Self-Powered p-NiO/n-ZnO Heterojunction Ultraviolet Photodetector Based on Honeycomb Nano-Mesh Structure

Nan Wang, Yang Liu, Mingyang Li, Jieting Zhao, Xiaoqi Zhang, Dayong JiangSensors 2024 · DOI

TL;DR

Researchers have developed a self-powered ultraviolet photodetector (PD) using a novel honeycomb nano-mesh structure of p-NiO/n-ZnO. This unique architecture significantly enhances light trapping and surface active sites, leading to a remarkable ~10-fold increase in responsivity and detectivity compared to traditional thin-film devices, all without external power.

What Problem Does This Paper Address?

Ultraviolet (UV) photodetectors are crucial for applications ranging from military and space to biomedical monitoring due to their sensitivity and selectivity. However, improving their performance, particularly sensitivity and anti-interference capabilities, remains a challenge. Existing ZnO-based UV PDs often struggle with efficient carrier separation and light absorption. While heterojunctions like ZnO/NiO offer self-powered operation and improved spectral selectivity, interface defects can hinder performance. This paper tackles the problem of enhancing UV PD performance by optimizing the nanostructure to improve light absorption and carrier dynamics, specifically addressing the limitations of planar heterostructures.

Methods

The researchers employed a combination of magnetron sputtering and hydrothermal synthesis to create the ZnO honeycomb nano-mesh structure on a NiO thin film.

  • Magnetron Sputtering: Used to deposit the initial NiO and ZnO thin films onto an ITO quartz substrate.
  • Hydrothermal Synthesis: This key step was used to grow the ZnO into a unique honeycomb nano-mesh structure on top of the ZnO/NiO film. This process involves controlled nucleation and growth in a solution of zinc acetate and hexamethylenetetramine.
  • Thermal Evaporation: Aluminum (Al) was used to deposit the top electrode.
  • Characterization Techniques:
    • X-ray Diffraction (XRD) for structural analysis.
  • UV-Visible Spectrophotometry for absorption spectra.
  • Scanning Electron Microscopy (SEM) for morphological characterization of the nano-mesh.
  • Current-Voltage (I-V) measurements using a Keithley 2400 source meter to evaluate device performance.
  • Responsivity and External Quantum Efficiency (EQE) measurements.

Datasets

Not discussed in the paper. The study focuses on the fabrication and characterization of a novel device structure rather than training on or evaluating against existing datasets.

Key Insights and Ideas

  • Honeycomb Nano-Mesh for Light Trapping: The macroporous honeycomb structure of ZnO is not just aesthetically interesting; it acts as an effective light-trapping mechanism. The pores cause incident UV light to reflect, refract, and scatter at various angles within the material, increasing the light's path length and thus its interaction time with the semiconductor. This leads to significantly enhanced light absorption.
  • Increased Surface Area and Active Sites: The nanostructure provides a much larger specific surface area compared to a planar film. This increased surface area offers more active sites for photogenerated electron-hole pair generation, contributing to higher photocurrent.
  • Self-Powered Operation via Heterojunction: The p-NiO/n-ZnO heterojunction naturally forms a built-in electric field due to the difference in Fermi energy levels. This field efficiently separates photogenerated electron-hole pairs, enabling the device to operate without an external bias voltage.
  • Synergistic Effect of ZnO/NiO and Honeycomb Structure: The combination of the ZnO/NiO heterojunction's inherent properties (band bending, self-powering) with the enhanced light absorption and surface area provided by the ZnO honeycomb nano-mesh structure leads to a synergistic improvement in device performance.

Key Results

  • High Responsivity: The ZnO NM/ZnO/NiO PD achieved a peak responsivity of 8.60 A/W at 330 nm under a 5 V bias. This is a significant improvement compared to conventional thin-film NiO PDs (around 0.04 A/W).
  • Improved Detectivity (D*): The detectivity of the ZnO NM/ZnO/NiO PD showed an order of magnitude improvement over thin-film PDs, indicating enhanced ability to detect weak signals.
  • Enhanced EQE: The EQE for the ZnO NM/ZnO/NiO PD reached 0.58% at 330 nm under zero bias, a substantial increase from the ZnO/NiO PD's 0.09%.
  • Good Rectification Behavior: All fabricated PDs (NiO, ZnO/NiO, ZnO NM/ZnO/NiO) exhibited good rectification characteristics in the dark, demonstrating stable electrical properties.
  • Low Dark Current: The devices showed low dark current levels, contributing to a good signal-to-noise ratio.
  • Spectral Selectivity: The devices demonstrated favorable spectral selectivity, with distinct response peaks corresponding to the absorption cut-off edges of NiO (~330 nm) and ZnO (~365 nm).

Limitations and Future Work

  • Interface Defects: While the honeycomb structure improves performance, the paper acknowledges that lattice mismatch and differences in chemical composition between ZnO and NiO can still lead to interface defect states that might trap carriers and reduce efficiency.
  • Further Optimization: The authors suggest that further optimization of the honeycomb structure's pore size, density, and the interface between ZnO and NiO could lead to even better performance.
  • Scalability and Stability: While the fabrication method is described, details on large-scale production and long-term operational stability under various environmental conditions would be valuable for practical applications.
  • Exploration of Other Materials: The success of this nanostructure approach could inspire its application with other semiconductor pairs for different optoelectronic applications.

Summary updated

Abstract

Ultraviolet (UV) photodetectors (PDs) are characterized by wide wavelength selectivity and strong anti-interference capability. The focus of research is not only limited to the adjustment of the structure composition, but it also delves deeper into its working mechanism and performance optimization. In this study, a heterojunction self-powered photodetector with a unique honeycomb structure was successfully constructed by combining the advantages of two semiconductor materials, zinc oxide (ZnO) and nickel oxide (NiO), using magnetron sputtering and hydrothermal synthesis. The detector has high responsivity, high detectivity and favorable spectral selectivity under UV irradiation. The nearly 10-fold increase in responsivity and detectivity of the detector with the introduction of the honeycomb structure under zero-bias conditions is attributed to the macroporous structure of the ZnO honeycomb nano-mesh, which increases the surface active sites and facilitates the enhancement of light trapping. This study provides significant value to the field of UV detection by improving detector performance through structural optimization.
BibTeX
@inproceedings{wang2024self,
  author = {Nan Wang and Yang Liu and Mingyang Li and Jieting Zhao and Xiaoqi Zhang and Dayong Jiang},
  title = {{Self-Powered p-NiO/n-ZnO Heterojunction Ultraviolet Photodetector Based on Honeycomb Nano-Mesh Structure}},
  booktitle = {Sensors},
  year = {2024},
  doi = {10.3390/s24237733},
}
Figure