Simple Flagellated Soft Robot for Locomotion near Air-Fluid Interface

Yayun Du, Andrew Miller, Mohammad Khalid JawedRoboSoft 2021 · OpenReview

TL;DR

This paper introduces a simple, soft, flagellated robot capable of navigating complex 2D trajectories near an air-fluid interface by exploiting viscosity gradients. By combining experimental validation with a novel discrete elastic rod simulation framework, they demonstrate a control strategy that uses a single binary input to achieve precise path following, paving the way for bio-inspired micro-robotics.

What Problem Does This Paper Address?

Many microorganisms, like bacteria, achieve locomotion in viscous fluids using flagella, which are helical tails that rotate to generate propulsion. This movement occurs at very low Reynolds numbers, where viscous forces dominate over inertial forces. Understanding this biological propulsion is crucial for designing bio-inspired robots for applications such as oil spill cleanup, water quality monitoring, and infrastructure inspection. However, creating such robots, especially at micro-scales, faces significant challenges in miniaturizing power sources and actuation. Furthermore, controlling their movement in complex environments, particularly near fluid interfaces where viscosity and density can vary, is a non-trivial problem. This paper aims to bridge this gap by developing a simple, controllable soft robot that leverages these environmental variations for locomotion.

Methods

The researchers developed a soft robot consisting of a cylindrical head containing a motor and a rotating disk with multiple soft polymeric tails. The key innovation lies in its ability to exploit the non-uniform viscosity near an air-fluid interface. The robot's locomotion is achieved by rotating its tails, which, due to the viscous forces and the tails' elasticity, generate a net propulsive force.

For analysis and control, they employed a two-pronged approach:

  • Experimental Testbed: A centimeter-sized robot was built and tested in glycerin, a viscous fluid. The robot's head was partially exposed to air, creating a viscosity gradient.
  • Numerical Simulation: A Discrete Elastic Rods (DER) method was used to simulate the robot's behavior. This method discretizes the robot into nodes and edges, allowing for the modeling of elastic forces (stretching, bending, twisting) and hydrodynamic forces. The simulation was validated against experimental data.

A crucial aspect of their simulation is the incorporation of Resistive Force Theory (RFT) for tail hydrodynamics and a custom model for the head's drag, accounting for both translation and rotation, and importantly, the varying viscosity. They also developed a control scheme that uses a single binary input to switch the motor's angular velocity, enabling the robot to follow prescribed trajectories.

Datasets

The paper does not explicitly mention or create new datasets for training. Instead, it relies on experimental data collected from their robot prototype in glycerin. This experimental data is used to validate their simulation model and to fit key hydrodynamic parameters (Ct, Cr, Cyr).

Key Insights and Ideas

  • Exploiting Environmental Gradients: The most significant insight is the demonstration that a simple robot can achieve complex 2D motion by actively exploiting variations in fluid viscosity, rather than requiring complex internal mechanisms or external fields.
  • Simplicity as a Design Principle: The robot's design is intentionally simple, with a single binary control signal for its motor. This simplicity is key to its potential for miniaturization and ease of fabrication.
  • Coupled Fluid-Structure Interaction: The paper highlights the intricate interplay between the elastic deformation of the soft tails and the viscous fluid forces, which is fundamental to generating propulsion at low Reynolds numbers.
  • DER for Soft Robots: The successful application of the Discrete Elastic Rods method for simulating the dynamics of a soft, flagellated robot demonstrates its utility for this class of bio-inspired machines.

Key Results

  • The robot successfully navigated both circular and straight-line trajectories by periodically switching the direction of its motor's angular velocity.
  • A control scheme was developed that uses a single binary input to achieve arbitrary 2D path following.
  • The simulation model, after parameter fitting using experimental data, accurately predicted the robot's motion, achieving a ~10% error for different tail configurations.
  • The fitting parameters for the hydrodynamic model (Ct, Cr, Cyr) were successfully estimated, demonstrating the validity of their physics-based approach.

Limitations and Future Work

  • Centimeter-Scale Prototype: The current prototype is centimeter-sized. While the principles are applicable to micro-robots, scaling down presents engineering challenges.
  • Limited Control Complexity: The control scheme is a simple binary switching mechanism. More complex trajectories might require more sophisticated control.
  • Future Work: The authors suggest exploring the efficiency of their simulator to train neural networks for more advanced control strategies. They also envision the development of untethered autonomous micro-robots by exploiting the simplicity of this design. The potential for miniaturization is a key future direction, as smaller scales naturally lead to lower Reynolds numbers where this propulsion mechanism is most effective.

Summary updated

Abstract

A wide range of microorganisms, e.g. bacteria, propel themselves by rotation of soft helical tails, also known as flagella. Due to the small size of these organisms, viscous forces overwhelm inertial effects and the flow is at low Reynolds number. In this fluid-structure problem, a competition between elastic forces and hydrodynamic (viscous) forces leads to a net propulsive force forward. A thorough understanding of this highly coupled fluid-structure interaction problem can not only help us better understand biological propulsion but also help us design bio-inspired functional robots with applications in oil spill cleanup, water quality monitoring, and infrastructure inspection. Here, we introduce arguably the simplest soft robot with a single binary control signal, which is capable of moving along an arbitrary 2D trajectory near air-fluid interface and at the interface between two fluids. The robot exploits the variation in viscosity to move along the prescribed trajectory. Our analysis of this newly introduced soft robot consists of three main components. First, we fabricate this simple robot and use it as an experimental testbed. Second, a discrete differential geometry-based modeling framework is used for simulation of the robot. Upon validation of the simulation tool, the third part of this study employs the simulations to develop a control scheme with a single binary input to make the robot follow any prescribed path.
BibTeX
@inproceedings{du2021simple,
  author = {Yayun Du and Andrew Miller and Mohammad Khalid Jawed},
  title = {{Simple Flagellated Soft Robot for Locomotion near Air-Fluid Interface}},
  booktitle = {RoboSoft},
  year = {2021},
  url = {https://openreview.net/forum?id=C4J7UZGczG},
}
Figure