitability for advanced optical devices.

Methods

The researchers employed two primary techniques:

  • Secondary Ion Mass Spectrometry (SIMS): This technique was used to precisely measure the depth profiles of titanium within the LiNbO3 substrates. By analyzing the secondary ions emitted when a primary ion beam bombards the sample, they could determine the concentration of Ti as a function of depth. This allowed them to study the diffusion process and estimate diffusion constants.
  • Atomic Force Microscopy (AFM): AFM was used to examine the surface morphology of the LiNbO3 substrates before and after Ti diffusion and annealing. This provided detailed information about surface roughness, scratches, and the formation of surface structures like terraces and steps.

The Ti in-diffusion process involved depositing a 100 nm Ti film on Z-cut LiNbO3 substrates (both pure and Mg-doped) using e-beam evaporation. The samples were then annealed at 1080°C for varying durations (2 to 23 hours) in a dry air atmosphere.

Datasets

Not discussed in the paper. The study uses custom-prepared LiNbO3 substrates (pure and Mg-doped) as the material for their experiments.

Key Insights and Ideas

  • Mg doping slows down Ti diffusion: The presence of Mg in the LiNbO3 substrate significantly reduces the diffusion constant of Ti compared to pure LiNbO3. This is a key finding for controlling waveguide dimensions and properties.
  • Smoother surfaces with Mg:SLN: Ti-diffused Mg-doped SLN substrates exhibit dramatically improved surface smoothness after annealing, becoming "atomically flat" compared to other samples. This is crucial for minimizing scattering losses in optical waveguides.
  • Surface restructuring during annealing: The annealing process leads to a rearrangement of surface atoms, forming smoother surfaces and terrace-and-step structures. This faceting process is attributed to the drive for reducing surface free energy.
  • Diffusion constant dependence on annealing time: As expected, the Ti diffusion constant decreases with increasing annealing time, indicating a saturation or completion of the diffusion process.

Key Results

  • Diffusion Constant: The diffusion constant for Mg-doped SLN was found to be lower (e.g., 1.84 × 10⁻¹³ cm²/s for 1 mol% Mg:SLN) than for pure SLN (e.g., 6.23 × 10⁻¹² cm²/s). For congruent LiNbO3 (CLN), the diffusion constant was also higher than for SLN.
  • Surface Roughness: The peak-to-valley roughness of Ti-diffused Mg:SLN was significantly lower (around 1.9-5.8 nm) compared to Mg-doped congruent LiNbO3 (Mg:CLN) (6.25-55.60 nm) and pure CLN. The as-prepared Mg:SLN surface had a roughness of about 1.14 nm, which improved to about 0.28 nm after annealing.
  • Ti Depth Profiles: SIMS measurements showed that Ti diffusion profiles could be well approximated by a semi-Gaussian function at temperatures above 1000°C. The penetration depth of Ti decreased with increasing annealing time.

Limitations and Future Work

  • Limitations: The study focuses on a specific annealing temperature (1080°C) and annealing times. The influence of other temperatures and atmospheres on diffusion and surface morphology could be further explored. The paper notes that the diffusion constant might vary due to defect density in the crystals.
  • Future Work: The authors suggest that the ultra-smooth surfaces obtained on Mg:LiNbO3 substrates make them highly attractive for fabricating high-quality optoelectronic devices. Further research could focus on fabricating and characterizing actual waveguides and devices using these optimized substrates. Investigating the effect of higher Mg doping concentrations on diffusion and surface properties could also be beneficial.

Summary updated

BibTeX
@article{kumar2006sims,
  author = {R. Mohan Kumar and Futoshi Yamamoto and Jiro Ichikawa and Haruki Ryoken and Isao Sakaguchi and Xin Liu and Masaru Nakamura and Kazuya Terabe and Shunji Takekawa and Hajime Haneda and Kenji Kitamura},
  title = {{SIMS-depth profile and microstructure studies of Ti-diffused Mg-doped near-stoichiometric lithium niobate waveguide}},
  journal = {Journal of Crystal Growth},
  year = {2006},
  doi = {10.1016/j.jcrysgro.2005.11.069},
}
Figure