Abstract
Injection-production operation parameters—including minimum injection gas pressure (IGP), IGP interval, minimum IGP residence time, and cycle frequency—significantly impact the capacity and structural integrity of underground salt rock gas storage. This study utilizes a 3D geo-mechanical model to evaluate the long-term stability of salt caverns over a 30-year operational lifespan. By analyzing deformation, volume shrinkage, and plastic zone development, the research identifies the IGP interval as the most critical factor for cavern stability. These findings provide technical guidance for optimizing storage operations to ensure safety while meeting energy demands.
The Challenge of Underground Storage
As global energy systems transition, salt caverns have emerged as ideal vessels for natural gas storage. Salt rock possesses unique advantages: extremely low permeability, high plasticity, and a "self-healing" ability to close fractures. However, salt is also susceptible to creep—a slow, permanent deformation under constant stress.
Over decades of operation, improper pressure management can lead to excessive creep, causing cavern shrinkage, surrounding rock failure, or surface subsidence. Engineers must balance the need for high storage capacity with the mechanical limits of the surrounding rock.
Modeling and Operational Parameters
To address this, researchers established a 3D geo-mechanical model using FLAC3D software, simulating a layered salt rock storage site. The model incorporates the Norton Creep Law to predict steady-state deformation over time. The study focused on four primary operational "knobs":
- Minimum IGP: The lowest pressure maintained in the cavern.
- IGP Interval: The range between maximum and minimum operating pressures.
- Minimum IGP Residence Time: The duration the cavern stays at its lowest pressure.
- Injection-Production Cycle: The frequency of gas turnover per year.
Stability was evaluated using a multi-index approach, tracking surrounding rock displacement, the dilatancy (expansion) safety factor, volume shrinkage rates, and the volume of the plastic zone (areas where rock reaches its yield point).
Key Insights and Sensitivity Analysis
The primary driver of instability is the "in-situ stress"—the weight of the earth pushing inward. Internal gas pressure acts as a structural brace. When gas is withdrawn and pressure drops, the earth's squeezing effect intensifies, accelerating creep.
The Sensitivity Hierarchy
Through single-factor sensitivity analysis, the researchers ranked the operational parameters by their impact on cavern health: IGP Interval > Minimum IGP > Minimum IGP Residence Time > Injection-Production Cycle.
- Pressure is Critical: The IGP interval and Minimum IGP are the most influential. Higher average internal pressures better resist the surrounding earth's weight, significantly reducing displacement and volume loss.
- The Danger of "Dwell Time": Staying at minimum pressure for extended periods (residence time) is detrimental. The longer a cavern remains at low pressure, the more time the salt has to creep inward, leading to permanent volume shrinkage.
- Cyclical Fluctuations: Cavern displacement follows a "fluctuating upward trend." Displacement decreases during gas injection as the cavern is braced but surges during production phases.
Conclusion
The study confirms that while volume shrinkage typically remains within safe limits (below 20% over 30 years), aggressive low-pressure scenarios can lead to significant volume loss. To maximize the lifespan and safety of these facilities, operators should prioritize maintaining a stable IGP interval and minimizing the time the cavern spends at its lowest pressure. This research offers a vital reference for optimizing injection-production parameters in complex, layered salt formations.
Summary updated