Serial amplification of tau filaments using Alzheimer's brain homogenates and <scp>C322A</scp> or <scp>C322S</scp> recombinant tau

Alessia Santambrogio, Sofia Lövestam, Michael A. Metrick, Thomas Löhr, Pu Xu, Nicholas C. T. Gallagher, Bernardino Ghetti, Byron Caughey, Sjors H. W. Scheres, Michele VendruscoloFEBS 2025 · DOI

TL;DR

Researchers have developed a more robust in vitro method to generate tau filaments that mimic those found in Alzheimer's disease (AD). By using specific mutations (C322A and C322S) in recombinant tau and employing a seeded aggregation assay (RT-QuIC), they successfully created tau structures that partially resemble disease-associated filaments, offering a better model for studying AD and developing therapies.

What Problem Does This Paper Address?

Alzheimer's disease (AD) and other tauopathies are characterized by the aggregation of tau protein into amyloid filaments within the brain. While cryogenic electron microscopy (cryo-EM) has revealed distinct structural "folds" of these filaments associated with different diseases, replicating these disease-specific structures in a laboratory setting has been a significant challenge. Existing in vitro methods often produce filaments that don't accurately reflect the structures found in diseased brains, hindering our ability to study the underlying mechanisms of tau aggregation and develop targeted therapies. This paper aims to address this gap by developing a more reliable method to generate disease-relevant tau filaments in vitro.

Methods

The core of this study utilizes a real-time quaking-induced conversion (RT-QuIC) assay, a technique originally developed for prion detection, to induce the aggregation of recombinant tau protein. The researchers employed three forms of full-length 0N3R tau: the wild-type, and two variants with single point mutations at cysteine 322 (C322A and C322S). These mutations were chosen because they simplify protein purification by eliminating the need for reducing agents.

The RT-QuIC assay involves seeding recombinant tau with small amounts of Alzheimer's disease (AD) brain homogenates. This seeded approach aims to guide the recombinant tau to adopt the same fold as the tau in the seed. The aggregation process is monitored in real-time using thioflavin T (ThT) fluorescence, which increases as amyloid filaments form.

To further characterize the generated filaments, the researchers employed cryo-electron microscopy (cryo-EM) to determine their high-resolution structures. This allowed for direct comparison of the in vitro-generated filaments with known AD paired helical filaments (PHFs). The study also involved a two-step seeded amplification process, where filaments generated in the first round were used as seeds for a second round, aiming to enhance and stabilize the formation of specific filament structures.

Datasets

The primary "dataset" used in this study consists of Alzheimer's disease (AD) brain homogenates obtained from deceased, de-identified consenting patients. These homogenates serve as the "seeds" to initiate the templated aggregation of recombinant tau. The study also utilized cerebrovascular disease (CVD) brain material as a control, which lacks tau pathology. No new benchmarks were introduced; rather, the study focuses on replicating known disease structures.

Key Insights and Ideas

  • Mutations Matter: The C322A and C322S mutations in tau significantly improve the reproducibility of filament assembly compared to wild-type tau. This highlights how subtle changes in protein sequence can profoundly impact aggregation pathways.
  • RT-QuIC as a Powerful Tool: The study demonstrates the utility of RT-QuIC, a sensitive assay, for generating and studying tau filament structures, extending its application beyond prion and alpha-synuclein detection.
  • Partial Mimicry is Achievable: While perfect replication of AD PHFs remains elusive, the C322A variant produced filaments that partially resemble the AD PHF structure, particularly in the protofilament interface. This suggests that even with minimal seeding material, templated seeding can occur and lead to partially disease-relevant structures.
  • Structural Diversity: Even with single-point mutations, distinct filament structures can emerge, underscoring the complex polymorphism of tau aggregation. The C322A variant formed filaments with an open C-shaped core, while the C322S variant yielded filaments with a more ordered C-terminal region.
  • Wild-Type Tau's Unpredictability: Wild-type 0N3R tau proved difficult to work with, showing poor reproducibility and primarily forming unfolded aggregates, emphasizing the need for engineered variants or optimized conditions for reliable in vitro studies.

