Self-assembly and characterization of Marangoni microfluidic actuators

Christopher Morris, Babak A. ParvizJournal of Micromechanics and Microengineering 2006 · DOI

Abstract

We present a no moving parts fluidic actuator based on a solutal Marangoni effect which propels fluid in toroidal patterns. We show how to position the actuators at prescribed substrate locations by self-assembly and present experimental observations of the actuators in operation. We demonstrate how the actuators can be used to extend the range of capillary forces acting on a collection of submerged microfabricated parts leading to their self-assembly into larger structures. With one collection of microparts, a 250 µm radius actuator induced flow velocities of 5 mm s−1 in a water–ethanol solution. To explain and perform the predictive design of the actuators, we have developed a finite element model and obtained a good qualitative agreement with experimental observations. We calculated maximum non-dimensional velocities for Marangoni numbers (Ma) between 150 and 100 000, and found the velocities to follow a Ma0.695 power law, independent of Pr numbers between 530 and 1680. Both results agree with previous studies. These calculations allowed surface tension gradients in a particular experiment to be quantified, which led to the conclusion that the Marangoni actuators were equivalent to a 200 °C cm−1 thermocapillary effect operating at room temperature.
BibTeX
@article{morris2006self,
  author = {Christopher Morris and Babak A. Parviz},
  title = {{Self-assembly and characterization of Marangoni microfluidic actuators}},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2006},
  doi = {10.1088/0960-1317/16/5/014},
}

Loading related content...

Figure