Key Results

  • Reproducible Aggregation: The C322A and C322S tau variants exhibited reproducible aggregation kinetics in the RT-QuIC assay, with similar lag and growth phases across multiple replicates.
  • C322A Filaments Resemble AD PHFs: Cryo-EM analysis revealed that C322A tau filaments, after two rounds of seeded assembly, formed two protofilaments with a fold similar to AD PHFs for residues 323-368, although with an "open C-shaped core" at the mutation site.
  • C322S Filaments Show Distinct Structure: C322S tau formed a single type of filament with one protofilament. Its structure showed an outward turn of the N-terminal part of the ordered core and an extended C-terminal ordered core.
  • Seeding Capability: Both C322A and C322S mutant filaments were capable of seeding a second round of aggregation, indicating their stability and potential for further propagation.
  • Wild-Type Tau's Poor Performance: Wild-type 0N3R tau showed stochastic aggregation and failed to yield reproducible ThT fluorescence curves, even with increased seeding material or protein concentration.

Limitations and Future Work

The authors acknowledge that the generated filaments, while partially resembling AD PHFs, are not identical to them. The C322A filaments, for instance, have a more open core, and the C322S filaments exhibit a different structural organization. This suggests that additional factors, such as post-translational modifications or other molecular components, might be necessary for the faithful in vitro replication of disease-associated tau filament structures.

Future work could focus on:

  • Optimizing Conditions: Further refining the RT-QuIC assay conditions (e.g., salt concentration, pH, temperature) to achieve even closer structural mimicry.
  • Exploring Other Mutations: Investigating other tau mutations or combinations of mutations that might lead to more accurate AD PHF structures.
  • Incorporating Post-Translational Modifications: Introducing relevant post-translational modifications (e.g., phosphorylation) into recombinant tau to better mimic disease states.
  • Investigating the "Fuzzy Coat": The study notes that some in vitro models lack the "fuzzy coat" observed in diseased brains. Future efforts could aim to incorporate this feature.
  • Therapeutic Development: Utilizing these more accurate in vitro models to screen for and develop novel therapeutic interventions targeting specific tau filament structures.

Summary updated

Abstract

The assembly of tau into amyloid filaments is a hallmark of Alzheimer's disease (AD) and other tauopathies. Cryo-EM revealed the existence of disease-specific tau folds, which are challenging to replicate in vitro. We studied three full-length recombinant 0N3R tau forms (the wild-type and the C322A and C322S variants) using an RT-QuIC assay with brain homogenate seeding. C322A tau formed filaments resembling AD paired helical filaments (PHFs) but with a more open C-shaped core. C322S tau yielded structurally distinct filaments with an ordered C-terminal region. Both mutants seeded further aggregation, whereas the wild-type showed poor reproducibility and mainly unfolded aggregates. These results highlight the importance of optimised conditions to produce disease-relevant tau filaments and aid the development of targeted therapies. Impact statement We investigated the seeded assembly of 0N3R tau and its two mutational variants C322A and C322S, using Alzheimer's disease brain homogenates in a real-time quaking-induced conversion (RT-QuIC) assay. The C322A variant formed filaments partially resembling the AD PHF structure, showing the importance of optimised conditions to produce disease-relevant tau filaments.
BibTeX
@inproceedings{santambrogio2025serial,
  author = {Alessia Santambrogio and Sofia Lövestam and Michael A. Metrick and Thomas Löhr and Pu Xu and Nicholas C. T. Gallagher and Bernardino Ghetti and Byron Caughey and Sjors H. W. Scheres and Michele Vendruscolo},
  title = {{Serial amplification of tau filaments using Alzheimer's brain homogenates and <scp>C322A</scp> or <scp>C322S</scp> recombinant tau}},
  booktitle = {FEBS},
  year = {2025},
  doi = {10.1002/1873-3468.70141},
}
Figure